How do i use airport extreme to extend the range of my imac

I have an 2012 Imac and I would like to plug the Internet to my imac and use the the imac wireless and use my airport express to extend the range of the imac wireless signal.  I am having an awfully hard time figuring this out - can anyone pass along a link to a document or any suggestions?
Thanks!

Apple's instructions for this are here:
http://support.apple.com/kb/HT4259
Although two AirPort Extremes are pictured in the example, the setup for a Time Capsule and AirPort Express would be exactly the same.
In general, a good starting location for the AirPort Express would be a point that is approximately half the distance from the Time Capsule and the area that needs more wireless coverage. You may need to experiment with the location of the Express a bit depending on the number of obstructions like walls and/or ceilings in the signal path

Similar Messages

  • Can I use an airport extreme to extend the range of my wireless modem

    Can I use an Airport Extreme to extend the range of my wireless modem?
    At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
    Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
    Regards
    Michael

    Thanks Tesserax,
    Your answer has confirmed my suspicions.
    Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices. 
    I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
    However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
    The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

  • Help: Using Airport Express to extend the range of Airport Extreme

    I am trying to use the Airport Express to extend the range of the network created by my Airport Extreme. The Express works in terms of streaming music from iTunes on the PC connected to th Extreme.
    However, I am trying to run a short Cat-5 cable out of the Express to a nearby PC in order to have access to the internet. If the Express is recognized by the Extreme and can play music through connected stereo cables, why can I get an internet connection through the LAN port..??
    Here's a real basic representation of my connections...
    Cable Modem >>-- Cat5 -->> Airport Extreme >>-- Wireless -->> Airport Express >>-- Cat5 -->>PC#2

    To wirelessly extend the range between two AirPorts, you need to configure them in a Wireless Distribution System (WDS).
    To facilitate the WDS set up, try the following:
    o Perform a "hard" reset on the AirPort Extreme Base Stations & a "factory default" reset on the AirPort Express Base Stations (AX) before setting up the WDS.
    o Place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete.
    o To avoid having to "switch" wireless networks during the WDS setup, attach each of the remote/relay base station, via an Ethernet cable, to the main base station. Of course, this would be dependent on the AirPort types used for the main/relays/remotes.
    o Be sure to jot down the MAC addresses for each of the base stations to be used in the WDS as these will be required during the setup.
    o When enabling wireless encryption, configure the relay/remote base stations first and the main base station last.

  • How do you set up an Airport Extreme to extend the range of a Verizon router?

    Basically I want to know if the new Airport Extreme can be used fro extend the range of a Verizon modem/router?

    Not by wireless. The apple routers can act as repeaters only to another apple router.
    You can use ethernet or homeplug (EOP adapter) to place the Airport in another location where you need wireless and set it up in bridge mode.
    Or you can buy another airport.. a cheap second hand extreme is very possible.. plug that into  the Verizon by ethernet and extend with the second apple wireless.. but nope.. you cannot do it directly.

  • How do I use AirPort Extreme to extend my wifi network - have BT HomeHub 5

    AirPort Extreme is plugged into my HomeHub 5 and I have set it up as extending a network using the Airport Utility, but it isn't finding the network - the light is orange  
    Please can someone help me.
    Thanks
    Joanna

    Please check out the following Apple Support article on how to configure both devices for a roaming network. The "Extend a network" mode on the AirPort Extreme will NOT work in your setup.

  • How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

    How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

    You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
    The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
    The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
    So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
    If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

  • How do I use Airport Extreme to limit internet time for my kids?  His computer is hardwired to the modem.

    How do I use Airport Extreme to limit internet time for my kids?  His computer is hardwired to the modem.

    You can set up daily time limits for each computer that connects using wireless, but it is not possible to do this when a computer is connecting directly using a wired Ethernet connection.
    Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac and click Manual Setup
    Click the Access Control tab below the icons
    Select Timed Access
    For more details on this, click the Help menu at the top of the screen and enter the following phrase into the search box:
    Controlling access to your wireless network
    A more sophisticated approach would be to use a service provided by OpenDNS. From your computer, this would allow you to monitor web sites visited, and block any unsuitable sites. More info is here:
    http://www.opendns.com/landings/familyshield

  • How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    If you have not already done so, your chances will really improve if you....
    1) Connect the printer to the USB port on the AirPort Extreme
    2) Download and install Bonjour Print Services for Windows on the PC

  • I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

    i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

    Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

  • HT4259 I am trying to connect airport express to extend the range of my airport tower. What type of cords do I need to connect the airport express to a hardwired outlet in the wall of a bedroom?

    I am trying to connect my airport express to extend the range of my network to a bedroom that is hard wired for internet. What type of cord/cords do I need to do that?

    You can connect the AirPort Express to the wall port in the bedroom for the setup.....but first....if you have not already done so.....it would be a great idea to make sure that the connection in the bedroom is working correctly.
    To do that, turn off the wireless on a laptop and connect the laptop directly to the wall port in the bedroom using an Ethernet cable. Make sure that the laptop can get a good Internet connection that way.  If it can, this tells you that the cabling is working correctly, so the Express will work well when you connect it up.
    If you don't have a laptop with an Ethernet port, then we'll have to assume that the folks that pulled the cables and installed the jacks tested things as part of the installation.
    When you are ready to install the Express, you can use an iPhone or iPad if you have one handy for the setup.

  • How do I use Airport Extreme to act as a wireless receiver for a Mac Pro?

    Hello -
    I'm trying to use an Airport Extreme (1st Generation) as a wireless receiver for a Mac Pro but I can't figure out how.  My main modem / wireless router (non-Apple) is upstairs.  My Mac Pro is down stairs.  I'm looking to get internet connection for that Mac Pro downstairs.  Is it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
    Thanks for the help.
    Nathan

    Is it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
    Unfortunately, Apple designed their routers to work with other Apple routers. It would be extremely unilikely that the AirPort Exteme could be configured to work with a router from another manufacturer.
    The AirPort Extreme would need to be configured to "Extend a wireless network", but an error message is almost surely to occur when you try this.
    There are other alternatives, but they would involve more hardware. Post back if you are interested.

  • How do I use airport express to extend my wireless network?

    How vcan I extend the range of my wireless network using Airport Express?

    It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
    The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
    name of the wireless network
    the correct wireless security settings
    and correct password.
    "Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
    But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
    Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
    This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
    Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
    The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc.  Extremely limited.
    Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
    Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
    If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
    Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet.  What exactly would that achieve?
    That is a completely different subject since this discussion is about extending a wireless network using wireless only.

  • Use airport extreme to extend time capsule network

    I have tc and an airport extreme. I want to use the airport extreme to extend my network and because I can use it to connect my directv receiver directly by ethernet. How do I set up the second router to act as an extension?

    Won't using WDS (which is harder to set up) prevent use of 802.11n mode? It's my understanding that WDS is limited to 802.11b/g modes. This would be obviated by simply using the AEBS to extend the existing network and configuring the TC to be extended, correct?
    I don't know. I have 1 802.11n Airport Extreme and a Snow 802.11b/g Airport Extreme and an 802.11b/g Airport Express.
    I have only experimented with WDS between the Snow and Express so I can not speak about 802.11n.
    However, if the Time Capsule and Airport Extreme are still supporting 802.11b/g then they must operate in the 2.4GHz frequence range. This will limit 802.11n performance. This is why I use my 802.11n Airport Extreme in 5GHz ONLY mode servicing just the 802.11n devices, and I use the older Snow and Express in Bridge mode to support my 802.11b/g devices using the 2.4GHz frequences.
    The only way I know to properly extend an 802.11n network is to create a *Roaming WiFi Network*. This involves running an ethernet cable from the Time Capsule to the Airport Extreme. Then configure the Airport Extreme and Time Capsule so they have identical SSID, WiFi encryption method, and password. In addition, the Airport Extreme -> Internet -> Internet Connection tab must have "Connection Sharing:" set to "Off (Bridge Mode)" so that the Time Capsule provides all the routing services and there is only 1 subnet in the home.
    Of course I'm willing to learn new tricks, so if there is a way to wirelessly extend the 802.11n network and stay in the 5GHz frequences, I am interested, as you never know, some day I will most likely own another 802.11n base station.

  • I have an old airport that still works, can you use it the same way that one uses an airport express to extend the range of an airport extreme base station?

    It would save me a few bucks if I could use an old airport that I have to extend the range of a new airport extreme.  My concept would simply be to use the old Airport the same way I would use a newer Airport Express as a slave repeater.  Is this doable?

    Both the new AirPort Extreme and older AirPort Express will have to be configured using Apple's WDS settings to provide more wireless coverage. 
    Here are the downsides:
    WDS operates only at "g" wireless speeds, so you will lose all of the faster "n" wireless capability of the new AirPort Extreme
    WDS cuts the bandwidth on the entire network in half, so you will have a "g" wireless network running at half speed.
    WDS is difficult for most users to configure because it is easy to make a mistake and hard to recover without starting all over again
    Bottom line......Saving a few bucks will be very costly in terms of performance on your network.

  • How do I resolve error 10057 when trying to set up my airport express to extend the range of my wireless network

    I have a Dell XPS running on Windows 7 and use an AirPort Extreme 802.11n Wi-Fi to get wireless internet access for other laptops in the home. I want to connect an AirPort Express 802.11n into the network to wirelessly extend the range of my wireless network. I have installed the AirPort Utility but when I attempt to connect to the AirPort Express, it gives me an error code 10057 and says I should check the internet connection. I have tried resetting the TCP/IP settings on my PC but that did not fix the issue. The Airport Express is also flashing yellow rather than solid green. Has anyone found a fix for this issue?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

Maybe you are looking for