How do I use Bengali Font corerectly while using G Mail and receive also
While trying to Use bengali font to send e mail the translation do not show correct font in Bengali.Receiving e mail in bengali translation also same problem.
Please advise solution
you can try Avro Keyboard
* http://omicronlab.com/download/setup_avrokeyboard_5.1.0.exe
Similar Messages
-
Using aol mail and receiving emails but not able to send.
After successfully using itouch very frustrated with new ipad2. Receiving emails fine but still trying to send emails. Not very computer lit but husband is!
Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works.
This may be of some help as well.
http://convert-dvd-ipad.com/dvdipad/set-aol-email-account-ipad-manually/
Obviously make sure that all of the information has been entered correctly including your username and passwords and that you are using upper and lower case letters as you should be using in your password since it is case sensitive. -
1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?
HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck -
How can I change the fonts in "contacts" when printing mail labels
How can I change the fonts in "contacts" when printing mail labels ? I used to be able to do this but in Mavericks this ability seems to have gone away. Am I missing something ?
Actually in my case it doesn't work. I used to be able to pull up the font window with it but the button merely flickers when I click it. The image selection button and font color both are functional. WEIRD. I don't think this is a Mavericks issue as I recall having it come up with one of my user profiles before installing. Now I can't make it happen with either of my user profiles.
I don't seem to have printing issues in other applications. And I recently reset the fonts in a futile attempt to correct this.
I may post a new topic in Mail Contacts and Calendar if there is no response here after a bit. -
How we will use these Job_open and Job_submit job_close??
Hi Experts,
i am new in Developement, i need one help here my problem is
I have one issue which is a report here i am getting the data into internal table, that data fetching i want to schedule it in background job..
can any body tell me how can i use the JOB_OPEN and JOB_SUBMIT function modules....
plz provide any example..
Thanks in Advance,
Venkat NHi,
Here is the sample program
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
host like msxxlist-host.
data: begin of starttime.
include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
exporting
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
importing
jobcount = jobcount
exceptions
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
if sy-subrc ne 0.
"error processing
endif.
Insert process into job
SUBMIT zreport and return
with p_param1 = 'value'
with p_param2 = 'value'
user sy-uname
via job jobname
number jobcount.
if sy-subrc > 0.
"error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
exporting
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
exceptions
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
others = 99.
if sy-subrc eq 0.
"error processing
endif.
Regards
Sudheer -
How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.
The following has instructions: OS X Mavericks: Share your Internet connection
-
I have bought an used Iphone 5. I dont have the password for the existing login id of the old owner. How do i use the phone and change the log in id?
Unfortunatly the only way that you can get it off is to get the old user to input the password. You may need to contact that old user and see if he can put the old password in. hope this helps.
-
With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
How can I use apple mail (linked to gmail) and get it to only do autofill on the contacts that I have in apple address book? Everytime I write an email on the Apple mail app (as well as in Gmail) it recommends a bunch of emails that are not my contacts. I want it to just autofill for the contacts that I have in my address book. Is this possible? Thank you. I have an Imac Intel version and an Iphone 5 phone.
Mail > Window > Previous Recipients
-
How can i use this sript and loade another movie?
Hi there, i used the following script to load a movie from the server;
var request:URLRequest = new URLRequest("url string");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
How can i use this sript and loade another movie? Can someone help me please?
[edited by moderator]Sir, I changed it from:
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Dir.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
to
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Warning.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
When i expord the movie i get the following error.....
Scene 1, Layer 'Layer 3', Frame 1, Line 6 1151: A conflict exists with definition request in namespace internal. -
How do i change the font in preview pane in Mail?
how do i change the font in preview pane in Mail?
Mail > Preferences > Fonts & Colors
Press the "Select" button and select. -
How shall I use my IMac and MacBookPro, with synchronized files
Hi, how shall I use my IMac and MacBookPro, with synchronized files? I used to work at home and office with those to machines and finally always have different version of my documents. Is there any dispositive that I should use, where all my files are moving with me? os there is something to synchronized the computers using WiFi or bluetooth?
The following has instructions: OS X Mavericks: Share your Internet connection
-
How can I use the battery and let it be perfectly healthy?
Hello everybody!
I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
(Right now I'm performing the battery calibration)
I'd like to know how can I use the battery and let it be perfectly healthy.
For instance,
1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
2) I usually use to calibrate the battery once a month... Is it a good thing?
Thanks!
AndreaEverything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
http://discussions.apple.com/thread.jspa?threadID=1764220 -
I use Apple Mail and dislike Outlook. If I create a note in Apple Mail, move it to my desktop for easy access and then open the note, it opens in Outlook. How do I stop Outlook from opening? Do I need to uninstall Outlook? Will it disrupt other software?
Open Apple Mail, and open Preferences (under Mail in the Menu Bar). On the General tab, check the "Default Email Reader" and set it to Mail (6.6).
-
I am going overseas to Singapore how can I use my ipad2 and my iPhone without it costing me a fortune. I am in Australia
iPhone - Locating wireless carriers
The above will provide carriers in Singapore that you can use. You would get the SIM card from the carrier. Of course if you are somewhere that has WiFi service then you won't need the cellular connection.
Maybe you are looking for
-
Using a function in a check constraint
Hi, I created a domain table(id, code, domain_code, description) and foreign keys to this table. To ensure that a valid domain is put in the column I created a function that returns a boolean and has two parameters (id and domain_code). It returns tr
-
How can i get the value when the field name is user defined
Hi, I have a one java method: public ResultSet countUserDb(String id) { ResultSet rs = null; con = dbcon.connect(); String queryString = ("select count(*) as count from db_allocation where user_id='"+id+"'"); Statement stmt = con.createStatement(); r
-
After Making some tests(Message Mapping) , Ive realized that is possible to map data-fields of different types (char v/s int) without error exists. is this possible for that it happens to this? Did I make any mistakes on steps?
-
Inspection after inbound delivery( VL31N) before GR( MIGO)
Hi Qm Guru... My client senior is after PO they do inbound delivery T-code VL31N. then Migo (GR). 1)My client want after the inbound delivery there they want to quality inspection (inspection lot may be manual or auto)..after the inspection they can
-
Inspection plan for all materials GOODS Receipt
Hi qm experts, I have a scenario. How could I make an inspection plan which covers all materials with variable base unit of measure. Its because my client is using winlims for their results recording. I want to create only one inspection plan to inco