How do I use existing TM backup with upgraded Airport Extreme?

I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?

djlstewart wrote:
I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information
No, it won't show that until a backup is done. See #B3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?
It should just do an incremental backup.
|
But, you need to know, backing-up that way is "iffy" and +*not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).

Similar Messages

Can I use a USB drive with the Airport extreme (not the new one) for Time Machine?

I thought I heard that using USB drive for Time Machine over wifi will work with the new, tall Airport Extreme, but not with the previous model, which I have. Anybody know for sure?
thanks.

It is not recommended.. Apple says it doesn't work.. for some people it does for others it is unreliable.. do you really want unreliable backups.
See http://pondini.org/TM/Airport.html

How can I extend a wireless network with my AirPort Extreme Base Station?

Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUser

The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

How to connect an HP 111 designjet with my airport extreme 2nd gen with bonjour for windows

Hi:
I have an HP 111 Tray, plug into an airport extreme 2nd Gen, both works properly running in a PC with windows 7.
When I start Bonjour for windows it identify de printer, but when i continue my printer is not in the list, I used the browse buttom and selected the .inf file that is contained in the driver and Bonjour collapsed everytime
Any one can Help me??
Thank you guys
Hola:
Ante todo buenos dias, os cuento mi problema:
Tengo una impresora gran formato HP 111 Tray (con bandeja) enchufada a un router Airport Extreme de Apple de 2ª generacion, ambos funcionando correctamente y con las ultimas actualizaciones de firmware, el caso es que al abrir el asistente BOnjour para imprimir en red a la hora de seleccionar la impresora no aparece entre las opciones disponibles, a pesar de reconocerla. Al darle a examinar para que utilize los datos de Información sobre la instalación (.inf) que me he bajado de la pagina, Bonjour se queda colgado siempre
He probado desde dos ordenadores diferentes conectados a la red y nada
Alguien sabe como puedo solucionarlo.
La impresora se conecta con un USB al router de Apple
Muchas gracias de antemano

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

What is the best modem to use in the UK with the airport extreme?

Hi I need to get a new modem having recently bought an airport extreme. What would be the best modem to get for use in the UK? Thanks

Even if a theoretical "best" modem might exist.....I think you would agree that it would be of little value if your provider did not support it in the event of connection difficulties.
The best modem to use would be one that your Internet Service Provider supplies or supports.
If your provider supports the Draytek Vigor 120, that product might be one to add to your "look" list.
Vigor 120 ADSL Modem - Draytek

I have a MacBookPro, an iPad and an iMac using a wifi connection with an airport extreme base station. Lately I am having trouble with connection time outs. Right now the laptop and ipad are connected okay but the iMac has timed out and I can't reconnect

Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering resetting the airport as detailed in the manual. If I do this will it act as a new one and can I set it up as from the beginning. My Mac is running OSX 10.6.8 and if I try to use the airport setup assistant it tells me i can't use this version of the app with the version of my OS (because I have upgraded my OS ) I assume
I get a message saying my network requires a WPA password and when I put it in it says connection timeout - meanwhile here I am on my laptop and connecting okay to the net that way - so strange.
If I connect directly to the computer I have a good connection so it is not my ISP
I am 64 and a woman and I thought I was reasonably savvy having had Macs since 1992. This has me stumped and I really would like some advice - otherwise I think I'll just go iout andf buy a new airport.
And just so you know . . . I have a smart TV and it is connecting to the net okay!

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

I want to use my WD HD with my Airport Extreme

It is plugged into the AEBS via USB. It is formatted Mac OS Extended (journaled).
It is not showing up.
It does show up if plugged directly into my macbook Pro 13"
Please advise!
Thanks
Star

Your AEBS should show up under the SHARED heading when you open the Finder. If you then click on the AEBS icon, a folder with the name of the drive should appear in the window to the right.
If you don't "see" the devices try this:
Click in an open area of the desktop so that the Finder menus are displayed at the top of the screen.
Click Finder, then click Preferences, then click the General tab
Under the heading of "Show these items on the desktop", make sure that there is a check mark next to "Connected Servers"

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

How do I use iCloud to backup my Macbook Pro?

How do I use iCloud to backup my Macbook Pro?

Hi Rob
It sounds like my problem is the same as yours..... Sorry, but I'm a bit of an iPad dummy so am writing for some more clarification...
My problem is..... I am away from home and only travelling with my iPad, however we have sold our house and my bigpond email address on my iPad is getting clogged with all the solicitors stuff etc, so I really need these emails for my files...
I want to be able to backup these up (so that I can retrieve them later to print out and file) and delete them from my iPad...
I've just created an iCloud email account (I think) is this what you did? So should I forward all my emails to this iCloud email account? And will I be able to retrieve them later?
I hope you login here to see my question.....
Thanks Janet

How do i use existing email address for digital editions

how do i use existing email address for digital editions

Three possibilities.
1) If you already have an up to date Adobe account with associated email, you need to register it with ADE.
menu/Help/Authorize Computer (Library/Authorize Computer on the older more reliable v1.7.2).
2) If you already have an Adobe account/ID and have books that have been bought using it, then you should change the email associated with that account.
Login at the adobe.com website ('sign in' near top right), using the old email the account is currently associated with.
(Doesn't matter if this is no longer valid as an email address, it is still valid to access your Adobe account)
Choose 'My Information' on the 'Welcome' dropdown, enter your new email in the appropriate place, and confirm changes.
You will later need to validate that new email address by clicking on the confirmation email it will send.
Then follow step 1.
If you have an old account and the email is no longer valid and you've forgotten the password, try Adobe Live Chat to get access to the account again.
3) You need to create yourself a brand new account.
Click the 'sign in' and choose 'Dont' have an Adobe ID'.
Once you have established oe, go to step 1

How do I use Edge Web Fonts with Muse?

How do I use Edge Web Fonts with Muse - is it an update to load, a stand alone, how does it interface with Muse? I've updated to CC but have no info on this.

Hello,
Is there a reason why you want to use Edge Web Fonts with Adobe Muse?
Assuming you wish to improve typography of your web pages, you should know that Muse is fully integrated with Typekit. This allows you to access and apply over 500 web fonts from within Muse. Here's how you do it:
Select a text component within Muse, and click the Text drop-down.
Select Add Web Fonts option, to pop-open the Add Web Fonts dialog.
Browse and apply fonts per your design needs.
Muse also allows you to create paragraph styles that you can save and apply to chunks of text, a la InDesign. Watch this video for more information: http://tv.adobe.com/watch/muse-feature-tour/using-typekit-with-adobe-muse/
Also take a look at these help files to see if they help you:
http://helpx.adobe.com/muse/tutorials/typography-muse-part-1.html
http://helpx.adobe.com/muse/tutorials/typography-muse-part-2.html
http://helpx.adobe.com/muse/tutorials/typography-muse-part-3.html
Hope this helps!
Regards,
Suhas Yogin

How do I use Qt and OpenGL with Visual Studio

Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
Embedded firmware design(C and Assembly).
The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
Thanks
Alexandros

Hi ClassicalGuitar,
The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

How do i use my mac book with my HP 6510 e all in one series printer

how do i use my mac book with HP photosmart 6510 e all in one series

Hello Marilynatsea,
Thanks for using Apple Support Communities.
To learn more about printing in OS X on your Mac, and how to add a printer, take a look at the article linked to below.
Mac Basics: Printing in OS X - Apple Support
Cheers,
Alex H.

How do I use my gigaware webcam with my mac?

How do I use my gigaware webcam with my mac? I just bought this webcam on amazon http://www.amazon.com/gp/product/B00IJE0ISS/ref=oh_aui_detailpage_o07_s00?ie=UTF 8&psc=1 and I want to use it with my mac. Is there an adapter or any software to make it compatible? Thanks.

Your amazon link states, in part, that this webcam is:
Compatible with Microsoft Windows 7,Vista, XP, 2000
Use a Mac OS X Compatible Webcam like one of those shown in the linked article instead.
For best compatibility and security, also update your OS X Mavericks (10.9.2) to the current OS X version by restarting Mac and then downloading and installing OS X Mavericks 10.9.4 Update (Combo).

How do I use a foot pedal with my mac?

how do I use a foot pedal with my mac to use on YouTube?

Can you be more specific? What kind of foot pedal? What is the foot pedal used for?

How do I use existing TM backup with upgraded Airport Extreme?

Similar Messages

Maybe you are looking for