How do i use garageband with external keyboard?

i have a clavinova cvp-105 and am trying to hook it up with garageband to record muisc. I have a midi in and out to usb connected to my mac mini and garageband sees the midi divice, but wont record or even show the imput, even though it sees it. how do i make grageband use the keyboard?

blackspectrume wrote:
I have connected correctly ( to my knowledge)
see the FAQ entry to be sure
blackspectrume wrote:
 you cant record a electric piano with midi you have to use audio in and out... is that right/true?
you can't record sound via MIDI:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • Kernel Panic when using Garageband with Blue Snowball USB mic

    *HI ALL,*
    *I purchased Mac Pro recently about 3 weeks ago. I am on the latest updates including the recent firmware update. However whenever I use garageband with external USB mic(Blue Snowball) my Kernel Panics and OS freezes and forces me to Power On again. It happened 20 times so far in few hours.*
    *I opened garageband first time today after bought this external mic from apple store. I did not use garageband without this mic plugged into USB, I only used garageband with MIC plugged in and in couple of minutes to 5 minutes of using garageband the Kernel Panic occurs. Need your help please. Here is the message I get after login again which I reported consistently to Apple. Any immediate help is appreciated. I use iMove, iPhoto and other apps without any problem. Harddisk verification went o.k.*
    Sun Apr 6 22:13:35 2008
    panic(cpu 7 caller 0x001A8C8A): Kernel trap at 0x004209d5, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x0000000c, CR3: 0x013fe000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x0ea7c3c0, ECX: 0x1059f4f0, EDX: 0x85ccfb8c
    CR2: 0x0000000c, EBP: 0x85ccfb08, ESI: 0x0ea7c3c8, EDI: 0x0ea7c3d0
    EFL: 0x00010202, EIP: 0x004209d5, CS: 0x00000008, DS: 0x11ac0010
    Error code: 0x00000002
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x85ccf8f8 : 0x12b0f7 (0x4581f4 0x85ccf92c 0x133230 0x0)
    0x85ccf948 : 0x1a8c8a (0x461720 0x4209d5 0xe 0x460ed0)
    0x85ccfa28 : 0x19ece5 (0x85ccfa40 0x4256f6 0x85ccfb08 0x4209d5)
    0x85ccfa38 : 0x4209d5 (0xe 0x85cc0048 0x10 0xe920010)
    0x85ccfb08 : 0x42028d (0xea7c3c0 0x85ccfb8c 0x0 0x0)
    0x85ccfb58 : 0x420c0e (0xea8b700 0x420978 0x85ccfb8c 0x0)
    0x85ccfba8 : 0x6055d9 (0xea7c3c0 0x0 0x85ccfc08 0x615b08)
    0x85ccfc08 : 0x609a11 (0xe92a000 0xeed0240 0xf56bff 0x0)
    0x85ccfc68 : 0x86334bde (0x13c56800 0xeed0240 0xf56bff 0x0)
    0x85ccfcd8 : 0x86334ddd (0xfbe4400 0x2 0x1 0x14)
    0x85ccfcf8 : 0x86335056 (0xfbe4400 0x14 0xf7f4a80 0x7c79d6)
    0x85ccfd38 : 0x86335156 (0xfbe4400 0x54 0x0 0xf7f4a80)
    0x85ccfd88 : 0x9f2e64 (0xfbe4400 0x8634d000 0x862c1010 0x110a)
    0x85ccfdf8 : 0x9eec9f (0xfd03600 0x10506588 0x110a 0x3ea740)
    0x85ccfe68 : 0x9ee169 (0x13d7d000 0x110a 0x13c4c940 0x13dbab7c)
    0x85ccfea8 : 0x43c47e (0x13d7d000 0x110a 0x55f 0x1)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleUSBAudio(2.5.4b4)@0x86326000->0x8634cfff
    dependency: com.apple.iokit.IOAudioFamily(1.6.4b7)@0x9e4000
    dependency: com.apple.iokit.IOUSBFamily(3.0.8)@0x5ff000
    com.apple.iokit.IOAudioFamily(1.6.4b7)@0x9e4000->0x9fafff
    dependency: com.apple.kext.OSvKernDSPLib(1.1)@0x9e1000
    com.apple.iokit.IOUSBFamily(3.0.8)@0x5ff000->0x626fff
    BSD process name corresponding to current thread: GarageBand
    Mac OS version:
    9C7010
    Kernel version:
    Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386
    System model name: MacPro3,1 (Mac-F42C88C8)

    I've been getting a number of kernel panics when using USB Mics with Skype, though I have not experienced any crashes when using Garageband.
    The crash report cited the AppleUSBAudio driver as the culprit. Here's the set up:
    MacBookPro Core2 2.66 15"
    Mac OS X 10.5.2
    Blue Snowflake USB Mic, Blue Snowball USB Mic
    Skype (latest rev - 2.7.0.257)
    AppleUSBAudio.kext version 2.5.6b3
    Seems to be a lot of crashiness with USB Audio in 10.5.2 - let's hope we see a patch soon

  • How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    iPod touch User Guide (For iOS 4.3 Software)

  • How do you scroll up and down using arrows on external keyboard

    Trying to use features on external keyboard.

    The whole page moves, not the pop up window.  The window does not show all of the information so I need to scroll down. Any other suggestions?

  • How to set "display mode" from external keyboard

    I have an EliteBook 8570p in a docking station, with an external monitor and keyboard attached.
    I typically have my display mode as "duplicate", with the same thing  showing on both my laptop screen and external monitor.  I use the external monitor as the main screen. This might be uncommon, but I prefer it this way.  I've been working this way for quite a while.
    I very recently started using MS PowerPoint 2013.  Today I discovered an annoying bug with this combination.  I was in "slideshow mode" for a pptx I was working on, and I pressed ESC to get back to editing the doc.  What happened was that the external monitor just showed my background wallpaper, and the laptop screen showed the normal display, along with my background wallpaper.  I then had to slide over to my laptop keyboard and press Fn-F4 and set it to "Duplicate", and that restored my external monitor display.
    I'm definitely going to pursue this weird behavior with PowerPoint, but I'm going to assume out of the box that this will be difficult to change.  What I'd like to get from this forum is simply a quicker way to restore the "Duplicate" display mode.  Is there a keyboard shortcut I can use from my external keyboard to change the display mode?  There's no "Fn" key.

    Although I'd still like to get an answer to this, my original problem has been solved, as I was able to disable the feature in PowerPoint 2013 that mucked with my display mode (turn off "Use Presenter View").

  • How can i use a second external webcam on my MacBook Air 11

    How can I use a second external webcam with my MacBook Air 11" 2011?
    Are there specific compatible webcams?
    Can both cams be use at same time?
    How would I choose which cam would be the active one, for example with FaceTime or Skype?
    Thanks for any tips.

    paolo@spring wrote: How can I use a second external webcam with my MacBook Air 11" 2011?...
    Plug it in and launch the app you will use to run it.
    paolo@spring wrote: ...Are there specific compatible webcams?...
    Yes.  In general, any current USB model (will meet the "UVC" standard) can work on any Mac running Mac OS X 10.4.8 or newer.
    More specifically:
    (1) You have a choice of many Mac-compatible USB cam.  Some examples of current compatible cams are described at  http://www.mac-compatible-web-cam.com/.
    (2) If you want a wireless cam, consider http://ecamm.com/mac/webcam/bt1/
    (3) OS X already has everything it needs for Mac-compatible cams.  I recommend that you not add any OS X software that comes with your chosen camera to your OS X Mac, at least until you have tested your new cam without adding anything.
    paolo@spring wrote:... Can both cams be use at same time?...
    Multiple cameras can be connected at one time, but asking your Mac to actually use (capture and process) more than one video stream at a time might cause processor and data bus capacity problems.  The normal method is to connect your cameras and switch between them as needed, actually using only one at a time.
    paolo@spring wrote:... How would I choose which cam would be the active one, for example with FaceTime or Skype?...
    The software you use to operate the cameras controls that.  For more info, start with the answer in this topic link.

  • How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

    How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

    If you want to listen to the sounds of your drum set, you should use an audio cable and connect it to the computer's line-in, then create a real instrument track.
    If you use a Midi/USB interface, you'll have to create a software instrument track and select one of GB's drumsets as the instrument. Hopefully your drumset's midi notes are mapped to the right sounds in GB.

  • I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

    I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

    try
    http://support.apple.com/kb/ht2589

  • How can I use LCCS with ActionScript 3 and Flash CS4?

    Hi,
    Using Stratus I was able to create an an application using Action Script 3 and Flash CS4.  The sample code on the Adobe site was quite straight forward and easy to understand.  I now want to switch over to  LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS.  Do I need to know Flex to be able to use LCCS?  Everything was quite simple and easy to understand with Stratus and makes complete sense.  But LCCS is really confusing.  Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client.  There is nothing in the  LCCS SDK that covers Flash and Action Script 3.  Please help!  I found the link below on some forum but it takes me nowhere.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

    Thanks Arun!
    Date: Thu, 29 Apr 2010 11:44:10 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
    Hi,
    Welcome to the LCCS world.
    Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a  pretty basic app, but should help you moving.
    We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
    Thanks
    Arun
    >

  • How can I use Bluetooth with another devices?

    How can I use Bluetooth with another devices?

    You can set up your FaceTime account in Settings > FaceTime.

  • How do I use tether with droid ultra, keep getting message to call verizon. Do Verizon charge or have to somehow change my account?

    How do I use tether with droid ultra, keep getting message to call verizon. Do Verizon charge or have to somehow change my account?

    Verizon Wireless Customer Support wrote:
    Hi there JByrd,
    Let's take a closer look into this. What plan are you currently on? If you are on the More Everything plan, then you shouldn't have to do anything additional. If you are on the Nationwide plan it is an additional $20 a month for 2 GB of data. Let us know what plan you have. Thanks!
    ErinW_VZW
    Follow us on Twitter @VZWSupport
    Hey Erin how about you confirm to Elector and others that you HAVE to pay for tethering on Nationwide plans and that if you are using a 3rd tethering app to bypass paying you are violating the terms of service. They don't seem to believe me.

  • How can i use ipad with apple tv

    How can i use ipad with appletv

    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • External display's brightness can no longer be controlled with external keyboard in 10.8.2

    I can no longer control external display's brightness with external keyboard.
    Until now my external keyboard controlled external display's brightness and MBPr's keyboard MBPr's brightness. Now the only way of changing external display's brightness is via Display preferences which is cumbersome
    Is there any way of going to pre 10.8.2 settings?

    I noticed that the keyboard and tablet were'nt working when plugged into a usb hub or monitor usb port.  I had to plug in the keyboard and tablet into a mbp usb port where they worked.  For some reason, after plugging them back into the usb hub they worked again.  Could just be dumb luck though.

  • How do I use windows with my mac

    How do I use windows with my imac?  I need to know which program I need.

    use the built in boot camp or a program such as Parallels or VMware Fusion.

  • HT204053 how do i use icloud with mac os x 10.6.8?

    how do i use icloud with mac os x 10.6.8?

    how do i use icloud with mac os x 10.6.8?

Maybe you are looking for