How do I use Migration Assistant to get my Mail and Keychain settings from

How do I use Migration Assistant to get my Mail and Keychain settings from my Power Mac G5 2.3Ghz? I just purchased a new 2.5 MacBook Pro which will be delivered tomorrow, and I want to to know how to transfer Mail and Keychain?
Thank You in advance for your reading and replying.
Kindest Regards,
Sebastian

Rather than using Migration Assistant, which can cause trouble with the PPC to Intel change, simply boot the G5 in FireWire target disk mode and manually transfer the following:
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist
You might want to look over Kappy's helpful guide for migrating, which covers the full process for a manual migration (including the above files).
Hope this helps...

Similar Messages

How can I use migration assistant to load my new Macbook Air?

How do I use migration assistant to load my new Macbook Air? Can this be done only wirelessly?

No, you can transfer from a Mac wirelessly, wired ethernet, Thunderbolt or Firewire. Your older Mac must have the same connection, but you can use adaptors if necessary. For example, you can use an Ethernet cable with an Ethernet-Thunderbolt adaptor if your older Mac has an ethernet port.
Wireless tends to be pretty slow (can take many hours) so it's recommended to choose a wired connection whenever you can.
Here's more information:
http://support.apple.com/kb/HT4889
Matt

How can i use migration assistant from a Power PC G4 powerbook?

How can i use migration assistant from a Power PC G4 laptop that can't run 10.5 to a new mini running Lion? Mini's MA says I have to upgrade the laptop's MA but the upgrade requires 10.5 as a minimum
help,please
jan

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

Used migration assistant to move office 2008 and now i cannot open it

I had an old MacBook from 2008, and now have a new MacBook Air. Was told to use migration assistant to move my applications. I did this and now when I go to open any programme from Microsoft Office 2008, it takes me to Microsoft Office Setup Assistant, over and over and over... Its saying that I don't need to register...
Any advice or help?

I migrated Office 2011 and other than forcing me to enter the license code again (all 2 million letters of it) everything went OK.
Note that when I tried to open Parallels desktop 6 it wouldn't open and said that it wasn't compatible with Mountain Lion and the icon had a sort of greyed out look. I upgraded to 8 and it started working. I wonder if there is any issue with Office 2008 and Mountain Lion? Probably not but it's a possibility.
You can buy an external superdrive too from Apple. I bought one for my 2010 Air. But CD sharing from another computer should work. I bring it with me when I travel to watch DVDs.

I recently purchased an iMac and used migration assistant to get all files from my emac, but now I have three user accounts. I only want one (perhaps two) accounts. I want all my music, photos and word docs from old computer in one user name

I recently purchased a mac and used a firewire to transfer my files onto my new imac with migration assistant. Now I have 3 users. I want one with all my main files (pictures, music, files from my old computer).
I don't mind having an additional "family" account so my younger daughter can't mess us things, but I can't figure out how to get files from one to the next and then delete the one user name.
Thanks,

In order to delete other accounts you must be logged into an admin account. You cannot delete the account into which you are currently logged.
When you started the new computer you were in the Setup Assistant. You created a new admin account before finishing the setup. You need to log into that account because it is an admin account. You can then delete the account you migrated from the old computer (and any other accounts you don't need or want.)
Then create a temporary new user account with admin status - name it, Temp. Log out of the current account and log into the new account, Temp. Now delete the initial account you created in Setup Assistant. You now have one account, Temp. Now re-migrate your data from the old computer. When that is completed log into the migrated account, which should be an admin account, and delete the temporary account, Temp.

How can I use Migration Assistant to read a backup stored in a folder on an external drive?

My MacBook Pro (Mountain Lion) died on me. I removed the hard drive and copied all the folders under my /User/stewart to an external hard drive.
I have an IMac which has just been upgraded to Mavericks. I want to transfer some of the data from my MacBook Pro to the iMac. I want to transfer my email from the MacBook Pro to the iMac, including:
- All stored emails
- All account settings
I assumed that migration assistant could do this for me. But when I tried to use it, there was no option to read from a disk that wasn't a Time Machine backup or a startup disk.
Is there any way I can move just the email onto teh Mavericks machine.
The Macbook Pro is just about to be shipped off for repair. I could get the disk out of it again and then run Migration Assistant with it. It would be very time consuming as I don't have it with me at the moment.
So I am hoping someone can help me with a quicker way.
Many thanks in advance.

Migration Assistant will recover data from a system disk or a Time Machine backup.
Since you moved the files yourself to the external drive, you are going to have to move what you have back yourself.
The files for email are stored in ~/Library/Mail. Since you did not copy them to the external, your emails are now lost.
The same goes for your account settings.
Allan

How do I use migration assistance with hard drive reader for dead macbook

Hi,
My old mac laptop died without warning.
I took it to the apple store and they suggested getting a hard drive reader and using that to transfer
across my files.
I've connected it up and have requested the migration assistant to transfer the files. Last night it
said it would 27 hours to transfer and now this morning it is saying 72 hours. This seems to
be a very long time - is it correct? Can I make it go faster or is there another way?
I've got a bit of music on there but nothing excessive. I do have about 15,000 photos though.
I'm not very techy so any assistance would be very helpful
Thanks
Sarah

Hi, that's far to long, unless maybe it's USB1.1 speed.
If USB2 or Firewire, I'd start ober & try Disk utility>Repair Disk on the external drive.

TS4345 Can I use Migration Assistant to get info from a Macbook Pro that has a dead screen?

I have a MacBook Pro 17 that the screen died on. I have a new MacBook Pro coming tomorrow and need to try to find a way to get the info from the old one to the new one. From the online info I saw on Migration Assist you need both screens to work to get a authentification code. Is there any work around? I don't know what system the old one is and have no idea what type of sharing may have been on or off.

AFAIK, you can use the Setup Assistant on first boot w/o any authentication code or sharing stuff. See Pondini's Setup New Mac guide for details.

I'm having trouble using migration assistant to get data from a windows pc over to a macbook pro mavericks. It can't resolve finding the sources wirelessly.

I have installed migration assistant on the pc. I am running it as administrator. It says waiting to connect to Mac. I am running MS on the macbook pro (brand new) and it found the machine but keeps saying looking for other sources and I can't move ahead. Any ideas?

Resolved. Someone told me verbally what to do.

HT2518 when you have used migrate assistant where does your files and photos go on a mac? i can't find any?

i have spent like last 11 hours migrating all my documents from windows to my new mac and now its complete i can't find where any of it has ben stored.
Please help.
Sasha

Welcome to Apple Support Communities
Migration Assistant creates a new user account with the transferred data. The only thing you have to do is to log out or reboot, and log in the new user, so you will access to your new data.
If you want to merge the data of both users, see > https://discussions.apple.com/docs/DOC-5472

I am using migration assistant with my old MacBook and a new iMac but I'm just getting a swirling bar and spinning wheel. No signs of any progress after an hour. Drive is about 250 gbs.

The old MacBook says "the other mac is ready" and the new iMac says "successfully connected to other Mac. They are connected via Ethernet. Shouldn't there be some sort of indication of progress? It just looks like they're stuck.
Thanks!

The old MacBook says "the other mac is ready" and the new iMac says "successfully connected to other Mac. They are connected via Ethernet. Shouldn't there be some sort of indication of progress? It just looks like they're stuck.
Thanks!

Just used Migration Assistant and can't access files, get message

I just used Migration Assistant to move files (per directions on screen) from my older iMac to new G4 running 10.4.1. It seems as though everything has transferred, but when I try to open folders that have migrated, I get a window that says, "The folder could not be opened because you do not have sufficient access privileges".
Is there a way to obtain these privileges? Not sure how to proceed. If not, should I scrap everything and just drag and drop files? I had hoped to preserve all of my settings, address books, older email (using macmail program), etc...
Any help is greatly appreciated!

Hello christine:
Do you really mean OS X 10.4.1? The current level is now OS X 10.4.11.
Try running permission repair from disk utility. If that does not work, I think I would do an archive and install on the G4:
http://docs.info.apple.com/article.html?artnum=107120
Than would install a pristine OS X (which would need to be updated while preserving your files, programs, and settings.
Barry

Some of my applications and/or folders got corrupted after using Migration Assistant

Hello,
Had an iMac with Snow Leopard installed (1 single admin user).
Also had a Mac Mini with Snow Leopard installed (1 single admin user).
Got everything transfered to a single brand new MacMini with Lion pre-installed using the following method:
- Started the new Mac Mini from scratch and used Migration Assistant during setup process to import ALL data from old MacMini (user, applications, settings and other files) using ethernet connection.
- This went perfectly well with 1 or 2 minor errors regarding 1 or 2 startup items but resolved with erasing and re-installing them.
- Applied all available Software Updates to get an updated version of Lion (10.7.5)
- Then launched Migration Assistant from the new Mac Mini to import ALL data from iMac (user, applications, settings and other files)
- This went well as I got the same message than previous transfer (all data was transferred OK)
- Also got another message saying some X folder was not compatible with targeted system and same with some CHUD folder.
I finally got my 2 admin users gathered onto the single new Mac Mini in 2 separate admin user sessions.
If an app was already transferred from the old Mini but also installed on the iMac it did not get transferred from the iMac thus keeping the Mac Mini version.
For such apps I have permissions issues and some of the folders used by the 2 different admin users such as /Movies or /Documents are locked depending on which user session is opened.
I tried repairing permissionsusing Disk Utility but with no success.
I also tried to delete and re-install these applications but it did not work.
Last chance was to grant full access attributes to the related folders via their information panel or System Preferences (User & Groups tab) but it did not work either.
Could somebody please explain the background for this issue and how could I solve it?
I am thinking of re-installing Lion from scratch, transfer the old Mac Mini again (ALL data) and then import iMac user but only USER data (not applications and settings). Would it work?
Thanks for any help you could provide,
François

I was finally able to fix this by using a couple of preference management utilities. Either I missed a key preference file for each app, or there are some hidden preference files, but when I used the prefence management utitilities (such as Preferntial Treatment, PrefEdit, Defaulter, or PlistEdit Pro) I was able to look at the prefs for Firefox and Photoshop CS2 and see where the hostname for the my old G4 was listed. (in the case of Photoshop CS2 it was actually in the list of recently opened files!! I should have noticed that from within Photoshop)
Now that I've removed those entries from preferences both Photoshop and Firefox run without prompting that the old G4 had to mounted.
oh, also... I found that for both Photoshop & Firefox I could actually get them to work without mounting the old G4's root volume - it just took clicking past the pop-ups (about 10 of them for each app) and waiting a long time as it searched around for the next one (maybe about 10 minutes total ... normally I don't have time to waste like that, but I got curious and made the time).
Thank you for your suggestions. as I had suspected, Migration Assistant moved some preferences from the old G4 that had it's hostname embedded and for some reason the apps weren't clearing them out when they were launched on the new machine (again, odd since I didn't have Migration Assistant move the apps from the old G4 to the new G5 - I installed each app on the G5 as a new install (aka: a "clean install") to avoid just this type of problem).
My real thanks are to the authors of the above mentioned preference management utilities.
Quad Core PowerMac G5 Mac OS X (10.4.3)

Can I do a clean install of 10.5 and use migration assistant from backup ?

I want to install OS 10.5 on to my Macbook. If I do a clean install rather than an archive and install can I then use migration assistant to transfer my accounts and emails from the cloned Superduper backup I have made on an external drive?
Or is Archive and Install better?

I think 99.9% of the people know what you want to do by "clean" (ie, erase or reformat) and that insures there aren't any file or directory problems when you start, that the new OS is all that will be taking up space. Clean has two connotations: Windows or OS 9. There are lots of words that are "no longer used" but everyone knows what "initialize" or reformat means and does.
If you said, "Scratch that" you could mean, "scratch that idea" even though you can't actually scratch anything. And the idea isn't in stone (scratch out) or written with a pencil where you could erase the word or line. Or draw a line through words to "scratch out the line." There can be multiple meanings. Some languages have 5 words for "blue" to denote different shades of blue, and meaning.
Your drive is 60GB which is on the small side so that is one more reason to reformat.
And because installers will create and delete a lot of files, and scatter around, I would do another SD backup (and leave your old backup as is) so you have a copy of Leopard you can boot from and that would be just Apple OS (maybe after applying the 900MB of updates required to get to 10.5.4+).
Migration Assistant has posed some problems for some with how account data is imported into a new group account. Check out http://www.macfixit.com

Using migration assistant from 10.4.11

I just bought a new Retina MacBook Pro and am trying to use Migration Assistant to migrate data from my old Macbook Pro. When I start it up on the old and new Macs, I get a message on the new Mac that Migration Assistant must be upgraded on the old Mac. Yet when I check for updates on the old Mac Tiger (10.4.11) it says none are available.
Please don't tell me I need to upgrade my old Mac to Lion before I can migrate my data? That would be a new low in Apple backward non-compatibility... (sorry, makes me grouchy).
thanks,
Scott

MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
http://www.bing.com/search?q=mac+os+x+migration+assistant
Mac OS X v10.6: How to use Migration Assistant to transfer files ...
support.apple.com/kb/HT3322Jan 18, 2012 · Mac OS X v10.6: How to use Migration Assistant to transfer files from another Mac. You can use Migration Assistant to transfer important information, such ...
How to use Migration Assistant to transfer files from another Mac
support.apple.com/kb/HT4889http://www.bing.com/search?q=mac+os+x+migration+assistant&qs=AS&form=QBLH&pq=mac +os+x+migrat&sc=5-15&sp=1&sk=#Apr 03, 2013 · You can use Migration Assistant in OS X Lion and Mountain Lion to transfer important information, such as user accounts, applications, network and …

How do I use Migration Assistant to get my Mail and Keychain settings from

Similar Messages

Maybe you are looking for