How do I use my Airport Express as my router's bridge to the Internet?

Howdy!
My apartment building recently got wifi. I want to set up my own wifi network in my apartment so I can connect my MacBook Pro, a wireless printer, and another wifi enabled computer. I want to be able to print wirelessly, and get on the Internet via the building's wifi, at the same time. I have an Airport Express (802.11n, 2008 version) and a Rosewill wireless router with 1 WAN port and 4 LAN ports.
I figure there's got to be a way to have the Airport Express in bridge mode, connected to the building's wifi, with an ethernet cable connected to the Rosewill router, which in turn would be the AP for my computers and printer. Basically this is like a regular Internet-enabled home network, except that instead of the router being connected to a modem to get the Internet connection, it's connected to the Airport-Express-in-bridge-mode (at least I assume that's the mode it should be in for this purpose).
I have searched the web, found some pretty technical explanations, and tried them, but I must be missing something because the Internet connection isn't working.
My building's wifi provider does support wireless gaming adapters (which I'm pretty sure are just bridges), and I've given them the Express's MAC address for this purpose. The Airport Express shows a green light when set up to join the building wifi network.
Thanks in advance!

I figure there's got to be a way to have the Airport Express in bridge mode, connected to the building's wifi, with an ethernet cable connected to the Rosewill router, which in turn would be the AP for my computers and printer.
The way to do this would be to configure the Express to "Join a wireless network" and check the option to Enable Ethernet Clients to activate the Ethernet port.
If you fail to enable the Ethernet port, then there will be no signal at the port...and no Internet connection.
Enter the name of the wireless network that you want to join.
The real trick will be to match up the security settings on the Express with the building's WiFi security. Unless the settings match exactly, the Express will not "join" the network....and you will not have an Internet connection. Then enter the password for the wireless network and Verify it again.
Click Update to save the settings.
As I type this, I am connected to the hotel's wireless network with my AirPort Express and have it providing an Ethernet signal to my "new" AirPort Express to deliver a dual band wireless network for the room for multiple wireless devices.
The hotel wireless has somewhat limited bandwidth, (as may your building connection) so a big download from the Internet will be slow. For regular browsing, email, things work just fine.

Similar Messages

How can I use my airport extreme to connect a windows machine to the internet? I don't have the software disks anymore...

I no longer have any disks for my airport extreme (its pre-time capsule)... how can I connect my windows machine to it in order to get to the internet?

You can directly download the AirPort Utility for Windows from Apple Support here.
Once the AirPort Extreme is properly configured for Internet access you can connect your PC to the Extreme either by a wired or wireless connection.

How do I use my airport express or time capsule to increase the signal strength of my comcast router

How do I use my airport express and/ or time capsule to increase the range of my newly installed comcast modem/router.

Neophite50 wrote:
Thanks.
A question. Do I plug the TC into the Comcast modeum Router or the iMac?
Both is good.. but at least one of your routers.. TC or express must be plugged into the router.. the imac can get internet connection by wireless.

How do I use my airport express to enhance my airport extreme?

how do I use my airport express to enhance my airport extreme?

Check my post in the thread I've linked to below.
https://discussions.apple.com/thread/3703370

Airport express second generation do not connect to the internet

Airport express second generation do not connect to the internet. I changed my location and the problem happened . Earlier it was running smoothly. I am not finding the cause of the problem. I switched on and off several times but the problem persists. Please help me.

Are you asking the make/model of the computer or the AX base station?
Neither, I was interested in the make/model of the cable modem.
Our ethernet connection was fried in an electrical storm so we had to go wireless.
Electrical storms are never a good thing when it comes to electronics. What was/is your current network configuration? Is it something like the following?
Cable modem > (Ethernet cable) > AX > (wireless) > wireless devices
Is there another router, other than the AX, in the configuration? ... or an Ethernet switch? I'm just trying to understand your network to best advise you on how to configure the AX.

How can i use 'find my iphone' if my iphone isnt connected to the internet or is currently out of battery?

how can i use 'find my iPhone' if it isn't connected to the internet or is currently out of battery?

You can't. It has to be on and able to connect to a network or it can't transmit its location.

How do I use my airport express to extend the wireless range of my NETGEAR 7550?

I am trying to extend the range of my Netgear 7550 using the airport express. When trying to set up the airport express it said that I was unable to extend the Netgear. Any ideas how to make it work?

You need to configure a roaming network.
Wi-Fi base stations: Setting up and configuring a roaming network (802.11 a/b/g/n)
http://support.apple.com/kb/HT4260

How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

How do I use my Airport Express 1st generation to extend my wireless network?

Hi all,
I've got an old time capsule (1st gen) and a 1st gen airport express in another room with a USB printer connected.
There's up to 100 meg broadband from a virgin hub, but that is connected by ethernet to my time capsule. I then configured the time capsule to be a WDS base, and the airport express to be a WDS remote.
That all worked OK.
But the internet is incredibly slow in the office (where the Airport Express is). Pages do load eventually, but VERY slowly!
I asked in the apple store if it was necessary to buy new stuff, because the internet is so slow, and the guy said that the system should work if I am using the airport express to extend the network.
I reset everything, and reconfigured as above, and it is still painfully slow.
Any ideas?
I don't mind ditching the time capsule as a base station and just having the AP extending the virgin hub if that'll work - or ditching the AP and using the time capsule to extend the virgin hub....or buying a new airport express and extending the virgin hub...I jsut want fast internet in my office room!
Thanks in advance!

To configure an AirPort Express for iTunes streaming, please check out the following Apple Support article for details.

Using Older Airport Express as an wireless/ethernet bridge

Hi there,
I noticed that people are using their Airport Express (n) products to create a bridge to wireless networks via the ethernet port on the Express.
Is this possible for older non-N Airport Expresses?
I read online that one could set up a WDS network, but I am having -no- luck doing that. Each time I try, I am prompted to enter other nodes on the WDS network, but there's a chicken and egg problem since the first node I am trying to set up keeps requiring other nodes before applying the changes to the configuration it is very frustrating.
I have an Airport Extreme (b/g) and two airport expresses (b/g) and would very very much like to connect an ethernet-run skype phone to one of the expresses. I currently use one as an AirTunes node, and the other (the one I want to use for the skype ophone) as a wireless printer node. Is it possible to use the latter as an ethernet bridge? Can I do that without setting up a WDS network? If I have to have a WDS network, what are the step by step instructions I should follow to do that for all the hardware listed above?
This seems a lot harder than it should be.

+I noticed that people are using their Airport Express (n) products to create a bridge to wireless networks via the ethernet port on the Express.+
+Is this possible for older non-N Airport Expresses?+
It is only possible with the older Express if you also have an Apple main router and setup all the devices in a WDS arrangement. If you are having difficulty setting up the WDS on your network, reference pages 42-44 in the Designing AirPort Networks Guide for a step by step procedure of this. Or, perhaps you might want to use one of the excellent posts by Tesserax for this as well. See this post.

How do I use my airport express speakers with Spotify?

Does anyone know how to use Spotify with speakers connected to an airport express. I do not want to but the AirFoil app. Surely, the is another way.

Welcome to the discussion area, mareithree!
You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

How do I use an airport express with the Apple A1121 speaker?

I have the old Apple A1121 speaker, and have only just stumbled upon the fact I could play music from my MacBookPro or other apple device through the AirPort Express wirelessly. But I don't understand how to do it? Any help would be much appreciated.

No, actually a really good question. The adapter is basically a 3.5 mm audio plug on one end and a digital optical jack on the other. It is designed to be used with a digital optical cable. Some cable providers have these in one unit. That is, the adapter is permanently attached to one end of the cable.
The following link is just one example of these types of cables/adapters.

How do I use an Airport Express as a "range-extender" for Airport Extreme?

I bought an Airport Express with the intent of using it as an "extender" for my Airport Extreme, but I find no paper that describes how this is done. Any suggestions would be appreciated.
Thanks and cheers, Veit

Thanks for the info. Try this to see if it will do the job for you:
_On your AirPort Extreme (AEBS):_
Open AirPort Utility and click Manual Setup
Click the *Wireless tab* below the row of icons
Your *Wireless Mode* should already be set to “Create a Wireless Network”
Make sure there is a check mark next to “Allow this network to be extended”
Note the setting for Wireless Security as you will need this for the next setup on the AirPort Express
Update to save changes
_On the AirPort Express (AX):_
Hold the reset button in on the AX until you see the amber light begin to blink more quickly
Temporarily, move the AX near your computer and connect a short ethernet cable from your computer to the AX
Open AirPort Utility and click Manual Setup.
Click the *Wireless tab* below the row of icons
*Wireless Mode*….should be set to “Extend a wireless network”. If you don’t see this choice, hold down the option key when you click on the selection box
Wireless Network Name…the name of your main AirPort Extreme network should appear as a choice. Click to select it.
Place a check mark next to Allow wireless clients
Wireless Security….exact same setting as your AEBS
Wireless Password…exact same password as your AEBS
Confirm Password
Click the Base Station tab to assign a name and device password for the AX, set time zone, etc.
Click the Music icon to enable AirTunes if you wish
Update to save settings. You can disconnect the ethernet cable and move the Express to the desired location.
For further reference, Apple's instructions for the "extend" setup appear on pages 43-44 in the Apple AirPort Networks Guide.
Please post back on your results.
Message was edited by: Bob Timmons

How can I use two Airport Express N's together

I have just purchased the new airport express n and I have the one that I am currently using which is also an n.
How can I use both at the same time as part of the same network?

If your goal is to extend the wireless range of one AirPort with another, check out this Apple Support article.

How do I use my Airport Express with a Blu-ray player?

Hello, first post, long time lurker. Have a question, hope someone can help me
I have an Airport Express V 6.3, currently I have it set to 'Join a wireless network' and its connected wirelessly through a Netgear router that is located on the 1st floor, I'm on 3rd floor by the way. I've been using it for airtunes, but I recently received a Sony Blu-ray Player and would like to connect it the airport express via ethernet cable.
What do I have to set up on the airport express to be able to give the blu-ray player internet?
I've noticed many threads here about airport extreme connected to express...so they weren't too helpful

Welcome to the discussion area, mareithree!
You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

How do I use my Airport Express as my router's bridge to the Internet?

Similar Messages

Maybe you are looking for