How do I use my airport express or time capsule to increase the signal strength of my comcast router

How do I use my airport express and/ or time capsule to increase the range of my newly installed comcast modem/router.

Neophite50 wrote:
Thanks.
A question. Do I plug the TC into the Comcast modeum Router or the iMac?
Both is good.. but at least one of your routers.. TC or express must be plugged into the router.. the imac can get internet connection by wireless.

Similar Messages

How to extend wireless with airport express and time capsule

So, I have a time capsule & because of the thick walls in my apartment, I can barely use my ipad and iphone at night in my bedroom! (my macbookPRO stays at 3 bars however!)
I bought an airport express thinking I could plug it closer to or inside my bedroom to boost the signal - but it doesn't seem to work that way - any tips on how to set this up?
TWO ADDITIONAL Qs:
Does connecting directly to my time capsule (which i'm assuming i'd need another ethernet cable) help with the boost? (then negates the other great uses for the airport express it seems)
Isn't there a way to do the boost with the express wirelessly? I'd really love to get wireless speakers, use airplay AND be able to use my devices just two rooms away .... HELP!
thanks so much (when did apple phone support start to be closed on Sundays?)
cheers.

Suggest that you check your setup again to make sure that the settings are correct on both the Time Capsule and AirPort Express.
Open AirPort Utility, select the Time Capsule and click Manual Setup
Click the Wireless tab below the row of icons
Make sure that a check mark is entered next to "Allow this network to be extended".( If the box is not checked, the Time Capsule will not extend to the AirPort Express)
Click Update to save your settings and close AirPort Utility
Next, open AirPort Utility again, select the AirPort Express and click Manual Setup
Click the Wireless tab
Settings should look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check mark entered next to "Allow wireless clients"
Wireless Security = Same setting as the Time Capsule
Wireless Password = Same password as the Time Capsule network
Confirm Password
Update to save settings and close AirPort Utility
Locate the AirPort Express approximately half way between the Time Capsule and area that needs more wireless coverage. You may need to experiment on placement to find the best compomise.
Post back on your results.

How do I use my airport express to enhance my airport extreme?

how do I use my airport express to enhance my airport extreme?

Check my post in the thread I've linked to below.
https://discussions.apple.com/thread/3703370

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

Airport express / extreme / Time Capsule Range

Airport express / extreme / Time Capsule Range
Can anyone please tell me what is the approximate range of Apple Airport Products.
While doing sell in Apple store customer always ask us this question and we don't had any answer for it.
So please if anyone has the answer do reply on this.
- - - Akshay k. (ACMT)

The range is about 50 meters or 150 feet.....but this assumes that the AirPort is being used in a very large open space like a aircraft hangar.....with no obstructions in the signal path.
Chances are, your home is laid out a bit differently, so without knowing a number of variable factors like.....
1) How many walls there will be in the signal path between wireless devices
2) The actual construction type of the walls, ceilings, etc
3) Heavy furniture, large mirrors, etc. in the signal path
4 ) Other wireless networks around your home
5) Other wireless devices like cordless phones, BlueTooth devices, etc.
It would be impossible to tell you what the actual range might be in your home.
In general, assuming normal modern home construction, you would not want the wireless signal to pass through more than 2 or 3 walls....since each wall will absorb on average about 15-25% of the wireless signal. A ceiling will absorb even more because of its thickness.

Conflicts with Airport Express and Time Capsule

I am using Airport Express and Time Capsule at the same time. Connection to the web is via a router. Very often I do have conflicts. How shall I connect the gadgets? At the moment I connect the router to Airport Express (network cable).
Time machine back up doesn't work properly.
Is there anybody able to help me?
Regards

What broadband type do you have?
It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
You may need to wait until Sat.
Get in a big supply of home videos or something and try and starve off your addiction.

Airport express and time capsule config?

I have an airport express for Wi-Fi internet and printing. I have purchased a time capsule as a back -up drive to work with time machine. Should I
set it up seperately from the airport express or
replace airport express with time capsule ?
What's the best config and can I retqin existing netwrok ID and password?
Thanks for pointing me in right direction.

Hi Yoreilly:
i'm not sure just what setup is right for you. and i'm sure the newer Airport Express is way improved over mine (got mine few yrs ago). but my Airport express works as extension from your Time Cap Wi-Fi. Airport does not put out wireless Wi-Fi signal on it's own.
1> if yours can take your phone line & send out Wi-fi signal on it's own, then more power to you/ & you could sell back your Time Cap & just have a WD backup drive, or seagate external drive for less.
2> otherwise, your airport express needs to connect to your Time Cap, to answer you #2.
3> usually the application helps where you have dead spots in your house, or your location of Time Cap can't reach places in your house where U need Wi-Fi signal, or where you can't thread an ethernet cable out to your printer or device.
not sure how you are setup with your wireless printer now. but if your setup allows you to print by only using the Airport Exp, sure you can use the TimeCap separately as it's own Back-up drive. the thing is it has Wi-fi capability that you wouldn't be using with that setup.
hope this helps, & didn't confuse,
m

Printing completely broken on both airport express and time capsule

Printing seems to be broken on both my old time capsul, generation one, and a new airport express. Here's what happens.
1. Connect printer directly to the Mac and everything prints fine.
2. Reconnect printer to the Airport or timecapsule. Delete all the printers. Power cycle everything. Add printer. Print and it keeps trying to connect to the printer forever.
It use to work and it may have been a recient firmware update that broke it. Any help would be appreciated. I've been through all of the support documents and still nothing. The printer is an old Epson Stylus R280. I'm running 10.9 with all the latest drivers and updates.

If you want to run a N speeds, run a cable from Time Capsule to Airport Express, set Time Capsule as your primary router, and turn off DHCP on Airport Express. This will create two networks, your Express will have one SSID, and the Time Capsule another SSID. One G network and one N network. Don't include the express in your network, keep it separate from Time Capsule to avoid it from coming down to G speeds. Make sense?

I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

Two family home sharing one Verizon Fios network. I want to use my time capsule to boost the signal in my basement apartment while still using the Fios network for the apartment upstairs. Is this possible?

Hi there,
I just moved into a basement apartment in a two family home. We share internet and cable. The signal in my apartment is mediocre at best and I wanted to use my time capsule to boost the signal in my apartment while keeping their Fios network intact upstairs. Is there any way to do this without having to turn off the wifi in the Verizon actiontec router? Any help or tips would be extremely helpful. Thanks in advance.

The only way to boost signal with apple products is to another apple product.
Or run ethernet or some other replacement for wireless. eg EOP (homeplug) adapters. These are not foolproof though.. they depend on circuits being wired via simple fuses and can at times not work.
Your other choice is to get an Airport Express.. plug it into the FIOS router and use that to establish a network.. it can also be used as a wireless bridge in the downstairs area but you can pick whichever works the best. If your wireless is reasonable at least in one location downstairs any wireless bridge could do the same thing.. and plug into the TC for your downstairs wireless.

How do I use an Airport Express as a "range-extender" for Airport Extreme?

I bought an Airport Express with the intent of using it as an "extender" for my Airport Extreme, but I find no paper that describes how this is done. Any suggestions would be appreciated.
Thanks and cheers, Veit

Thanks for the info. Try this to see if it will do the job for you:
_On your AirPort Extreme (AEBS):_
Open AirPort Utility and click Manual Setup
Click the *Wireless tab* below the row of icons
Your *Wireless Mode* should already be set to “Create a Wireless Network”
Make sure there is a check mark next to “Allow this network to be extended”
Note the setting for Wireless Security as you will need this for the next setup on the AirPort Express
Update to save changes
_On the AirPort Express (AX):_
Hold the reset button in on the AX until you see the amber light begin to blink more quickly
Temporarily, move the AX near your computer and connect a short ethernet cable from your computer to the AX
Open AirPort Utility and click Manual Setup.
Click the *Wireless tab* below the row of icons
*Wireless Mode*….should be set to “Extend a wireless network”. If you don’t see this choice, hold down the option key when you click on the selection box
Wireless Network Name…the name of your main AirPort Extreme network should appear as a choice. Click to select it.
Place a check mark next to Allow wireless clients
Wireless Security….exact same setting as your AEBS
Wireless Password…exact same password as your AEBS
Confirm Password
Click the Base Station tab to assign a name and device password for the AX, set time zone, etc.
Click the Music icon to enable AirTunes if you wish
Update to save settings. You can disconnect the ethernet cable and move the Express to the desired location.
For further reference, Apple's instructions for the "extend" setup appear on pages 43-44 in the Apple AirPort Networks Guide.
Please post back on your results.
Message was edited by: Bob Timmons

How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

How do I use my Airport Express with a Blu-ray player?

Hello, first post, long time lurker. Have a question, hope someone can help me
I have an Airport Express V 6.3, currently I have it set to 'Join a wireless network' and its connected wirelessly through a Netgear router that is located on the 1st floor, I'm on 3rd floor by the way. I've been using it for airtunes, but I recently received a Sony Blu-ray Player and would like to connect it the airport express via ethernet cable.
What do I have to set up on the airport express to be able to give the blu-ray player internet?
I've noticed many threads here about airport extreme connected to express...so they weren't too helpful

Welcome to the discussion area, mareithree!
You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

How do I use my Airport Express 1st generation to extend my wireless network?

Hi all,
I've got an old time capsule (1st gen) and a 1st gen airport express in another room with a USB printer connected.
There's up to 100 meg broadband from a virgin hub, but that is connected by ethernet to my time capsule. I then configured the time capsule to be a WDS base, and the airport express to be a WDS remote.
That all worked OK.
But the internet is incredibly slow in the office (where the Airport Express is). Pages do load eventually, but VERY slowly!
I asked in the apple store if it was necessary to buy new stuff, because the internet is so slow, and the guy said that the system should work if I am using the airport express to extend the network.
I reset everything, and reconfigured as above, and it is still painfully slow.
Any ideas?
I don't mind ditching the time capsule as a base station and just having the AP extending the virgin hub if that'll work - or ditching the AP and using the time capsule to extend the virgin hub....or buying a new airport express and extending the virgin hub...I jsut want fast internet in my office room!
Thanks in advance!

To configure an AirPort Express for iTunes streaming, please check out the following Apple Support article for details.

How do I use my airport express or time capsule to increase the signal strength of my comcast router

Similar Messages

Maybe you are looking for