How do I use my airport express speakers with Spotify?

Does anyone know how to use Spotify with speakers connected to an airport express. I do not want to but the AirFoil app. Surely, the is another way.

Welcome to the discussion area, mareithree!
You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

Similar Messages

How do i use my apple express speakers as the sound from apple tv?

how do i use my apple express speakers as the sound from apple tv?

Welcome to the Apple Community.
You can't with the Apple TV 2 or 3, with the Apple TV 1, you can choose them from the Airtunes option in the settings menu.

How do I use my airport express or time capsule to increase the signal strength of my comcast router

How do I use my airport express and/ or time capsule to increase the range of my newly installed comcast modem/router.

Neophite50 wrote:
Thanks.
A question. Do I plug the TC into the Comcast modeum Router or the iMac?
Both is good.. but at least one of your routers.. TC or express must be plugged into the router.. the imac can get internet connection by wireless.

How do I use my airport express to enhance my airport extreme?

how do I use my airport express to enhance my airport extreme?

Check my post in the thread I've linked to below.
https://discussions.apple.com/thread/3703370

How to adjust volume of Airport Express speakers on Apple TV?

Hello,
I've just setup my Apple TV (bought in November 2012).
The latest version of the firmware allows to select AirPort Express speakers as default audio output. This is great.
While watching Youtube videos or listening iTunes music, I can't find how to adjust the output volume.
I am forced to set it by using the speaker remote control which is quite frustrating.
Any clues?
I've attached a photo of the Apple TV screen while playing a Youtube video. There's an output selector. But I can't access the volume options.
Thanks a lot!

Hit "up" two times to bring up "movie menu", then hold down "select", then navigate up and over to "speakers" tab, then down to your "AirPlay speakers", then move slider to right to increase volume
DONE!!
found it here so i dont deserve the credit but you guys should know - i struggled with this for hours wondering why the streamed audio was so low
https://discussions.apple.com/thread/2600145?start=120&tstart=0

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

How do I use my airport express to extend the wireless range of my NETGEAR 7550?

I am trying to extend the range of my Netgear 7550 using the airport express. When trying to set up the airport express it said that I was unable to extend the Netgear. Any ideas how to make it work?

You need to configure a roaming network.
Wi-Fi base stations: Setting up and configuring a roaming network (802.11 a/b/g/n)
http://support.apple.com/kb/HT4260

How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

How do I use my Airport Express 1st generation to extend my wireless network?

Hi all,
I've got an old time capsule (1st gen) and a 1st gen airport express in another room with a USB printer connected.
There's up to 100 meg broadband from a virgin hub, but that is connected by ethernet to my time capsule. I then configured the time capsule to be a WDS base, and the airport express to be a WDS remote.
That all worked OK.
But the internet is incredibly slow in the office (where the Airport Express is). Pages do load eventually, but VERY slowly!
I asked in the apple store if it was necessary to buy new stuff, because the internet is so slow, and the guy said that the system should work if I am using the airport express to extend the network.
I reset everything, and reconfigured as above, and it is still painfully slow.
Any ideas?
I don't mind ditching the time capsule as a base station and just having the AP extending the virgin hub if that'll work - or ditching the AP and using the time capsule to extend the virgin hub....or buying a new airport express and extending the virgin hub...I jsut want fast internet in my office room!
Thanks in advance!

To configure an AirPort Express for iTunes streaming, please check out the following Apple Support article for details.

How can I get my airport express work with Zyxel 2812HNU-F1?

Hi,
I previously had a Thompson Speedtouch router and my Airport expres worked just fine. But now my internetprovider give me a new router the Zyxel 2812HNU-F1 and my airport express doesn't work properly. I use an ethernetkabel to connect the airport express with my router. The lamp on the aiport express turns green, but I cannot normally open internetpages etc, and sometimes a webpage partially appears. If I connect my ethernetkabel in my MBP, the internetconnection just works normally.
Do you know what I have to do to let my Aiport expres work with the Zyxel 2812? I already resetted the express and in the airport utility it doesn't show that there is a problem.
Greets,
Don

Obviously my objective was different (just use the Airport Express as an Airplay speaker over wired ethernet only), but for my case I finally managed to fix it: In the Zyxel LAN configuration I've set the LAN port (4) to half-duplex and 10Mbit (only!) instead of "auto" and then streaming audio works flawlessly! This is just crazy stupid and is a Zyxel issue I'm sure. For now I'm happy!
To make the Airport wired only: disconnect wire -> factory reset -> create new (wireless) network (plus settings) -> then Network Router Mode = Off (Bridge Mode) -> then Disable wireless -> Save settings -> only then connect ethernet cable

How do I use my airport express as my default audio for a laptop?

I can stream music from iTunes to our airport exoress no problem, but I'd like to be able to use the speakers connected to our Airport Express as the default audio output for my MacBook Pro - i.e for all sounds, aps, etc. This would allow me to wirelessly stream music or any other audio (not just iTunes) and then have it played through the speakers. I've googled and looked here, but cannot seem to find a clear cut answer that isn't two plus years old in all the clutter.
Thank you in advance.
(PS - I'm working on a MacBook Pro with the latest and currently up to date OS X 10.7.2)
Message was edited by: kldietch - ANSWER FOUND - USE AN IPAD/IPHONE TO STREAM THE AUDIO TO AIRPORT EXPRESS OR BUY AIRFOIL FOR MY LAPTOP TO CIRCUMVENT APPLE'S DECISION TO WALL OFF AUDIO OUTPUT FROM LAPTOPS TO THE AIPORT EXPRESS.

The bottom line is that you will need an application like Airfoil for Mac to be able to stream any audio source on your Mac to the AirPort Express.
Rogue Amoeba | Airfoil for Mac: Wireless Audio Around Your House

How do I use an airport express with the Apple A1121 speaker?

I have the old Apple A1121 speaker, and have only just stumbled upon the fact I could play music from my MacBookPro or other apple device through the AirPort Express wirelessly. But I don't understand how to do it? Any help would be much appreciated.

No, actually a really good question. The adapter is basically a 3.5 mm audio plug on one end and a digital optical jack on the other. It is designed to be used with a digital optical cable. Some cable providers have these in one unit. That is, the adapter is permanently attached to one end of the cable.
The following link is just one example of these types of cables/adapters.

How do I use an Airport Express as a "range-extender" for Airport Extreme?

I bought an Airport Express with the intent of using it as an "extender" for my Airport Extreme, but I find no paper that describes how this is done. Any suggestions would be appreciated.
Thanks and cheers, Veit

Thanks for the info. Try this to see if it will do the job for you:
_On your AirPort Extreme (AEBS):_
Open AirPort Utility and click Manual Setup
Click the *Wireless tab* below the row of icons
Your *Wireless Mode* should already be set to “Create a Wireless Network”
Make sure there is a check mark next to “Allow this network to be extended”
Note the setting for Wireless Security as you will need this for the next setup on the AirPort Express
Update to save changes
_On the AirPort Express (AX):_
Hold the reset button in on the AX until you see the amber light begin to blink more quickly
Temporarily, move the AX near your computer and connect a short ethernet cable from your computer to the AX
Open AirPort Utility and click Manual Setup.
Click the *Wireless tab* below the row of icons
*Wireless Mode*….should be set to “Extend a wireless network”. If you don’t see this choice, hold down the option key when you click on the selection box
Wireless Network Name…the name of your main AirPort Extreme network should appear as a choice. Click to select it.
Place a check mark next to Allow wireless clients
Wireless Security….exact same setting as your AEBS
Wireless Password…exact same password as your AEBS
Confirm Password
Click the Base Station tab to assign a name and device password for the AX, set time zone, etc.
Click the Music icon to enable AirTunes if you wish
Update to save settings. You can disconnect the ethernet cable and move the Express to the desired location.
For further reference, Apple's instructions for the "extend" setup appear on pages 43-44 in the Apple AirPort Networks Guide.
Please post back on your results.
Message was edited by: Bob Timmons

How can I use two Airport Express N's together

I have just purchased the new airport express n and I have the one that I am currently using which is also an n.
How can I use both at the same time as part of the same network?

If your goal is to extend the wireless range of one AirPort with another, check out this Apple Support article.

How do I use my Airport Express with a Blu-ray player?

Hello, first post, long time lurker. Have a question, hope someone can help me
I have an Airport Express V 6.3, currently I have it set to 'Join a wireless network' and its connected wirelessly through a Netgear router that is located on the 1st floor, I'm on 3rd floor by the way. I've been using it for airtunes, but I recently received a Sony Blu-ray Player and would like to connect it the airport express via ethernet cable.
What do I have to set up on the airport express to be able to give the blu-ray player internet?
I've noticed many threads here about airport extreme connected to express...so they weren't too helpful

Welcome to the discussion area, mareithree!
You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

How do I use my airport express speakers with Spotify?

Similar Messages

Maybe you are looking for