How do I use my Airport Express with a Blu-ray player?

Hello, first post, long time lurker. Have a question, hope someone can help me
I have an Airport Express V 6.3, currently I have it set to 'Join a wireless network' and its connected wirelessly through a Netgear router that is located on the 1st floor, I'm on 3rd floor by the way. I've been using it for airtunes, but I recently received a Sony Blu-ray Player and would like to connect it the airport express via ethernet cable.
What do I have to set up on the airport express to be able to give the blu-ray player internet?
I've noticed many threads here about airport extreme connected to express...so they weren't too helpful

Welcome to the discussion area, mareithree!
You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

Similar Messages

How do I use an airport express with the Apple A1121 speaker?

I have the old Apple A1121 speaker, and have only just stumbled upon the fact I could play music from my MacBookPro or other apple device through the AirPort Express wirelessly. But I don't understand how to do it? Any help would be much appreciated.

No, actually a really good question. The adapter is basically a 3.5 mm audio plug on one end and a digital optical jack on the other. It is designed to be used with a digital optical cable. Some cable providers have these in one unit. That is, the adapter is permanently attached to one end of the cable.
The following link is just one example of these types of cables/adapters.

How do I use my airport express or time capsule to increase the signal strength of my comcast router

How do I use my airport express and/ or time capsule to increase the range of my newly installed comcast modem/router.

Neophite50 wrote:
Thanks.
A question. Do I plug the TC into the Comcast modeum Router or the iMac?
Both is good.. but at least one of your routers.. TC or express must be plugged into the router.. the imac can get internet connection by wireless.

How do I use my airport express to enhance my airport extreme?

how do I use my airport express to enhance my airport extreme?

Check my post in the thread I've linked to below.
https://discussions.apple.com/thread/3703370

Can I use the airport express with a desktop computer that is not wire less- I want to have wifi in the house for an iphone

Can i use the airport express with a desktop computer not wifi- I want wifi for my iphone

I can't seem to find any information anywhere. It seems like it should work since the AX is showing up on his wifi settings on both his iPhone and iPod. Not to mention the Apple "Genius" told him that it should work. However, they also told him that it came with an ethernet, USB and the stereo patch cables...

How do I use my airport extreme with my FIOS router?

How do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would lik to access them.

Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

How do I use an Airport Express as a "range-extender" for Airport Extreme?

I bought an Airport Express with the intent of using it as an "extender" for my Airport Extreme, but I find no paper that describes how this is done. Any suggestions would be appreciated.
Thanks and cheers, Veit

Thanks for the info. Try this to see if it will do the job for you:
_On your AirPort Extreme (AEBS):_
Open AirPort Utility and click Manual Setup
Click the *Wireless tab* below the row of icons
Your *Wireless Mode* should already be set to “Create a Wireless Network”
Make sure there is a check mark next to “Allow this network to be extended”
Note the setting for Wireless Security as you will need this for the next setup on the AirPort Express
Update to save changes
_On the AirPort Express (AX):_
Hold the reset button in on the AX until you see the amber light begin to blink more quickly
Temporarily, move the AX near your computer and connect a short ethernet cable from your computer to the AX
Open AirPort Utility and click Manual Setup.
Click the *Wireless tab* below the row of icons
*Wireless Mode*….should be set to “Extend a wireless network”. If you don’t see this choice, hold down the option key when you click on the selection box
Wireless Network Name…the name of your main AirPort Extreme network should appear as a choice. Click to select it.
Place a check mark next to Allow wireless clients
Wireless Security….exact same setting as your AEBS
Wireless Password…exact same password as your AEBS
Confirm Password
Click the Base Station tab to assign a name and device password for the AX, set time zone, etc.
Click the Music icon to enable AirTunes if you wish
Update to save settings. You can disconnect the ethernet cable and move the Express to the desired location.
For further reference, Apple's instructions for the "extend" setup appear on pages 43-44 in the Apple AirPort Networks Guide.
Please post back on your results.
Message was edited by: Bob Timmons

How to set up the airport express with a linksys wireless-g broadband router

I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

If that is all that is done, the Express would not provide more wireless coverage. Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area. As per my above comment, one Express connects via Ethernet to the Linksys. The second Express provides the extension.
You must have misunderstood what I was saying.
Linksys is providing a wireless network.
The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
The Express is located on the other side of the house, for example.
The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
The Express is configured in Bridge Mode
This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
Although this is an "extended" network, it is technically known as a "roaming" network.
This is what I was suggesting as a possible alternative without having to buy more hardware.

How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

Can I use my Airport Express with Motorola Modem SB6121?

I just bought a Motorola Arris SB6121 Modem and wonder if I can use my Airport Express at my main router. I live in a condo so it is not a huge space.
Thanks!

After using a functioning system for 2 years, I am no longer able to connect through Airport Extreme base station to internet with Motorola SB6121. Hard wire connection with Motorola works fine. Connection to wireless network works fine (but without internet connection). Have flashing yellow light on Extreme. Have been online to diagnose and fix, but without success. Here's what I've tried. Disconnected power to Motorola and Extreme for 30 minutes. Disconnected coax cable from wall and from Motorola. Disconnected Ethernet cable from Motorola and Extreme. All of these steps were simultaneous.
Then 1) reconnected power to Motorola, 2) reconnected coax cable to wall and Motorola, 3) connected ethernet cable from Motorola to my PC laptop and 4) got to the internet just fine. Then I reconnected power to Extreme, 2) moved ethernet cable from laptop to Extreme, but 3) no internet connect available (altho wireless network is working and I am connected). Also I have tried plugging the ethernet cable into both the <--> and "O" ports on the Extreme without any benefit.
In Control Panel and Network and Sharing Center I see my connection to my wireless network, but no internet connection. When I connect Motorola to laptop with ethernet cable, I see "network 8" with internet access/connection. My laptop's wireless feature is on.
I downloaded and installed Airport Utility, but it does not see my Extreme either by wireless or cable connection directly to the Extreme)..
Do I need to "reset" Extreme? BTW, I am a renter and the Extreme and Motorola have been in the apartment for 2 years working fine. I don't have any documentation for the Extreme that I might need for resetting. I hope it will do this automatically. Also, I am getting cable TV through Comcast. I do not have phone service through Comcast (cell only).
OK, this is probably more than you need to know, but I wanted to give you all the information toi address my basic question, "how do I get to the internet through my home wireless system?"
BTW, when cable connected to Motorola, speed shows 100 mbps.
Thanks in advance for your assistance.

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

How do I use my Airport Express 1st generation to extend my wireless network?

Hi all,
I've got an old time capsule (1st gen) and a 1st gen airport express in another room with a USB printer connected.
There's up to 100 meg broadband from a virgin hub, but that is connected by ethernet to my time capsule. I then configured the time capsule to be a WDS base, and the airport express to be a WDS remote.
That all worked OK.
But the internet is incredibly slow in the office (where the Airport Express is). Pages do load eventually, but VERY slowly!
I asked in the apple store if it was necessary to buy new stuff, because the internet is so slow, and the guy said that the system should work if I am using the airport express to extend the network.
I reset everything, and reconfigured as above, and it is still painfully slow.
Any ideas?
I don't mind ditching the time capsule as a base station and just having the AP extending the virgin hub if that'll work - or ditching the AP and using the time capsule to extend the virgin hub....or buying a new airport express and extending the virgin hub...I jsut want fast internet in my office room!
Thanks in advance!

To configure an AirPort Express for iTunes streaming, please check out the following Apple Support article for details.

How do I use my airport express to extend the wireless range of my NETGEAR 7550?

I am trying to extend the range of my Netgear 7550 using the airport express. When trying to set up the airport express it said that I was unable to extend the Netgear. Any ideas how to make it work?

You need to configure a roaming network.
Wi-Fi base stations: Setting up and configuring a roaming network (802.11 a/b/g/n)
http://support.apple.com/kb/HT4260

I have a nokia siemens router. Can I use apple airport express with this to expand my wi-fi range

I HAVE A NOKIA SIEMENS ROUTER. THROUGH THAT I AM USIING WI-FI NETWORK AT MY HOME. I WANT TO EXTEND ITS RANGE SO I BUY AIRPORT EXPRESS. CAN I USE WITH THIS ROUTER

Please do not type in all capital letters. It is difficult to read and appears as if you are SHOUTING.
You can use the AirPort Express to provide more wireless coverage for your router if you connect an Ethernet cable from the router to the AirPort Express and configure it to "create a wireless network" using the same wireless network name, security settings and password as your Siemens router.
If you are asking if you can use the Express to extend the wireless network using wireless only, it is extremely unlikely that this will work since Apple's "extend" a wireless network feature appears to work only with other Apple products.
As far as we know, it is not compatible with devices from any other manufacturer.

Share files on Time Capsule with wireless Blu Ray player?

We're looking at getting a Blu Ray player with built in wireless to take advantage of Amazon Prime streaming and Hulu Plus. Star Trek; TNG remastered on Bl Ray also promped me in this decision!
We already have an AppleTV and tried jailbreaking to get access to Hulu and Amazon, but the hack caused numerous issues, so back to stock it went.
I have also started ripping all of my DVDs and importing them into iTunes, but with a baby in the house it's REALLY an issue to always have a laptop open and running whenever we want to watch one of our movies. I've looked at a number of Blu Ray players that include DLNA capabilities, plus file sharing via SMBA and UPNP. My question is, will the Time Capsule serve up those files to the player? I tried DLNA shares directly through our Samsung HDTV before and it just did not work.
Does anyone have experience with a make/model of Blu Ray player playing nicely with a Time Capsule and/or an additional storage device attached to a Time Capsule?
I have also read that I absolutely, positively do NOT want to go wireless, but to use Ethernet instead. Our TV is clear on the other side of the house from the modem/Time Capsule so I'd have to pull at least 100 feet of cable to make that happen. I don't think there's any conduit into the attic at the front of the house either, since the cable box comes in in from the exterior wall, so it could be a real job. Any thoughts on that?

There are no media players in the TC whatsoever.. it is completely dumb box.. and is unsuitable as a media centre.. it is not even a file store, as it has no way to back itself up.. it is a backup target for Time Machine.
If you want DLNA you need to run a computer of some sort and use a player that can read the files and play them directly.. ie no streaming.
On the wireless to other side of the house, I do think you will have issues. Ethernet is still far superior solution and if you own the house consider it an investment in future usage.
But for now Ethernet Over Power adapters can offer superior performance to wireless and far better reliability. They are not without issues, so buy from store that offers no questions asked return.. and don't bother too much with super fast ones.. the 200mbit/s are already well above what is reality. You cannot use them on power boards generally so you also might need to think of ways around that.
If you do get stuck with wireless the TC is slow.. 2.4ghz is only 130mbps.. and range is not great. I would recommend a different device like ubiquiti router that offers high power and long range.

How do I use my Airport Express with a Blu-ray player?

Similar Messages

Maybe you are looking for