How do I use my backup machine to check what is available

I have permanently connected to my Mac laptop computer a Maxtor 500 GB backup machine so all my important file etc. are saved.
I have never tried to utilise and look at the content of this Maxtor machine - but would like to know how to do this, also, do you have any comments on
this machine and backup procedures generally.
Regards Jramble79

Choose File>Vault>Restore Library. Aperture will show you an alert that your old library will be renamed. If this is OK click restore. After the restoration is complete Aperture will prompt you to relaunch Aperture. After relaunch you'll see another dialogue box. If everything is OK click Recover Now. The next feedback you'll get is Recovery Complete. Click OK and you're done.
Jeff

Similar Messages

How do I use my Time Machine as an external hard drive to just dump files no longer needed on my computer?

How Do I use my time machine as an external hard drive?

Time Machine is software that allows a Mac to backup to a Time Capsule or other hard drive, so I think you are asking about the Time Capsule here, correct?
http://www.apple.com/timecapsule/
How do you plan to connect the Time Capsule to your network, or is it already connected and configured?
When you have it configured on the network, you can use the Finder to copy/paste or drag/drop files from your Mac to the Time Capsule disk.

How to restore using increment backup after full backup restore in RMAN?

Hi All,
We have a files of full backup of database after turning on the Archive log.
And after that, daily incremental backup is taken.
Now, i want to restore the the database into a new machine using both files of full and incremental backups. Can anybody give me script for restore of full backup and after that restore of incremental backup?
Thanks,
Praveen.

Praveen,
>>
In my case, i have 2 sets of backups. One is full backup and other is incremental backup. In order to keep the restored database upto date, i need to restore the full backup and then restore incremental backup. Now, i got any idea how to restore using full backup. My doubt is how to update the restored database with incremental backup also?
>>
Restore always looks for level 0 backup, not the incremental backups.
Incremental backups comes in picture during recovery.
During Recovery, Oracle looks for incremental backups, if exists, it will do the recovery with the incremental backups, if no incremental backups available, then, it will look for archived logs.
Therefore, incremental backups never used during restore, they are used only during the recovery.
Jaffar

I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. with the Pages app open how do I use the Time Machine to go back five hours to see the work?

I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. With the Pages app open how do I use the Time Machine to go back five hours to see my page? Can I access Time Machine within an app like Pages? How do I enter Time Machine within the application? It always takes me to the Finder. I apolgise for the mumbo jumbo. I simply do not know how to use Time Machine. It makes sense when I follow the Tutorial but then I lose it.

OK. You've kind of skipped over the reason why you want to go back five hours, but my assumption would be that you've made changes to a Pages file that you want to revert.
There are two ways to tackle this. From Pages itself, open the current version of your document, and from the File menu, click Revert To, and Browse All Versions. You'll then be in the Time Machine interface for that file, and can browse back to the version you want.
Or, outside of Pages, you can select the file (or the folder it was originally in, if you've since deleted it) and enter Time Machine from the TM menu (it sounds like you've already tried this?)
best
Matt

How can i use "icloud backup" with ios 4.2.1?

How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.

You cannot.
It requires ios 5.
Your iphone can only go to 4.2.1

HT1766 I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

Connect phone to computer.
Select Restore.
Tell iTunes which of the available backup files to use, let iTunes restore it.
Also, try reading the User's Guide as it answers questions like this.

How do i use my backup?

hey guys, im going to try and make the story short and to the point.
basically, i had a macbook pro and i backed it up and then it got water damaged. so now i have the backup on a external hard drive but MY macbook is fried. my dad is letting me use his now so thats good. my question is, how do i use the backup on my external hard drive? i want to make a separate user on my dads computer and use the backup of my old computer on that user.
Thanks guys
-Mods

Your best bet is to log on to an Admin account and use +Migration Assistant+ to transfer your user account. See [Using Migration Assistant|http://web.me.com/pondini/AppleTips/Migrate.html].
You may or may not want to transfer applications; that's an all-or-nothing situation. See the pink box there titled *Transferring Applications* for more.

How can i use microsoft office on the mAC - what app do i purchase? help?!!

how can i use microsoft office on the mAC - what app do i purchase? help?!!

What aspect of Microsoft Office? Office is a suite of programs... Word, Excel, Powerpoint, etc.
You've got several potential options. Libre Office and Open Office (both googleable) are 'open source,' free, downloadable programmes that will open most MS Office programmes and perform many of the functions of MS Office. Might be an idea to have a look round for reviews (etc) first, to see if they sound like they'll match your needs.
If you're keen to use the App Store, there's Apple's own suite of programmes: Pages, Numbers and Keynote. They're a word processor, spreadsheet programme, and presentation-type programme with similar functions to Word, Excel and Powerpoint respectively. They're pretty good for most functions, and are better integrated with Macs than MS programmes. They're excellent programmes for what they do, and relatively cheap (about £14 each?).
But if you're heavily reliant on MS, want ALL the bells and whistles of MS, or need to regularly transfer files between MS programmes on other computers and your laptop / desktop computer, then they might not be the best of ideas. Keynote - IME - can have some difficulties in transferring formatting to Powerpoint.
Finally, there's MS Office Mac 2011. You can't download MS Office from the App Store, but can order the CDs from most online stores (including Apple's own store). It might be worth price hunting - if you're a student, you can usually find the programmes relatively cheap (£38 at the moment on Software4Students, though you'll need to belong to an academic institution / have a UK .ac email address). Apple's own prices on MS software are unlikely to be the best prices out there (though the product will be identical).
MS Office includes Word, Excel and Powerpoint in the basic version. The slightly more expensive version (which, I think, is the £38 one on S4S) includes Outlook. Which - IME - is far more of a nuisance than Apple's native Mail programme.
(I should probably add - I'm an academic. I own both Apple's own programmes, and MS Office 2011. I tend to use the MS programmes more, if only because they're the ones that other people tend to use, and transferring between Apple and MS programmes is a minor inconvenience. Pages also lacks Garamond, my favourite work font. The Apple progs are, however, far more beautifully integrated, and would be MORE than good enough for most users...)

(How) Can I use Existing Time Machine On New Mac Without Erasing Original TM Backups?

I just got through doing a clean install from Mavericks to Yosemite and now I'm trying to attach and recognize the original Time Machine Drive (TMD)
I chose to install as a new computer and did not choose a Time Machine backup option because the original TMD was not attached at the time of installation.
Upon arriving at the desktop and connecting my original TMD, I was able to see it in finder but Time Machine did not automatically accept it.
I am able to see the disk in Time Machine but it doesn't tell me that its got data on it .
HERE'S THE ANXIOUS MOMENT: If I select TMD, which is the original, will it overwrite all that orignal information, or will it continue adding to it?
I've read under different parts of the forum that if you go through this process during the original setup and the Time Machine drive is attached to the computer then you will be prompted to inherit the old Time Machine. Since I didn't have the drive attached, I didn't see that.
Now back to desktop and into the Time Machine utility: This option to inherit doesn't seem to exist or is obvious. The only option after selecting the drive in Time Machine is "Use Disk". If I click this, will it erase my original data or will it ask to inherit the drive? It's not very clear what will happen after I click "Use Disk".
Thanks so much to anyone who can help, Jeff

Thanks for the link. I went there but didn't find any information on how to inherit the backup history. The link says "If you’re replacing an old Mac and want the new Mac to use the backups from the old one, click Inherit Backup." At what point in the migration process does it ask "to specify whether you (I) want a new Mac to inherit a backup"? It seems like I got quite a few levels into Migration assistant and the last click that I did not click seemed like it was good to start the process without telling me anything about inheriting anything.
Any suggestions or did I not go far enough?
From Apple Website below
OS X Yosemite: If you want a new Mac to “inherit” your backup history
You can move the backup history from one Mac to another, but after the new Mac “inherits” the backup history, you can’t use the backup history on the original Mac.
You’re asked to specify whether you want a new Mac to inherit a backup if you do any of the following:
Use Migration Assistant to transfer your settings from an old Mac to a new one.
Use Migration Assistant to transfer your settings from a Time Machine backup of an old Mac to a new one.
Clone the disk you use to start your Mac, or physically move it from an old Mac to a new Mac.
Replace your computer’s main board.
If you’re replacing an old Mac and want the new Mac to use the backups from the old one, click Inherit Backup.
If you plan to continue to use your old Mac, click Create New Backup to preserve the backup history and start separate backups for the new Mac.
Connect a new backup disk to your Mac
Transfer your info from a PC
Last Modified: Nov 18, 2014

How can I use the Time Machine Backups from my Old Computer?

I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
Thanks
Richard

Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
http://www.macosxhints.com/article.php?story=20080128003716101
It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

HOW DO I USE THE BACKUP DISKS TO RESTORE MY SETTINGS AFTER A HAED DRIVE CRASH?

I RECENTLY HAD TO SET MY COMPUTER TO THE FACTORY SETTINGS AFTER A SYSTEM RECOVERY. HOWEVER
BEFORE DOING THIS I BURNED 7 BACKUP DISKS TO SAVE MY SETTINGS. NOE HOW DO I USE THESE DISKS
TO RESTORE MY ORIGINAL SETTINGS?

Hi
Put in your first recovery disc, then go into your BIOS and set the your cd/dvd drive as the first boot device, exit saving settings, your computer should restart and boot off your recovery disc.

How do I use a backup of a pse 8 catalog as my new catalog on a new computer w/pse 13?

Hi,
The title explains what I'd like to do but am not sure how to accomplish this. The new computer is windows 8.1 64 bit. Any suggestions?

Use the backup and restore method, starting in the PSE8 Organizer.
These instructions relate to version 6 onwards.
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

How do i use a Time Machine from another computer from Time Capsule with multibackups

Can Iuse a Time Machine from another computer from Time Capsule with multibackups

Not sure what you are asking here.
Time Machine is software on a Mac that is used to backup that Mac to a Time Capsule hard drive.
Are you asking if another Mac can backup to the same Time Capsule that other Macs are already using?
Or, if not....please clarify on exactly what you want to do.

If I use a backup machine that has a folder of my iphoto library, can I delete my Iphoto library without the machine updating and deleting the photos as well?

Hey everyone, I have a Lacie 1 TB back up machine that I use to backup every once in a while everything I have in my macbook pro.
I don't know if there's a difference between a hard disk in which you save whatever you want or a back up machine that backs up whatever you have in your computer once you connect it, so, My question is the following:
Having backed up my Iphoto (I checked if there's a folder in the machine with all my photos), can I now get rid of all my photos in the laptop so there's more space? If I delete my photos (in Iphoto), does the back up machine automatically update its folders and delete my saved iphoto contents as well?
Thank you!
I'm doing this because my laptop is running really slow lately and makes a lot of noise (like an airplane getting ready for take off) even though I've used it for a year.
I use a Macbook pro 15''
OS X Version 10.8.4
processor: 2.2 GHz intel core i7
Memory 8GB 1067 MHz DDR3
Startup disk : macintosh HD

Okay:
Except an arrow turning in circle near the ''wireless'' or ''sound'' symbols on the top of the screen. If I click on it, I see ''enter time machine'', ''back up now'', ''open time machine preferences''.
You're using Time Machine to back up to the External Disk.
Back to your first question:
Having backed up my Iphoto (I checked if there's a folder in the machine with all my photos), can I now get rid of all my photos in the laptop so there's more space?
No.
Time Machine keeps a rolling back up of your data. Eventually, anything you delete from your Mac will be deleted from iPhoto too.
If space is an issue then get another HD. They're not expensice and you can put your iPhoto Library on it.
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

How to keep using existing Time Machine backup after replacing main hard drive

The hard drive in my iMac (Lion) is failing. I cloned it to a new drive and installed it in the iMac. Now the system wants to start fresh with a whole new Time Machine backup.
It seems obvious that there must be a way to keep using the existing Time Machine backup set, but I can't figure out how to do it. Help, please.

If you had done a full system restore from Time Machine, it would have been done automatically. But 3rd-party cloning apps don't leave a "trail" so Time Machine can figure out that the new drive has all the old stuff on it.
Effective with Lion, there is a way to "associate" the new drive with the backups of the old one, but it requires the use of Terminal. See #B6 in Time Machine - Troubleshooting. As noted though, this only works on directly-connected backup drives, not backups made over a network.

How do I use my backup machine to check what is available

Similar Messages

Maybe you are looking for