How do i use my factory warranty ?

My camera fogged up and i would like my phone to be replaced or fixed. I just got my phone last month and know that apple has a warranty to fix these things within a year i just dont know how to get that started.

If you don't have an Apple Store in your area, see the "How do I obtain service" section here:
http://www.apple.com/support/iphone/service/faq/
Regards.

Similar Messages

  • How can I use the Warranty on my LaserJet Toner Cartridges ?

     I have accumulated a total of 4 malfunctioning LaserJet toner cartridges in the last 6 months and I seem to be stymied trying to do anything. They are for LaserJet models 5, 6p, and 2100, and the failures are each unique print quality problems, move from printer to printer with the toner cartridge and  are all completely resolved by using another toner cartridge. Each of the cartridges yielded between 100 and 800 pages before failing, outlasting the 14 day return policy at local Staples where they were purchased. None of the cartridges depleted its toner supply.
    The Warranty Return Card in the package is very simple. It says "this toner cartridge is warranted to be free from defects in materials or workmanship during its useful lifetime", and "does not apply to cartridges that have been refilled or to those which are simply empty as a result of normal use."
    HP's Limited Warranty Statement at http://welcome.hp.com/country/us/en/privacy/limite d_warranty.html under the heading "HP Limited Warranty Statement - LaserJet Print Cartridges and Imaging Drums" seems simple and  straightforward,  "HP LaserJet Print Cartridges and Imaging Drums are warranted to be free from defects in materials and workmanship" then a clause excluding cartridges refilled, tampered abused, or simply worn out from use, "To obtain warranty service, please return the product to place of purchase (with a written description of the problem and print samples) or contact HP customer support. At HP’s option, HP will either replace products that prove to be defective or refund your purchase price."
    N.B.: There is no period stated for the Warranty, nor is there any on the Warranty Return Card in the product package. Also, these toner cartridges do not contain any smart chips, toner depletion sensors, etc.
    When I tried to return the cartridges to Staples, they called HP and were told by HP I had to have my receipt to prove the cartridges were less than 1 year old, and then that they wouldn't take them back at Staples anyway but that if I called HP would "mail me one". Since I buy a spare to sit next to a printer for when it runs out of toner, I'm not sure they were all purchased within the last 12 months, only that they were put into service within the last 12 months.
    When I called HP support they opened up a trouble ticket for my printer and said someone would get back to me within 10 days. I'm half expecting to get an email in 10 days apologetically noticing that HP no longer supports any of these printers. An email to ship them somewhere far away and expect a reply in 90 days is a definite possibility. I definitely don't expect an HP field service technician to arrive at my door to service the toner cartridges in person.
    I don't understand how to use the Warranty. I've (over) paid for piles of genuine HP LaserJet Toner cartridges and having 4 fail for quality problems in the last few months got my attention and its enough money to chase it rather than tossing them like the other 6 or 7 defective ones over the last 10 years.
    Does anyone know how to actually get a replacement toner cartridge for a defective one? Please tell me the Warranty isn't just smoke and mirrors...

    Sorry to say.  TheHP Warranty is worthless.  I have a friend witht eh EXACT same problem.  DOA cartridges (2 BRAND SPANKING NEW ONES).  One fail about half wai the other did not even over 600 pages.  At $140 per cartridge (plus tax) that is about 21 cents per page plus the cost of paper.  That is color inkjet prices.  And that does not take into account cost of electricity, printer, and time wasted to buy the worthless cartridges.
    I listen in his last tech call and I had to go out because it was enfurating.  The technician even email him prve that the toner had NP time based warranty and still in the same breath said our policy is that the warranty is 1 year.  Huh?  What the #%^&* !  Really?  I mean REALLY?  Is like sending you a picture of a perfectly blue sky as proof and telling you that the sky is red with yellow dots.  I hope there is  class action lawsuit agains HP since they are clearly ripping people off.  And the sad part is that some small businesses will also get screw since they sell HP cartridges and some actually say in their web site that the cartridges aare warranted for life. 
    I would say either:
    - Do NOT buy HP cartridges
    - Never stock spare cartridges
    - or btter yet, buy another brand of printer.
    I actually have the same printer simlilar to his and I used generic with no problems.  Plus I buy my cartridges for $35 if he had done the same he would had at least $400 towards another printer so even if the toner blows up and destroys his printer he would have enough money to buy a replacement.
    Check out this link
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01848047&jumpi...
    it actually says:
    "There is no expiration date for the use of HP toner cartridges."
    This came from the tech guy at HP!
    And then he had the guts to say it is a 1 year warranty?  This only can happen when you have tech support in India.  I guess in India's English no expiration means 1 year.  I have not found an Indian English to American English dictionary but I am sure that is what it should be because they guy did not even hesitated for 1 second when he send that and said it.
    Welcome to HP!

  • How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

    How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

    If you purchased AppleCare + within 30 days of getting your iPhone 5 you are allowed 2 instances of breakage replacement with a $49 deductible. If you do not have AppleCare + accidental breakage is not covered under you warranty, you can do an out-of-warranty replacement for $229.

  • How to use singloeton factory methods ?

    Hi Guys,
    Can any one   please help me like how to use singleton factory  methods in oops? i am very new to  OOPS concepts ?
    Thanks in advance

    PRINTER - part2
      METHOD constructor.
        "initial printer cartridge fill
        me->number = i_number.
        me->cartridge = i_units.
        me->cost = me->cartridge * 10.
      ENDMETHOD.                  
      METHOD increase_cost.
        cost = cost + i_units.
      ENDMETHOD.                   
      METHOD consume_cartrigde.
        cartridge = cartridge - i_units.
      ENDMETHOD.                   
      METHOD get_total_cost.
        DATA lo_printer TYPE REF TO lcl_printer.
        LOOP AT it_printers INTO lo_printer.
          r_cost = r_cost + lo_printer->get_cost( ).
        ENDLOOP.
      ENDMETHOD.                 
      METHOD get_cost.
        r_cost = cost.
      ENDMETHOD.                
      METHOD get_cartridge.
        r_cartridge = cartridge.
      ENDMETHOD.                   
      METHOD get_number.
        r_number = number.
      ENDMETHOD.                  
    * helper method to show current state of printers
      METHOD show_printers.
        DATA lv_mess   TYPE string.
        DATA lv_number TYPE i.
        DATA lv_cartridge  TYPE i.
        DATA lv_cartridge_c TYPE c LENGTH 5.
        DATA lv_cost TYPE i.
        DATA lv_cost_c TYPE c LENGTH 5.
        DATA lv_number_c TYPE c LENGTH 2.
        DATA lo_printer TYPE REF TO lcl_printer.
        LOOP AT it_printers INTO lo_printer.
          lv_number_c = lv_number = lo_printer->get_number( ).
          lv_cost_c = lv_cost  = lo_printer->get_cost( ).
          lv_cartridge_c = lv_cartridge = lo_printer->get_cartridge( ).
          CONCATENATE lv_mess 'Printer:' lv_number_c ', cost:' lv_cost_c ', cartridge:' lv_cartridge_c
                      cl_abap_char_utilities=>cr_lf INTO lv_mess SEPARATED BY space.
        ENDLOOP.
        MESSAGE lv_mess TYPE 'I'.
      ENDMETHOD.                   
    ENDCLASS.  
    CLIENT
    DATA go_printer  TYPE REF TO lcl_printer. "printers
    DATA go_job TYPE REF TO lcl_job.          "job
    DATA  gv_mess TYPE string.
    DATA: gv_number TYPE i,
          gv_number_c TYPE c LENGTH 10.
    SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME.
    PARAMETERS: pa_print  TYPE i OBLIGATORY, "printer number
                pa_units TYPE i DEFAULT 100. "initial printer filling
    SELECTION-SCREEN PUSHBUTTON /10(15) addp  USER-COMMAND fcadd  VISIBLE LENGTH 15.
    SELECTION-SCREEN PUSHBUTTON /10(15) refil USER-COMMAND fcref  VISIBLE LENGTH 15.
    SELECTION-SCREEN PUSHBUTTON /10(15) show  USER-COMMAND fcshow VISIBLE LENGTH 15.
    SELECTION-SCREEN PUSHBUTTON /10(15) print USER-COMMAND fcprnt VISIBLE LENGTH 15.
    SELECTION-SCREEN PUSHBUTTON /10(15) total USER-COMMAND fctot  VISIBLE LENGTH 15.
    SELECTION-SCREEN END OF BLOCK bl1.
    SELECTION-SCREEN BEGIN OF BLOCK bl2 WITH FRAME.
    PARAMETERS: pa_col   TYPE c1,
                pa_pages TYPE i,
                pa_numb  TYPE i. "to which printer you want the job be send to
    SELECTION-SCREEN END OF BLOCK bl2.
    INITIALIZATION.
      addp = 'Add printer'.
      show = 'Show printers'.
      print = 'Print'.
      total = 'Total cost'.
      refil = 'Refill'.
    AT SELECTION-SCREEN.
      CLEAR: gv_number, gv_number_c, gv_mess.
      CASE sy-ucomm.
        WHEN 'FCADD'.
          go_printer = lcl_printer=>factory( i_number = pa_print
                                             i_units  = pa_units ).
        WHEN 'FCSHOW'.
          IF go_printer IS NOT BOUND.
            MESSAGE 'Add at least one printer first' TYPE 'E'.
          ELSE.
            go_printer->show_printers( ).
          ENDIF.
        WHEN 'FCPRNT'.
          IF pa_pages IS INITIAL.
            MESSAGE 'Provide number of pages' TYPE 'E'.
          ENDIF.
          CREATE OBJECT go_job EXPORTING i_pages = pa_pages i_color = pa_col.
          IF lcl_printer=>get_printer( pa_numb ) IS NOT BOUND.
            gv_number_c = pa_numb.
            condense gv_number_c.
            CONCATENATE 'Printer' gv_number_c 'doesn`t exist, select correct one' INTO gv_mess SEPARATED BY space.
            MESSAGE gv_mess TYPE 'E'.
          ELSE.
            go_printer->print( i_number = pa_numb
                               io_job   = go_job ).
          ENDIF.
        WHEN 'FCTOT'.
          IF go_printer IS BOUND.
            gv_number_c = gv_number = go_printer->get_total_cost( ).
          ENDIF.
          CONCATENATE 'Total cost of all printers for printing and initial cartridge filling is: ' gv_number_c INTO gv_mess
                      SEPARATED BY space.
          MESSAGE gv_mess TYPE 'I'.
        WHEN 'FCREF'.
          IF lcl_printer=>get_printer( pa_print ) IS NOT BOUND.
            gv_number_c = pa_print.
            CONCATENATE 'Printer doesn`t exist' gv_number_c INTO gv_mess SEPARATED BY space.
            MESSAGE gv_mess TYPE 'E'.
          ELSE.
            go_printer->fill_cartridge( i_number = pa_print
                                        i_units = pa_units ).
          ENDIF.
      ENDCASE.
    Regards
    Marcin

  • How to confirm iphone 4s factory unlocked

    how to confirm iphone 4s factory unlocked

    There is an easy way to confirm if an iPhone is factory unlocked or not, by using its IMEI.
    Just check your IMEI number at this website : http://www.imei.info/
    You will get all details including warranty and sim lock.
    Thank you.

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • HOW DO I USE THE BACKUP DISKS TO RESTORE MY SETTINGS AFTER A HAED DRIVE CRASH?

    I RECENTLY HAD TO SET MY COMPUTER TO THE FACTORY SETTINGS AFTER A SYSTEM RECOVERY. HOWEVER
    BEFORE DOING THIS I BURNED 7 BACKUP DISKS TO SAVE MY SETTINGS. NOE HOW DO I USE THESE DISKS
    TO RESTORE MY ORIGINAL SETTINGS?

    Hi
    Put in your first recovery disc, then go into your BIOS and set the your cd/dvd drive as the first boot device, exit saving settings, your computer should restart and boot off your recovery disc.

  • How do I use my deactivated Droid 2 as a media player?

    I know it's possible, because I used it for a while after I got my iphone and then my son used it with his number temporarily  when he broke his phone, I've restored it to factory settings but can't get past the activation screen. Can't I use the device with wifi without activating it? Or is this expensive device good for nothing since no one wants to use it as a phone. I'd like to use it as an alarm clock/media player but how do I do that? I called Verizon support and she told me it isn't possible but I'm not willing to give up that easily. Help please! Save this device from the landfill! TIA, L.

    Sure wish I was more patient. What I ended up doing was temporarily reactivating the phone since I knew it worked after I initially stopped using it. I downloaded the apps I wanted then I turned it off and reactivated my iphone. All appears to be well but I will file your instructions away for possible future reference. Thanks a bunch!
    Date: Sun, 10 Feb 2013 15:48:20 -0700
    From:
    To: >Personal email address deleted<
    Subject: Re: How do I use my deactivated Droid 2 as a media player? - Re: How do I use my deactivated Droid 2 as a media player?
                                                                                    Re: How do I use my deactivated Droid 2 as a media player?
        created by tikibar1 in DROID & DROID 2 by Motorola - View the full discussion
    See if this works to bypass the activation screen: On the Welcome screen with the 'touch the Android to begin' icon, tap each of the four corners of the screen, starting with the top left, i.e.:- Tap the top left corner of the screen, then- Tap the top right corner of the screen, then- Tap the bottom right corner of the screen (just above the grey bar), then- Tap the bottom left corner of the screen (just above the grey bar) Wait a few seconds and you should see the home screen
    Message was edited by: Verizon Moderator

  • How do I use my own photos for screensaver in Mountain Lion

    How do I use my own photos for screensaver in Mountain Lion.  I cannot see how to use my photos.  It seems that the screensaver is set with factory settings.  There appears to be no alternative.

    Check out 'More like this'    >>>>>>>>>>  (Next to your original post).
    There are several references to this problem ... and some ideas.   Always a good place to look.   Don't overlook the links within the posts.

  • How can I use 2 iPhone 4's on same iTunes account, but NOT sync same contacts?

    How can I use 2 iPhone 4's on same iTunes account, but NOT sync same contacts?

    They need to be registered under different Apple ID's.  The initial Apple ID is set when you first start the phone up.  If you've already registered the phone to the iTunes account, back it up to your computer, and then have iTunes do a factory reset.  Go to www.icloud.com, log in with your current Apple ID, select "Find My iPhone," choose the iPhone you want to dissociate from your primary Apple ID from the upper left, and then click the little circled X ("remove").
    When you start the phone, it will have you go through the setup process again, at which time you need to create a unique Apple ID for the device.  You can then restore it from your iTunes backup to get back your apps and other settings.
    Whenever you use the iTunes store, use the login information (Apple ID and password) that you were using before.  Basically, the second Apple ID that you created is purely used for accessing iCloud services, which includes synchronization of contacts, iCal events, and other such things.

  • My gf is one of those ppl with the horrible habbit of downloading anything and everything the internet tells her she needs how can i use FF to better protect her from the various virus she downloads on a regular basise

    as i write this i have just restored my gf's computer back to default factory setings and cleaned the HD she has a horrible habbit of downloading anything and everything something tells her to download it her most recent actions caused her to dl a virus along with a prog called "flv tube" ive never heard of it but in less then 5 mins on google i found it to be common with viruses how can i use FF to prevent and or stop her from downloading all this crap so im not always having to fix it for her

    Public Fox: https://addons.mozilla.org/firefox/addon/3911
    Be aware that an extension can easily be bypassed by starting Firefox in [[Safe mode]] or by using the portable Firefox version.

  • How can i use a second router to replace verizon fios router?

    Okay so just as the title says how do i use a second router? I got a cisco valet router... I don't know how to use it because the verizon router/modem is wierd i know how to use a router if i only had a modem but fios gives router/modem so how can i use my 2nd router? The current verizon fios router/modem is b/g mode and i wanna change to b/g/n so i can get a better speed from my internet... SO how can i use my 2nd router? I tried this http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506 but i don't get it can someone guide me better or make a video explaination on how to use a 2nd router? I have it connected with see as in pic i connect from my router Internet port to wan port and the ethernet lan port to the ethernet lan port on verizon fios and no work please help...

    OK, so with this, we have a few options. You appear to have a MoCa connection to the ONT, hence the coaxial cable being present.
    1: The ActionTec can be bridged to the Valet router. This will not require any additional cabling, however it will require a small amount of work to have working. You will also require the ActionTec still in the mix, even though it will not be acting as a router anymore with this configuration.
    Visit http://www.dslreports.com/faq/16077 and look at Option 4. There is a thread linked that will allow you to set up the ActionTec as just a MoCa bridge, and will pass the Public IP to your router. You will, in order for this to work once the ActionTec is bridged, need to connect the cable from your Valet router's Internet port, to the ActionTec's LAN port and nothing else goes to the ActionTec. From this point, your Valet should run as your primary and everything should connect through your Valet. If you are adding another router, a Netgear N300, you should perform the LAN to LAN setup, which we will talk about once you've got the Valet working correctly. LAN to LAN configs require a custom setup, so do not set up the Netgear for now.
    2: This is my preferred method, which would be to run an Ethernet cable to the ONT. Option 6 in the FAQ. This will require spaking to Verizon to have them move your ONT to Ethernet, but once they do this, you can disconnect the Coaxial Cable from your ActionTec router, and plug in your CAT5/CAT6 cable from the ONT to the ActionTec's Internet/WAN port. Use the ActionTec to ensure everything is working after the switchover, and once off the phone, log into the ActionTec, perform a DHCP Release, and then prompty power off the ActionTec. Once this is done, plug the CAT6 cable into your Valet router's Internet port. You should from this point, be able to connect to the Cisco, and if the DHCP Lease was broken successfully, the Cisco should begin serving up your Internet connection. If it does not, leave the Cisco powered off for a few hours to break the DHCP lease, and then power it up. If the Valet does not work, still, give the Valet a factory reset and set up this router again, with the Ethernet cable from the ONT connected to it.
    I would just take a good luck at the FAQ linked above again, and see what would work the best. Easiest thing to do is to get the ONT moved to Ethernet, which allows you to eliminate the ActionTec unless you need it in the future for TV service, and also allows you to use any router with ease.
    Once the Valet is up and running and holds your Public IP address from Verizon (use http://whatismyip.com/ to determine this) , and also serves up IPs to devices on your network, post back and we can help you set up the Netgear. If you have any issues while setting this up, fall back to the ActionTec. It's factory reset will work without configuration needed, regardless of you being on Coax or Ethernet.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • How can I use Iphone 4 as an mp3 player without a sim card until I get one?

    Hi,
    How can I use Iphone 4 as an mp3 player without a sim card until I get one? I just bought the phone and each time I try to switch it on to use the mp3 player, I cannot. It asks me to insert a sim card and I don't have a sim card yet. I was thinking I could use the mp3 player function of my phone until I buy a sim card.
    Thank you for your help in advance,

    Thank you, I understand, yeah, I knew that, my phone is factory unlocked and I am going home, which is obviously not in the States and I am thinking of buying a local carrier there. However, I still have 2 weeks before I leave and cannnot wait to start using my Iphone 4. I thought at least I could use the mp3 player function. So as far as I understand, I cannot activate it without a sim card. I have been using metropcs for about two years and it does not have a sim card. In this case, do I really not have another choice but wait for two weeks to listen to music? My Mp3 player just failed me and I really need to listen to music but on the other hand, while I can use my iphone as an mp3 player in two weeks, I don't want to spend more money on a new one. So, do you have another suggestion? For instance, can I use a friend's sim card to activate mine? Would this cause any trouble, when I go home and buy a local carrier? I think these questions might kinda sound weird to you, but first time with an Iphone, extremely excited to start using under my circumstances, I need help   thanks,

  • How can I use my Mac OS X for the next time

    Dear sir,
    Please, I need your help about Mac OS X and how can I use the OS for the next time I mean when I'm going to format my computer or to use for the another computer.
    By the way... I already installed the Mac OS X to my MacBook Pro so please I'm waiting for you advice.
    Mohammed Hussein

    Hi,
    He bought the iMac two years after mine.
    Would his Mac still be under warranty? It sounds like it is about only a year old and so may be still eligible for phone support, though that may depend on having nearby access to an Apple Tech support.
    He could get a replacement disk sent to him as well. The cost,  I don't know.
    Your disk would probably work, but you don't need to burn one; just use yours. If you are in two locations, then it would be better for Apple to mail him a replacement disk for his particular Mac.

  • I purchased a iphone i USA. How can i use this iphone in india with vodafone.

    I Purchased a iPhone 5s in USA. How can I use this phone in India with Vodafone.
    <Edited By Host>

    First, the iPhone would need to be unlocked. That would depend on where you bought it. Next, the North American phone would not work with all of the networks outside of the US. Also, the warranty for the device is only good in the US, so if you have a problem with the phone, you would need to bring it back to the US to an Apple Store. Where did you purchase the phone?

Maybe you are looking for