How do I use my internet via airport and my printers in windowsXP.

Boot Camp works well but Now in widows I can not connect to the internet using my already established wireless internet. My printers are set up via airport as well and I can't get that to work. The windows recognizes there is a signal to use and it shows the signal is excellent but I cannot conect to it???
Please email me some answers.
iMac Intel Core Duo Mac OS X (10.4.6)

Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
iFelix

Similar Messages

Internet via airport and other computer via ethernet and hub

Is this possible?
Network 1:
I have a macbookpro. I connect to the 'net via airport and a wireless router-modem. I use dhcp with manual address (192.168.1.5, because we have numerous computers here). All's sweet.
Network 2:
I need to work on a linux box which doesn't have wireless. It's a pain to connect it to the wireless router directly (although this does work), so I have an ethernet cable and hub and cable to connect it to the mbp directly. I configure ipv4 manually and can telnet etc to the linux box (which has its own ipaddress specified already) IF the airport is disconnected.
But I want to run both at the same time. I know I can work on the linux box and surf at the same time IF I connect the linux box to the router (by ethernet cable). But what if I want to have the wireless and ethernet on my mbp together?
Do I need to specify different ip addresses on my mbp for the ethernet and wireless? I've set it both ways and it doesn't seem to work with them either the same or different. If I go to Network Port Configurations (in Network) and move "Airport" to the top, I can surf but not telnet to the linux box. If I have Ethernet higher in the list, I can telnet but not surf. This is the case whether the ip addresses are the same or different.
Is it possible to do what I want, or just not possible?
No I don't have a crossover cable.

Realised that I needed two networks with different ids.

Internet via airport AND ethernet dropping?

I have a new uMBP 13". When I connect to my home network it is the only computer on the network that will drop it's signal every 10 minutes at least. It searches for the network and reconnects a few seconds later but I have to manually search for the network and select.
I tried it with just the ethernet cable and airport turned off and the same thing happens.
I have an iMac connected wirelessly to the Netgear G router also running snow leopard which works fine.
I know there are discussions about airport dropping but this is airport and ethernet so where do I start with solving the problem?
Thanks

Hello William.
I've had similar problems, as described above. I have called AppleCare; I have found other threads on the forum(s) dealing with AirPort dropping connections; I have found much discussion of the subject on the web. There is a problem, and there appears to be no solution. Here is my related situation.
I have a MacBook Pro with Snow Leopard; an oldish Netgear wireless router; and my wife is connected to this little LAN with my old iBook running Leopard. That machine, with Leopard, never loses a connection whereas my Macbook Pro with SL loses the Airport connection approximately every 24 hours. After talking with the ISP and Netgear I solved that problem initially by rebooting the router. Now, I find, I have only to turn AirPort off and then on again and the connection is reestablished.
Meanwhile, I tried switching over to ethernet. I turned Airport off, and ethernet on, with an automatically assigned DNS address. Again, to my amazement, the connection (with the internet) was dropped, again, about every 24 hours--long about 9:30 in the evening, for me. To reconnect ethernet to the web I only had to click "renew DHCP address" under the Advance tab in the network panel. I.e., the behavior was analogous to what I went thru with Airport.
I have to think that 1) since this doesn't happen to my wife's machine on the same network running Leopard, and since 2) the same thing happens whether I'm using AirPort or Ethernet to connect to the web, that this is something systemic in SL's networking innards.
I went over all of the router's connections and settings (no timing out issue), and I upgraded its firmware successfully. I've done all the usual troubleshooting gimmicks, and, of course, I've discussed this with AppleCare. They haven't the foggiest. Since the problem only recurs in a longish circadian cycle it's not something that can be dealt with over the phone.
I have to believe there's something wrong with the networking software in Snow Leopard. And, for what it's worth, if you do a search for this on Google there is a great deal of similar discussion.
Now my solution is simply to use Airport and to turn the program on and off via the menu bar. Unfortunately it raises cain with syncing--"Mingler" and iCal and iCal's system syncing software run away with the CPU. But that's another thread!
All the best,
Alarik

Printer used to work via airport and now it doesn't

Hi there -
I have an imac and a macbook on 10.4.11. Recently I had to upgrade my AT&T modem because they said it was outdated. After installation of the modem, I can no longer get my HP 3310 to print.
I've tried re-setting up the printer via its Wireless Setup Wizard. I then tried to get the imac to recognize it but it will not. I then went on line and after uninstalling the old HP driver, installed
a new one and that didn't work either. On the macbook where no prefs were changed, the HP 3310 shows up in the printer window but when I try to print it just chugs away and eventually says, "printer stopped".
I've trashed the HP prefs in the library and restarted the imac to no avail as well. Does anyone
know what would cause this to happen once a new modem is installed? I'm assuming it's modem related but have no idea how to fix it. In addition, AT&T says since it's not the printer and airport are not their equipment, they can't help me.
ANY ideas would be greatly appreciated. Thanks!

Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html
Then try to set up an IP printer in Printer Setup Utility, there should be an hp IP printing choice.

Trouble connecting to internet via airport

i can't connect to the internet via airport. Does anyone know what the problem may be?

There are several items that may be behind this issue.
So troubleshooting them by trial and error is most likely
a way to attempt to resolve the cause, especially with
an older OS X and hardware, while trying to connect to
a newer base station and different newer frequency...
•Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
The above covers several areas of settings and ideas.
If the computer has been online, and now does not work
wirelessly, that may be a matter of an accidental change
in settings; or something turned off that used to be on.
A general overview, w/ examples of settings similar to the above, for 10.3.9/10.4.11 appears here: http://www.tr.txstate.edu/get-connected/computerservices/wireless/encrypted/maco sx-wpa2.html
Is you computer running OS X 10.3.9 Panther? If so,
your built-in AirPort card may be an 802.11b version
and the security protocol would not work with a newer
or modern wi-fi base station (WEP, WPA) unless those
settings were changed. You can turn off security if the
computer is too old to be able to connect with the old
settings for that protocol. Also, a later wireless base
station may not see an old wi-fi card using 802.11/b.
So it is a matter of knowing what you have on either side
of the connection issue; the base station and the wi-fi
card have to use the same frequency and security. Or
there are work-arounds to attempt to correct this matter.
Hopefully you can connect and use the wi-fi internet.
Good luck & happy computing!

24" imac 2.4 says connected to internet via airport--but does not

I just got a new 2.4ghz 24" aluminum imac. There are three other macs in my house, all of which connect to our wireless network and are able to browse the internet. This new computer can connect to the network, yet it always has one of two problems: either it says it is connected to the network, but can't access the internet, or it says it is connected to the internet via airport, but when you open your web browser, no such luck. Many times when I open the network preference panel, there is no router number assigned. Sometimes there is. I can connect to other networks in the neighborhood that don't require a password just fine (how I'm writing this). Why can this new machine not connect, when all three of the other macs in the house have no problem?
anyone, please help. this is frustrating.
thanks,
keegan

OK but, like you, my other machines (PowerPC iMac and Power Book) did seem to work OK while the new iMac was playing-up. It was only when I noticed that the Old iMac had not downloaded some podcasts that I started to look at the router. I now remember having a similar problem a few years ago - frequent failure to automatically log-in to the router, occasional failure of manual log-ins and slow/unreliable connection once logged-in. A new router fixed the problem. It's a real pain but there you are. Must remember to keep receipt of current router and kick-up a fuss if it fails within the guarantee period.
Sorry if this doesn't help but I thought it worthwhile posting my experience over the last 2 days.
Have you tried connecting to your router by ethernet?
I'll let you know if the problem returns but all is sweetness and light at present.

Network prefs: "connected to internet via airport"... but can't go online??

I've got steady green lights on my airport express and modem/router; and in Network Preferences it says that I am connected to the internet via Airport (green light here too). BUT, I can't get online with any of my browsers or my mail client. What's going on here? Help appreciated.
Thanks
eMac 1GHz, iBook 14" 1.33GHz Mac OS X (10.4.8)

If you have a Modem Router combined and an Airport Express
The Express must be set up to NOT DISTRIBUTE IP's.
You do not mention what brand Modem or Router or Modem /Router combined. Your network confiquration can very a little depending on what you are using.
If you are using all Apple Airport products the confiquration is pretty straight forward.
If you are using 3rd party products then the set up can be a little different.
From what you say in your post you are using 2 routers, my quess is the Express is set up to distribute IP's and if your other router is set up this way then thats your problem.
Don

How can I use the Internet on my Iphone?Apple says they send an e-mail, but to Whom? I didn't receive an e-mail

How can I use the Internet on MY I phone?

Don't understand.
Tap the Safari icon. You will be on the internet.
The iphone is designed to always have access to the internet.
What exactly is your issue?

How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac

How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac?
The question pretty much says it all.
I have a Mac Mini with an attached 3TB Hard Drive used for Time Machine Backups.
I have an Airport Extreme base station which services that machine plus several others.
I would like to backup my new iMac and a MacBook Pro to the Mac Mini.
What do I need to do on the mini to export that hard drive so that it can be used as a Time Machine target from the other systems?
All systems are running 10.6.8.

Well you would have to do backups over a network which is much slower and has highest chance of becoming corrupt. I think your best option would be to get an apple time capsule to act as a network and back if thats how you wanna do that

Can't connect to Internet via Airport but CAN via Ethernet

Yeah so I have tried TWO different of my AX's and can not connect to the internet via EITHER even though Network Status says "you are connected to the internet via Airport". But, if I hook the ethernet cable directly to the computer from the modem it connects to the internet fine. What am I missing. Oh yeah, and on one of the AX's the "music" tab does not appear next to the "WDS" tab thus not allowing AirTunes on that AX, any ideas on that too? PLEASE HELP!!

CONNECTED!! After resetting the modem, llike you suggested, I am able to get the wireless network back up and running, BUT...I am still having problems with one base station not showing the "music" tab and thus not letting me stream music to it. When I hit "configure" the tab shows for a quick second then disappears. Any idea?

Use PC internet via USB cable on n97mini

How can I use PC internet on my s60v5 device, this was possible on s60v2 by using custom COM ports and a software. Is it possible to achieve this on s60v5?

Ok.. Reverse tethering over USB .
May want to check your Windows sharing options/settings and the network adaptors settings
Also make sure all the drivers are properly installed and USB debugging in turned on.
The issue is Windows related. Maybe this VIDEO will help .
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Connecting a powerbook G3 to the internet via ethernet and a DSL modem. Does the G3 have the ability to do this?

I am trying to connect an older powerbook G3 (M4753) to the internet via ethernet and a DSL modem. Does the G3 have the ability to do this? I'm having alot of trouble. G3 Dialog box states the DHCP server will populate IP address, etc. It does not. The G3 also insists I enter the DHCP client ID.

Anything useful in the following articles?
http://support.apple.com/kb/TA20782
http://support.apple.com/kb/TA20785
Jan

Time Capsule connected to internet via ethernet and static IP address

Hi! I'm at my wits end and getting no help from my IT department. I want to use my Time Capsule to create a wireless network within my office. I can directly connect my TC to the internet via ethernet and an assigned static IP address. However, doing so I'm unable to connect to the internet using the created wireless network on my laptop. I've tried using the bridge option for sharing as well as the "sharing an IP address" and neither configuration is working. any thoughts?

I have the same setup; my ISP uses static IP only. No probs configuring a LinkSys router but with TC it's not obvious where to plug in the info. Can't ping the TC router via IP address to setup directly like the LinkSys which would be simple. Is the out of box router address really 10.0.1.1 on the LAN side? I want to use the 192.168 sequence and have changed it but still no success as I can't determine where to put the static IP! Can you give me something specific? By the way, it works fine thru the LinkSys router in Bridge mode.
Thanks,

HT204053 How do I use the same Apple ID and different Cloud for other devises

Hi
How do I use the sane Apple ID and different Icloud for other devises

http://support.apple.com/kb/HT4627

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

How do I use my internet via airport and my printers in windowsXP.

Similar Messages

Maybe you are looking for