How do I use my iPhone as a remote for my apple tv

I am trying to use my iPhone or iPad as a remote for my Apple TV, but on my TV screen the "add remote" option is grey and cannot be selected. Any suggestions? Thanks, Cliff

Welcome to the Apple Community.
If you have already turned on home sharing on the Apple TV, then the Apple TV should simply show up in the remote app without you having to do anything else.
Unfortunately, if you haven't yet enabled home sharing, you can only do so with the original remote and you'll need to purchase a replacement from the Apple Store.

Similar Messages

  • How do I use my iphone as a remote for apple tv

    I have an apple TV and I lost the remote. How do I set up the Iphone app to work as my remote?

    Welcome to the Apple Community.
    If you have already turned on home sharing on the Apple TV, then the Apple TV should simply show up in the remote app without you having to do anything else.
    Unfortunately, if you haven't yet enabled home sharing, you can only do so with the original remote and you'll need to purchase a replacement from the Apple Store.

  • How can I use my Iphone as a remote control?

    How can I use my Iphone 6 as a remote control?

    If you are referring to an Apple TV or iTunes remote control then download the "Remote" app from the app store.
    If you are referring to a remote control for your TV, Cable box, DVD Player etc then you cannot use your iPhone as a remote for these things unless they are wifi connected and have a remote control app on the app store.

  • How can I use a iPhone as a remote intervalometer/web camera?

    Hey everyone.. got a question to throw out there and hopefully greater minds than mine will come up with an answer!
    I'm part of a model aircraft flying club and our airstrips/fields are quite isolated and remote... we have no mains electric power or telephone land-lines. What i'm after is a solution to getting a series of still images (snap-shots) of the clubs airfield on to the clubs website... remotely. I know there are a few apps out there that will allow a iPhone to be used as a remote camera, and you then log into a website to view the images, but all seem to fall short on some specific critera I require. Like I said, the clubs club-house (shipping container) as no power, so the phone will have to be eventually powered from a larger battery source... like a mobile-home leisure battery, and then conected to the internet using either a data-only sim card in the phone or using a mifi... that bit is sorted! What is the problem I so need help with is; I need to set the iPhone to shoot stills only, say at a rate of 1 image every 15 mins and then upload them to a web server/website, also only to take the pics between set times of the day... afterall it's pointless taking pics in the dark, and also that'll use up data. I've had a look at apps such as 'Manything' and 'Presence' and also done a trawl on the web to see if a solution is available, but i've drawn a blank so far.
    Any body able to help?

    If you are referring to an Apple TV or iTunes remote control then download the "Remote" app from the app store.
    If you are referring to a remote control for your TV, Cable box, DVD Player etc then you cannot use your iPhone as a remote for these things unless they are wifi connected and have a remote control app on the app store.

  • Hi, i want to use my iphone as a remote for my itunes i have downloaded the app, turned on home shareing on my laptop and they dont seem to be talking.

    hi,
    i have dowloaded the app "remote" to use my iphone as a remote for my itunes library, i have turned on home shareing on my laptop. they dont seem to be talking to each other. i have also tried the other way of adding a library on my iphone, but my laptop wont show my phone on the devices list.
    anyhelp would be apreciated

    Turn off home sharing, you don't need that. Open Itunes Preferences from the computer. Go to the devices section. At the bottom you will see the option to add a remote access that and follow the steps.

  • How do I use my iPhone as a remote iTunes PLAYER?

    Hi,
    I am trying to set up my iPhone such that I can plug it into my sound system, and sit on my couch with my laptop and transmit whatever I'm selecting on the iTunes library on my laptop directly to my iPhone.
    Most of my web search results yield solutions for using the iPhone as the controller (remote), but I want my laptop to be the control. Basically the iPhone acts like a receiver. I did find one app that provides this, Airfoil, but the full price is $25!!! I was baffled. I know iTunes now offers free WIFI streaming built-in, so I am surprised that only a slight modification of this is so hard to find.
    I hope I've explained myself clearly. If anyone has any apps that do this please let me know! Most of the time, Remote or the Built-in sharing properties of the latest iTunes version are sufficient, but sometimes I want to be on my comp and have my iPhone be the receiver that I can plug into my sound system.
    Thanks

    Well I am trying to avoid buying something that expensive, refurbished or not. And I don't want the iPhone to be the remote. I guess based on the solution you suggested, I want my iPhone to act like the Airport Express but only for audio transmitting, no video or photos or anything. I thought maybe there was even a Bluetooth method that could solve this, but I am finding that pairing my iPhone 4S with my MBP is not possible. Unless the problem has been solved?
    Any other solutions?

  • How can I use my Iphone 3 (or 4) for soil sampling with my Wintec G-Rays 2 GPS reciever?

    Hello, everyone. 
    I work for a company in Michigan that does a lot of soil-sampling.  (We take core samples from precisely mapped areas of fields for scientific anaylsis.)
    My goal is to use my Iphone 3 with my existing bluetooth Wintec G-Rays 2 for precise GPS mapping in apps like GISroam.  The searchable apps in the App Store appear unreliable for tethering. 
    Also:  My boss has an Iphone 4.  (Perhaps that phone be more appropriate for this application?)
    Question:  Am I thinking about doing this in the right way?  Are there apps that will make this simpler? 
    Specs for the G-Rays 2 are found below.
    http://www.wintec.com.tw/en/Products/gps/wbt_202.html

    If your phone is locked to AT&T in the USA, then only AT&T in the USA can unlock it - you will need to contact them about it.
    The requirements for AT&T to unlock it are here - http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=wyYI6i46IlD
    Note that requesting and processing an unlock throught AT&T is the ONLY way to officially and permanently unlock your phone.

  • Can i use my iphone as a remote for the iPad

    is there an APP that will allow me to use my iphone to control my ipad2?

    You can use your IOS device to do initial setup on an Apple TV, but you won't be able to use it as a remote as that also requires home sharing to be enabled. I would take it to Apple to test the remote and/or get a replacement.

  • HT1414 how can i use my iphone 4s in Thailand for 1 month

    i will be away in Thailand for about 1 month i just called Sprint to unlocked my iphone 4s ... what will be my next step so i can use my phone over in Thailand

    You can get a pre-paid SIM from DTAC, AIS, or True - once you're in Thailand.

  • How can I use my iphone as modem for my mac?

    How Can I use my iphone 4 as modem for my mac-pro in areas where there is not Wi-Fi

    If your cell phone carrier supports tethering with the iPhone, you need to sign up for a tethering plan with your carrier first.
    http://support.apple.com/kb/HT3574

  • How can I use my iPhone 3GS for a personal wifi hotspot for my laptop

    How can I use my iPhone as a hotspot for my laptop

    See Here
    using Personal Hotspot
    http://support.apple.com/kb/HT3574

  • How do I use my iphone 4S wifi on my laptop via USB cable

    Hi with my HTC when I connected it to my laptop via USB cable a list of options came up on my phones screen and one of them was to tethering. But when I do the same with my iPhone no options come up on my screen, so how do I use my iPhones wifi on on my laptop useing a USB cable?
    Any help would be gratefully appreciated.
    My laptop runs on windows vista and my iPhone 4s has the latest updates.

    I want to use my home wifi signal to tether my iPhone to my laptop via USB ,as my laptops wifi card is broken. It worked ok with my old HTC desire as when I can extend it to my laptop it had a list os options of what you wanted to do and one of them was tethering, as I'm useing my home wifi I don't need to worry about my data usage. But thank you for responding.

  • How do I use my iPhone 5 as a router for my iPad?

    How do I use my iPhone 5 as a router for my iPad?

    Yep, as stedman has helpfully proffered a link on HowTo.
    Once the personal hotspot is up, you can connect a reasonable number of devices to gain Internet access. The iPad can hook up either via Wi-Fi or Bluetooth. If you have a computer, you also have the choice of a wired connection as well.

  • How do i use an iphone 5 as an ipod

    how do i use an iphone 5 as an ipod

    Lawrence, any idea why this article now has the designation of being "archived" and "no longer updated by Apple"? Is it because there's nothing left to add or update at this point or because it's no longer required to swap SIM cards? (I don't know if that's true just trying to figure it out.)
    I didn't take out my wife's original SIM card in turning her iPhone 4s into an iPod Touch for my son and almost everything has gone smoothly except for two things:
    Facetime had a few issues at first but I've straightned them out.
    I still see "activation" error messages after restarting. This I'd like to get ironed out because it's annoying, so is the best course of action still to take out the old SIM, put in the SIM from my wife's new iPhone, restore the old one with new SIM in it, and then once everything is set up correctly return the new sim to the new phone?
    I think if I understood more clearly why this SIM swapping is necessary, I would be able to answer some of my own questions.

  • How do I use an IPhone 4S (I purchased in Tokyo ) in Mumbai! It's locked

    How do I use an IPhone 4S (I purchased in Tokyo ) in Mumbai! It's locked. The carrier there was SoftBank and I have cleared all my dues with them. They refused to unlock it at the time of termination of contract. Now I'm in dire straits .......do not want to spend o buying another one when there are already two lying at home. Please help

    Sell the devices you currently have to someone that can use them with the carrier they are locked to.  Put those funds towards the purchase of a device that you can utilize with the carrier of your choice.

Maybe you are looking for

  • Non-XML payload in graphical mapping

    Experts, I have a scenario where I need to trigger a graphical map which eventually populates an IDoc (custom) structure but the Idoc is not being populated with any of the source field. My source data is a flat file. 1. I dont want the src file cont

  • Horizontal line in Smartforms

    Hi All, I need to split the one of the window with horizontal line and one portion need to fill with back ground color(Red). Is it possible to do this? Thanks, Subbu.

  • V/30: Include NAME1 in Document Title for Order Confirmation per Email

    We have configured a sales order output condition for forwarding order confirmation per email. Within the document title (Mail Title & Texts) there is reference to e.g.  &VBAK-VBELN& etc. Is it possible to add NAME1 within the title?

  • Question about Unicode and migration 32 -- 64 bit

    Hello We are using ECC 5.0 on Windows 32-bit and SQL Server 2000. We want to migrate to platform Windows 64 bit. We know the procedure described on note 960769-Windows:Migration from 32-bit to 64-bit. We know we can use R3load to do export/import, an

  • How to Hide trailer section?

    Hi friends, I supose it's easy but I can't remember: do you know how to hide the trailer section (not only hide, I want not to show the empy page) depending on a parameter value. I mean: I have a user parameter in the report (P_myparam) If P_myparam=