How do I use my iSight camera through msn messanger rather than iChat?

Hi
MSN for mac any version does not do video.
aMSN and Mercury do video but no audio.
if you are trying to video with a PC you will be better off using Skype
Mac version http://www.skype.com/download/skype/macosx/index.html
PC version http://www.skype.com/download/skype/windows/helloagain.html
Tony

Similar Messages

How do I use my isight camera live?

I have a 27 inch Imac. How do I use my Isight camera as a web cam? I have flashplayer 10, but it still won't work. Help?

Software always operates webcams, so you need to find software applications that does what you want.
Use your Mac's  > App Store... menu command to search for "webcam"
(without quotation marks).
You can also search for other terms like "video chat", "video conferencing", "video surveillance", etc.
If you need other functions, some of the older apps in the list in this link are also still available:
http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
BTW, Flash 10 is out of date for OS X 10.7.2.
• You can find the latest Flash version that works with you system using this page:
      http://www.adobe.com/software/flash/about/
If you update, use your Mac's Disk Utility to repair permissions. Then follow Adobe's instructions here: http://kb2.adobe.com/cps/908/cpsid_90893.html
Be sure to uninstall your current Flash player before installing the new one.
Repair permissions again immediately following installation of the updated Flash player.
• Be aware that the current Flash Player Preferences can be configured in your Lion Mac's  > System Preferences...    These settings may be blocking Flash on a system-wide basis.
• Individual Flash settings are still configured in the same way as older versions:
      http://tinyurl.com/5kjv3
Message was edited by: EZ Jim

How can one use the physical memory of our system rather than virtual memory while running Labview?

We have a Windows NT system with 2 Gb of physical memory and would like to utilize the RAM fully using Labview. What usually occurs is that Labview uses a tremendous amount of page file space while a majority of the physical memory is unused. Is there a way to configure Labview (or our system) to overcome this problem? It seems that our processes would be much faster if they were mainly using the physical memory. Is it possible to trick the system, by creating a RAM disk and allocating this as virtual memory space?

> We have a Windows NT system with 2 Gb of physical memory and would
> like to utilize the RAM fully using Labview. What usually occurs is
> that Labview uses a tremendous amount of page file space while a
> majority of the physical memory is unused. Is there a way to
> configure Labview (or our system) to overcome this problem? It seems
> that our processes would be much faster if they were mainly using the
> physical memory. Is it possible to trick the system, by creating a
> RAM disk and allocating this as virtual memory space?
LabVIEW the application doesn't know anything about physical versus
virtual memory. LV asks the OS for general purpose memory and goes
from there.
Drivers like DAQ and IMAQ will have a combination of general user
memory and page lo
cked physical buffers.
I'm not up on the details, but this is something that the OS is in
control of, so that is where you need to look for the solution. One
of the things to look at is the disk cache. By default, I think that
NT takes a percentage of the RAM to use for disk cache. With that
much RAM, this is probably unnecessary and is using too much.
Similarly, the OS may be attempting to keep the working set size
to a fraction of the total RAM to reserve space for other things.
It doesn't make sense to me, but then I don't work for MS.
Greg McKaskle

How do I use the web cam on my pc? Hp w2007 I have windows vista

How do I use the web cam on my pc? Hp w2007 I have windows vista

Hp w2007 is a HP monitor without webcam ...
Where is the webcam?
V.
*** Say 'Thanks' with Kudos ***

How do I activate my Isight camera to take an image of my gift card?

How do I activate my Isight Camera to take an image of my Gift card so I can redeem it?
The camera sees the card OK, but I don't know how to make it take an image.
Please help.
Greg.

I don't think that you can do it with older MacBook's which have iSight cameras on them, the redeem by camera lists requirements as :
Mac with a FaceTime camera (an Apple Display with FaceTime works too)
I think that you will need to manually enter the card's code

Use external isight camera instead of built-in isight

Is it possible to have an external isight camera be default instead of the built-in camera at the top of the monitor? I'd like to use the external camera, which is more portable than the monitor, with such programs as Skype, but -(on Skype at least) I'm not given the option to choose anything except the built-in iSight cam. Can the external iSight be the default cam?
Thanks.
Lee

Not to sure if an external webcam (iSight) can be the "default" webcam. Usually, the video app gives you choices of which webcam to use.

HT2090 hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to r

hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to reboot.
Is there a way to use activity monitor to identify and kill the process controlling the isight? My apologies in advance if this sounds windows (task manager) like.
Thanks

tqtclipper wrote:
hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera...
http://support.apple.
com/kb/HT2411: Your camera can be used by only one application at a time.
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
tqtclipper wrote:
... Is there a way to use activity monitor to identify and kill the process controlling the isight? ...
http://support.apple.
com/kb/PH5147: You can quit any process you can see in those listed in the window that opens when you use Activity Mornitor's
Window >
Activity Monitor
menu command.
Message was edited by: EZ Jim
Mac OSX 10.8.3

Compatability with adobe Reader 9.3; use of isight camera with skype

I cannot open pdf documents with A. Reader - get the message that it is not supported by this unit. How does one get the isight camera to be active when I log on to Skype?

Hi, you have 2 ?'s
(1) In Skype go to Preferences & check out your Video settings..
(2) PDF auto opens in Preview - if you want have Adobe Reader you will need to d/load from Adobe, then you will need to Right Click on the file & amend Open With or make A/Reader your default..L

How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

Did you check the help page for Correct Camera Distortion and Process multiple file
Correct Camera Distortion: http://helpx.adobe.com/photoshop-elements/using/retouching-correcting.html#main-pars_headi ng_5
Process multiple files: http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f89cffc612e28adab65-7 fff.html#WS287f927bd30d4b1f89cffc612e28adab65-7ff6

Isight cam for MSN and AIM users (on Windows)

I'm having trouble set my isight for Windows users. My friend was using Trillion. Will that work or should she be using AIM proper.
I also downloaded MSN messenger for Mac, and I'd like to use the isight cam to talk to people on that. How do I go about setting that up? I hear it's kinda hairy.
Chris

Hi Christow!
You mention that you are having problems connecting to your windows friends. I assume you are able to connect with mac users with no problem. Here's is a nice overview to have your windows friends review so you can connect with them: http://www.mvldesign.com/videoconferencetutorial.html
As far as MSN for the mac, it doesn't support video at this time, you may want to consider using aMSN which can be found at: http://amsn.sourceforge.net/

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

HT4059 How do I make ibook purchase with iTunes gift card rather than credit card on account.

How do I make ibook purchase with iTunes gift card rather than credit card on account.

go to settings- itunes app store- click appleid and view account - may need password - then under billing info select none. however it will auto use the gift card regardless first

Forcing traffic through load balancer rather than zone to zone

I have several T5140s with 2 LDOMs. Within each LDOM I have multiple zones which contain 2 environments. Each environment comprises the following, an apache instance behind a BigIP load balancer, a JBoss instance, and several misc. The jboss zone has three IP address assigned for multiple applications. Each server is configured identically as far as zone and LDOM layout. We use mod_cluster to cluster our apache and Jboss environment. What I'm trying to accomplish is forcing the apache zone's traffic through the BigIP rather than zone to zone.
Referring to the information below, server2ldom1jboss is one jboss node which needs to connect to both server2ldom1japache and server1ldom1apache. server2ldom1jboss connects to server2ldom1apache via its DNS name which is a NAT address. So webserver2 resolves to 10.10.2.5 which NATs to 10.10.1.5 behind the BigIP. webserver2 responds directly to the jboss zone rather than through the BigIP. Not good. server1ldom1apache works correctly as it's not a local zone.
Referring to this document, https://blogs.oracle.com/solarium/resource/solaris-container-guide-en-v3.1.pdf
section 5.2.7.8
"Connection of zones via external routers using the shared IP instance"
I've created the following routes
route add 10.10.2.5 10.10.1.5
route add 10.10.0.34 10.10.1.5 -interface -reject
route add 10.10.0.35 10.10.1.5 -interface -reject
route add 10.10.0.87 10.10.1.5 -interface -reject
route add 10.10.1.5 10.10.0.87 -interface -reject
route add 10.10.1.5 10.10.0.34 -interface -reject
route add 10.10.1.5 10.10.0.35 -interface -reject
This does prevent the zone to zone traffic, but it also preventing any response. I've tried other options as well, but have not been successful yet. What concerns me is this "These interfaces must not be used elsewhere in the global zone." The 5140 has 4 ethernet ports, which are configured into two port channels. vnet0 and vnet1. The apache instances use vnet1. The remaining zones use vnet0, including the global zone (server2ldom1 10.10.0.21). I think this may be the issue, but do not see an easy resolution without breaking my port channels and losing redundancy and fail-over.
If there is anything I'm missing or a better/different way to do this, I would greatly appreciate any input on this matter.
Thank you.
webserver2 10.10.2.5 NATs to 10.10.1.5
jboss apps 10.10.0.34, 10.10.0.35, 10.10.0.87
10.10.0.0/24 is the lan
10.10.1.0/24 is the network behind the BigIP
10.10.2.0/24 is the webserver network (in front of the BigIP)
[1658]root@server2:~# ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 4 2G 1.1% 138d 5h
MAC
00:14:4f:ec:20:ff
HOSTID
0x84ec20b8
VCPU
VID PID UTIL STRAND
0 0 2.0% 100%
1 1 1.4% 100%
2 2 0.7% 100%
3 3 2.1% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3, 4, 5, 6, 7)
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
VARIABLES
boot-device=/pci@0/pci@0/pci@2/scsi@0/disk@0,0:a disk net
keyboard-layout=US-English
nvramrc=devalias rootdisk /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a devalias rootmirror /pci@0/pci@0/pci@2/scsi@0/disk@1,0:a
security-mode=none
security-password=
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
pci@0 pci
niu@80 niu
VCC
NAME PORT-RANGE
primary-vcc0 5000-5010
CLIENT PORT
group1@primary-vcc0 5000
group1@primary-vcc0 5000
VSW
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID PVID VID MODE
primary-vsw0 00:14:4f:f9:ff:ff aggr1 switch@0 1 1
PEER MAC PVID VID
vnet0@ldom2 00:14:4f:fb:7b:ff 1
vnet0@ldom1 00:14:4f:fb:1a:ff 1
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID PVID VID MODE
primary-vsw1 00:14:4f:fb:8e:ff aggr2 switch@1 1 1
PEER MAC PVID VID
vnet1@ldom1 00:14:4f:f8:17:ff 1
vnet1@ldom2 00:14:4f:f8:c2:ff 1
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 ldom2_swap /ldoms/swap/server2ldom2
ldom2_root /dev/dsk/c4t600601601CE1210018F9E37BD2AADD11d0s2
ldom1_swap /ldoms/swap/server2ldom1
ldom1_root /dev/dsk/c4t600601601CE121007E02166CD2AADD11d0s2
CLIENT VOLUME
ldom2_swap@ldom2 ldom2_swap
ldom2_root@ldom2 ldom2_root
ldom1_swap@ldom1 ldom1_swap
ldom1_root@ldom1 ldom1_root
VCONS
NAME SERVICE PORT
SP
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldom1 active -n---- 5000 30 15G 3.7% 192d 6h
MAC
00:14:4f:f8:a5:ff
HOSTID
0x84f8a5f5
VCPU
VID PID UTIL STRAND
0 4 0.4% 100%
1 5 0.3% 100%
2 6 0.1% 100%
3 7 4.4% 100%
4 8 0.2% 100%
5 9 0.2% 100%
6 10 14% 100%
7 11 0.1% 100%
8 12 8.1% 100%
9 13 0.1% 100%
10 14 0.1% 100%
11 15 0.1% 100%
12 16 0.3% 100%
13 17 0.1% 100%
14 18 0.1% 100%
15 19 0.1% 100%
16 20 0.3% 100%
17 21 0.6% 100%
18 22 0.3% 100%
19 23 0.1% 100%
20 54 1.0% 100%
21 55 0.5% 100%
22 56 1.2% 100%
23 57 0.2% 100%
24 58 4.5% 100%
25 59 0.9% 100%
26 60 0.0% 100%
27 61 0.1% 100%
28 62 0.1% 100%
29 63 0.3% 100%
MAU
ID CPUSET
1 (8, 9, 10, 11, 12, 13, 14, 15)
2 (16, 17, 18, 19, 20, 21, 22, 23)
6 (48, 49, 50, 51, 52, 53, 54, 55)
7 (56, 57, 58, 59, 60, 61, 62, 63)
MEMORY
RA PA SIZE
0x8000000 0x88000000 10G
0x401800000 0x6b1800000 5G
VARIABLES
auto-boot?=true
boot-device=ldom1_root:b
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID
vnet0 primary-vsw0@primary network@0 00:14:4f:fb:1a:ff 1
PEER MAC MODE PVID VID
primary-vsw0@primary 00:14:4f:f9:ff:ff 1
vnet0@ldom2 00:14:4f:fb:7b:ff 1
NAME SERVICE DEVICE MAC MODE PVID VID
vnet1 primary-vsw1@primary network@1 00:14:4f:f8:17:ff 1
PEER MAC MODE PVID VID
primary-vsw1@primary 00:14:4f:fb:8e:ff 1
vnet1@ldom2 00:14:4f:f8:c2:ff 1
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
ldom1_swap ldom1_swap@primary-vds0 disk@0 primary
ldom1_root ldom1_root@primary-vds0 disk@1 primary
VCONS
NAME SERVICE PORT
group1 primary-vcc0@primary 5000
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldom2 active -n---- 5000 30 15000M 0.8% 192d 6h
MAC
00:14:4f:fa:e8:ff
HOSTID
0x84fae839
VCPU
VID PID UTIL STRAND
0 24 1.0% 100%
1 25 1.0% 100%
2 26 0.0% 100%
3 27 0.0% 100%
4 28 0.1% 100%
5 29 0.3% 100%
6 30 0.0% 100%
7 31 0.0% 100%
8 32 0.0% 100%
9 33 0.1% 100%
10 34 1.3% 100%
11 35 0.0% 100%
12 36 0.1% 100%
13 37 1.0% 100%
14 38 1.9% 100%
15 39 0.0% 100%
16 40 0.0% 100%
17 41 0.0% 100%
18 42 0.1% 100%
19 43 0.5% 100%
20 44 0.2% 100%
21 45 0.0% 100%
22 46 0.2% 100%
23 47 0.4% 100%
24 48 0.2% 100%
25 49 0.0% 100%
26 50 0.0% 100%
27 51 0.0% 100%
28 52 0.0% 100%
29 53 0.0% 100%
MAU
ID CPUSET
3 (24, 25, 26, 27, 28, 29, 30, 31)
4 (32, 33, 34, 35, 36, 37, 38, 39)
5 (40, 41, 42, 43, 44, 45, 46, 47)
MEMORY
RA PA SIZE
0x8000000 0x308000000 15000M
VARIABLES
auto-boot?=true
boot-device=/virtual-devices@100/channel-devices@200/disk@1:b ldom2_root
keyboard-layout=US-English
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID
vnet0 primary-vsw0@primary network@0 00:14:4f:fb:7b:ff 1
PEER MAC MODE PVID VID
primary-vsw0@primary 00:14:4f:f9:ff:ff 1
vnet0@ldom1 00:14:4f:fb:1a:ff 1
NAME SERVICE DEVICE MAC MODE PVID VID
vnet1 primary-vsw1@primary network@1 00:14:4f:f8:c2:ff 1
PEER MAC MODE PVID VID
primary-vsw1@primary 00:14:4f:fb:8e:ff 1
vnet1@ldom1 00:14:4f:f8:17:ff 1
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
ldom2_swap ldom2_swap@primary-vds0 disk@0 primary
ldom2_root ldom2_root@primary-vds0 disk@1 primary
VCONS
NAME SERVICE PORT
group1 primary-vcc0@primary 5000
[1657]root@server2ldom1:~# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1z3
inet 127.0.0.1 netmask ff000000
lo0:2: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1z2
inet 127.0.0.1 netmask ff000000
lo0:3: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1z6
inet 127.0.0.1 netmask ff000000
lo0:4: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1jboss
inet 127.0.0.1 netmask ff000000
lo0:5: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1apache
inet 127.0.0.1 netmask ff000000
lo0:6: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1z1
inet 127.0.0.1 netmask ff000000
vnet0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.10.0.21 netmask ffffff00 broadcast 10.10.0.255
ether 0:14:4f:fb:1a:ff
vnet0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1z2
inet 10.10.0.33 netmask ffffff00 broadcast 10.10.0.255
vnet0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1z6
inet 10.10.0.36 netmask ffffff00 broadcast 10.10.0.255
vnet0:3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1jboss
inet 10.10.0.34 netmask ffffff00 broadcast 10.10.0.255
vnet0:4: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1jboss
inet 10.10.0.35 netmask ffffff00 broadcast 10.10.0.255
vnet0:5: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1z1
inet 10.10.0.32 netmask ffffff00 broadcast 10.10.0.255
vnet0:6: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1z1
inet 10.10.0.74 netmask ffffff00 broadcast 10.10.0.255
vnet0:7: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1jboss
inet 10.10.0.87 netmask ffffff00 broadcast 10.10.0.255
vnet1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
ether 0:14:4f:f8:17:ff
vnet1:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
zone server2ldom1z3
inet 10.10.1.101 netmask fffffc00 broadcast 10.10.47.255
vnet1:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
zone server2ldom1apache
inet 10.10.1.5 netmask fffffc00 broadcast 10.10.47.255
[1701]root@server2ldom1:~# zonecfg -z server2ldom1jboss info
zonename: server2ldom1jboss
zonepath: /zones/server2ldom1jboss
brand: native
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: shared
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
inherit-pkg-dir:
dir: /opt/sfw
inherit-pkg-dir:
dir: /opt/
net:
address: 10.10.0.34
physical: vnet0
defrouter: 10.10.0.1
net:
address: 10.10.0.35
physical: vnet0
defrouter: 10.10.0.1
net:
address: 10.10.0.87
physical: vnet0
defrouter: 10.10.0.1
attr:
name: comment
type: string
value: server2ldom1jboss
[1702]root@server2ldom1:~# zonecfg -z server2ldom1apache info
zonename: server2ldom1apache
zonepath: /zones/server2ldom1apache
brand: native
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: shared
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
inherit-pkg-dir:
dir: /opt/sfw
inherit-pkg-dir:
dir: /opt/
net:
address: 10.10.1.5/22
physical: vnet1
defrouter not specified
attr:
name: comment
type: string
value: server2ldom1apache
Edited by: coreyva on Feb 18, 2012 11:36 AM

After further research, I think the best course of action will be to create a VLAN for the zone behind the BigIP and then create the corresponding interface in the vlan and zone. Using this links as my references in case anyone is interested. I'll post what I come up with.
https://blogs.oracle.com/stw/entry/using_ip_instances_with_vlans
https://blogs.oracle.com/stw/entry/solaris_zones_and_networking_common
http://docs.oracle.com/cd/E19253-01/816-4554/816-4554.pdf # AdministeringVirtualLocalAreaNetworks
http://docs.oracle.com/cd/E19053-01/ldoms.mgr11/820-4913-10/820-4913-10.pdf # Assign VLANs to a Virtual Switch and Virtual
Network Device

How do I delete multiple emails at the same time rather than individually?

How do I delete multiple emails at the same time rather than individually?

My mistake
I was looking at my KB, even tested my suggestion with the command key, and then wrote option
Barry

HT204406 Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

Begin by tapping on the Settings app.
Scroll to the Store menu and tap that.
This is where you can manage your Automatic Download settings. You can control Music, Apps, and Books (if you have the iBooks app installed) here. Slide to On any of the kinds of files you want iCloud to automatically download to your device.

How do I use my iSight camera through msn messanger rather than iChat?

Similar Messages

Maybe you are looking for