How do I Use my Old Hard Drive as a Portable Drive to Transfer and Back Up
Hi
Sorry if this is in the wrong place but I couldn't find another topic area.
So I recently upgraded my hard drive on my Macbook to a 300gb from an 80gb and now I want to use the 80gb as an external drive like a USB pen (it's already in an enclosure so I can plug it in via USB)
What I don;t understand is how I can clear the hard drive of the stuff I backed up from my computer and How i can keep updating the hard drive without the information on it being erased.
I am looking to be able to transfer movies and music from my brothers iMac to my Macbook and vice versa as well as storing some word documents on it.
Any help will be gravelly appreciated.
Thanks!
You should be able to do a complete reformat in Disk Utility. The utility calls this "erase" and gives you the choice of format. You might use MS-DOS (FAT32) if you want to swap files with PCs, but there a 4GB file limitation, which I've run across with large archived DVD images. Normally people use HFS+ if it's exclusively going to be used in the Mac enviroment.
Similar Messages
-
How can I use my external hard drive for my iphoto instead of my mac book pro memory?
i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN -
How can I use a firewire hard drive on a new Macbook with one USB-C only?
How can I use a firewire hard drive on a new MacBook with only one USB-C?
kaz-k is correct about FireWire not being supported by any possible connector or adaptor to USB-C and never will. However, there is no such thing as a FireWire Hard Drive. There are only SATA (or if it is a really old one, ATA,) drives in a FireWire enclosure. If you can remove the drive from the case/enclosure - bust it open somehow if it is a glued-up unit - then the drive can be placed into a regular USB3 enclosure. Then it can connect to the new MacBook via any one of the adaptors Apple sells.
-
How do i use an external hard drive for all my itunes music?
how do i use an external hard drive for all my itunes music?
Hi valleydave,
Here are two good links for you to check out:
http://support.apple.com/kb/ht1751
http://support.apple.com/kb/ht1449
The first one goes over, in-depth, what you're looking for in regards to "off site" iTunes. -
How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?
If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC -
I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer? Both computers have OS X10.9.3. Currently they are connected by a Firewire 800 cable.
You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
Matt -
How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library
read this
https://discussions.apple.com/message/20429789#20429789 -
When I upgraded to ios 5, it asked me a for a new game center name. How do I use my old game center name, since it makes me start some games over without it?
Carefully follow steps 1-9 outlined by wjosten in this post: https://discussions.apple.com/message/13356770#13356770. This will not, however, avoid wiping any non-purchased media from your phone (ripped CDs, etc.) as this is only synced one way: from your computer to your phone. You will have to either rebuild your iTunes library with this content and sync again to restore it to your phone, or purchase 3rd party software to copy it from your phone to iTunes prior to syncing (such as Touch Copy).
-
How can I use my old mac 24" as a second monitor? What cable do I need?
https://discussions.apple.com/docs/DOC-6351 may offer some techniques.
-
How can I use my old iPhone 3G as an iPod touch?
How can I use my old iPhone 3G as an iPod touch?
See Here for Details...
Use iPhone as an iPod
http://support.apple.com/kb/HT3406 -
How can I use my old AirPort Express?
How can I use my old AirPort Express (the one that plugs right into the wall without a power cable) to stream music to a stereo when I am using the new Airport Express? The AirPort Utility 6.1 will not recognize the old AirPort Express.
Apple does not make it easy for you to use an older device when they want you to buy newer devices.
See this link for tips on how to install a version of AirPort Utility on Mountain Lion that will allow you to configure your older Express:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
This is not supported by Apple, so it is your decision on whether you want to move forward with this. It works fine for me, but I cannot guarantee that it will work for you, nor offer support if you have difficulty. -
I recently updated my primary email address associated with my Apple ID account.
Now when I go to App store on my iPad it still tries to login to the App store using the old email address I had associated with the account, and naturally my password doesn't work. I can't figure out how to tell my iPad to login using the updated email address.
So in effect I'm locked out of the app store and I currently have 26 updates waiting.
I've tried disconnecting and reconnecting my IPad to iCloud with no luck.. However I cloud happens to show the correct/updated email address.
Does anyone know how to resolve this?
ThanksDid you change the email for the Apple ID or did you create a new Apple ID? A new Apple ID cannot be used with content that was bought using a different Apple ID.
Changing the email address you use for your Apple ID -
http://support.apple.com/kb/HT5621 -
How do I use Automator to duplicate a folder with graphics on my desktop and erase their Resource forks?
I do not use command line and tried to use ZapResourceForksAMAub_1.2 which I downloadedand instaled the Zap Resource Forks.action. Next I tried to use their sample copy-zap-rsrc.workflow in Snow Leopardon my Mac Pro. The 3 different steps are displayed in Automator but there is no place to put in which folder (on my deskto) to copy, and remove the resource forks from the graphic files.
Can sombody please step me through this please please.
W.W.Unfortunately, Back to My Mac only works across computers using the same iCloud account.
-
I have 2 Apple ID's, how do I delete the old one as its interferring with my new account and the music I have already purchased through ITunes does not want to play. Any suggestions?
Why would you create a new account?
All purchases will be tied to the account from which they were purchased.
You will have to authorize your computer for all the accounts from which music is purchased. -
Just sent in my daughter's Ipod touch 5th generation to be fixed.....They sent me a new one. Is there any way to get the contents of her old one onto the new one? I synced the old one with Itunes before I sent it in and backed it up on my computer.
Sure, as soon as you open iTunes with the new iPod connected, it will have a "Welcome to your New iPod" screen. Just choose Restore from backup.
Maybe you are looking for
-
How to change default pic in email account?
i noticed that when i send emails on my ipad there is a little picture in the upper right hand corner of every email i send. sort of like an account ID picture type thing that one has on their individual accounts on their computers. but the thing is,
-
How to display dynamic signature in Smartforms?
Hi, Someone could help me in displaying dynamic signatures in SmartForms?. The signature is an attached file to the document. I already have the binary file but I don't know how to display this as an image in the Smartforms. Thanks in advance, Oliver
-
I installed a second hard disk to use as a backup a couple of years ago and it has always worked perfectly. Now it doesn't show up. What can I do?
-
Is it a lousy tutorial or a lousy IDE???
Hi, Sorry for the offending subject but I hoped to get your attention. Can someone please certify that the tutorial is still valid against the latest JDeveloper? There are several posts on the oracle.jbo.NameClashException: oracle.jbo.NameClashExcept
-
Windows 7 compatibility issues with Studio 8
Hi guys, Sorry if this question has been asked before. I can't afford to upgrade my Studio 8, and I would ideally like to install it clean on my Windows 7 rig which is working fine. I understand that there is an issue with Flash and Windows 7, and I