How do I use my original iphone for videos & apps only, not as phone

I want to use my original iphone as a video and app player(not a phone) for my daughter, using my library of purchases on my account. I have an iphone 3G and my original iphone is not being used. How do I do this?

After an iPhone is no longer activated, you can't install a firmware update or restore the iPhone with iTunes (which re-installs the firmware) since activation is required in order to do so.
I'm not aware of a way to roll a restore back.
If you have the SIM card that was used when this iPhone was activated, you can try inserting the SIM card and do another restore. Someone here reported that it is possible to install a firmware update or restore an iPhone with iTunes that is no longer activated as long as the SIM card that was used with the iPhone when activated is inserted.
Message was edited by: Allan Sampson

Similar Messages

  • I Have and iPhone and iPad. How can i use Finder my iPhone for both devices.

    I Have and iPhone and iPad. How can i use Finder my iPhone for both devices?

    http://itunes.apple.com/us/app/find-my-iphone/id376101648?mt=8
    That app is also compatible with the iPad and requires iOS 3.1.3 or later.

  • How do I use my original iphone as a music player?

    I've upgraded my iphones through the years, but I always kept my first one.  It's an 8GB original iphone, and I'd like to give it to my 12 year old to use as a music player with itunes.  I tried connecting it to my current itunes (11.0.3.42), and it doesn't even recognize a device is connected.  It just displays the icon of a USB connector and an arrow pointing to an itunes icon.
    Do I need to install an old version itunes to make it work?  Where do I find links to old itunes downloads?
    Is there anything else I need to do to make it work?
    Has anyone else done this recently?  Thanks for any help.

    I'm not sure what you've tried already, but have you considered reset, restore or both?  I had recently done this to my iPhone-1st Gen for a different reason.  After the restore, make sure to give the iPhone-1 a separate name from your main mobile device. 
    The new name is only so you can recognize the different sync settings and playlists on the older device.  iTunes software can tell the difference wheter you rename or not.  Just make sure that you always use the correct backup when you sync, reset or restore.
    How to Reset
    Two Button Reset.
    This is the least likely to result in loss of data.  Read that again, especially the phrase "least likley."
    Disconnect the iDevice from the computer.
    Press and hold both the home and the sleep/wake buttons (ignore the red slider) until you see the silver Apple logo.
    When you see the logo, let both buttons go.
    If this worked, you should see an icon instructing you to connect to iTunes.  My guess is that the reset did not work.
    How to Restore
    DFU Restore
    This will very likley result in loss of data.
    Connect the iDevice to the computer.
    Ensure that it is running the latest version of iTunes and that it has access to the internet.
    Press and hold both the home and sleep/wake buttons for exactly eight seconds.
    Release only the sleep/wake button but continue to hold the home button for another five seconds.
    Let go of the home button, then look at the computer screen for an instructional popup.
    The popup should say "iTunes has detected a device in recovery mode. . .(etc)"  Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
    If no popup appears, repeat the above DFU instructions.  If you've never done a DFU, it may take about three attempts to get the timing right.

  • How would I use a credit card for In-app purchases instead of my gift card credit?

    I have a gift card credits linked to my account, but I do not want to use it for an in-app purchase.  I want to use my credit card for the purchase.  Is there any way around this?

    You can't for in-app purchases, when you have a balance on your account then that will automatically be used for your purchases.
    For other types of purchase you can try gifting the item to yourself so that your credit card is charged (gifting can only be done via a credit card), but you can't do that with IAPs.

  • How do I find my original receipt for an app download of a game? Teamlava won't restore my original game if I don't have the original receipt!!!

    My iPhone 5 was defective & all info backed up to my cloud. Teamlava/ storm 8 dragon story was lost with new phone :-( app developer refuses to replace original game because I have no idea where original download receipt is!

    The iTunes Store emails the receipts to you about 24 hours after you make a purchase. Unless you deleted the receipt it should be in your email client.
    However, you should be able to redownload your purchases from the Purchases list in the App Store app on your device. As long as the developer still sells their app through the iTunes App Store and has not released a major paid upgrade. Only the most recent version is available from the store.

  • How do I use my I'd for the app store and not my wife.

    IT always ask for my wife password and I need it to ask for my password. So I need to change it so it will show my ID and not hers.

    Tap on the id in Settings > Store and log out of it and you can then log in with your account. But any apps (and other content) that were downloaded by your wife's account will remain tied to her account, so only her account will be able to download updates to her apps

  • How to set column widths in tables for selected table only, not globally throughout document?

    I've been utilizing the below script (thank you so much Ramkumar. P!) to set column widths throughout a sizable InDesign book with tables on every page and it is truly a time saver. At this point in time, I have three versions of it because there are different column widths throughout the book. Is it possible to augment the script to run only on a selected text frame (containing a table)? If so, would someone be kind enough to share the augmented script with me? I've been trying to figure out this seemingly simple change through trial and error with no success as yet. I realize this is a totally newbie request and I'm entirely at the mercy of the kindness of the Javascript gods that contribute within this forum. Seeing that in a different post related to this script, one such guru responded to a request as simple as "Where do I put the scripts in InDesign" gave me enough courage to ask for some help! Thank you in advance to anyone willing to provide a solution.
      var myDoc = app.activeDocument;
         var myWidths = [100, 100, 150, 150];
         for(var T=0; T < myDoc.textFrames.length; T++){
             for(var i=0; i < myDoc.textFrames[T].tables.length; i++){
                 for(var j=0; j < myWidths.length; j++){
                     myDoc.textFrames[T].tables[i].columns[j].width = myWidths[j];
         alert("Table width updated successfully...");

    Hello all
    I have the same problem in that I'm not a scripting person, but was able to get the above script working without problem, and it does set irregular table column widths perfectly, so thanks to Ramkumar. P for that.
    BUT, it changes the column width for ALL tables in the document, whereas I would like to just target the selected table.
    Any ideas as to how I might amend this script to achieve this?
    Thx, Christian

  • We have two iphones and only one ipad.  We want to be able to use "find my iphone" for both phones, which have separate apple ids.  How do we get our ipad to accept this?

    We have two iphones and only one ipad - no mac.  We want to be able to use "find my iphone" for both phones.  How do we get the ipad to accept two iphone accounts?  icloud is enabled on all three devices. 

    Also, be aware of the following:
    The "Find my..." function is pretty much useless if the device is in the hands of a thief.  All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
    The only real protection you have is with the personal information on the device rather than the physical device itself.  Something as small as an iPod/iPhone should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

  • How can someone use a stolen iphone? does erasing the phone (which I feel like I should do) make it easier for the thief to use the iphone?  If I don't erase it, it doesn't seem like anyone should be able to use the phone because of my password.

    how can someone use a stolen iphone? does erasing the phone (which I feel like I should do) make it easier for the thief to use the iphone?  If I don't erase it, it doesn't seem like anyone should be able to use the phone because of my password. Also, is it possible to retrieve anything that has been sent to the phone (i.e. text messages) since it was stolen through icloud? The "find my iphone" app says the device is offline but it rings when I call my number -- any idea how that would be the case? Thanks!!

    You have a password, so good move on your part.  Whether you erase it or the thief does, they still get to use the iPhone as theirs.  Which is more important (pick one), protecting your data or punishing the thief?
    Ringing occurs at the carrier.  Chances are you're going to voicemail after only two or three rings.  If you have an iCloud backup also a good move.  Re-read my question in the first paragraph.

  • I want to use my old iphone for my kids as an ipod.  How do I keep from getting text messages on it when it is turned on?  If it is on, and my droid razar is on, text messages will go to the iphone. It is either a 4 or 4s ...I don't have Siri, so I think

    I want to use my old iphone for my kids as an ipod.  How do I keep from getting text messages on it when it is turned on?  If it is on, and my droid razar is on, text messages will go to the iphone. It is either a 4 or 4s ...I don't have Siri, so I think it's a 4.  Thanks

    Another thing to remember is the phone is actually usable for 911 calls and maybe others. Not a real good idea. Especially for a child.
    It would depend however on the age of the child.
    Good Luck

  • How do I use my own photos for screensaver in Mountain Lion

    How do I use my own photos for screensaver in Mountain Lion.  I cannot see how to use my photos.  It seems that the screensaver is set with factory settings.  There appears to be no alternative.

    Check out 'More like this'    >>>>>>>>>>  (Next to your original post).
    There are several references to this problem ... and some ideas.   Always a good place to look.   Don't overlook the links within the posts.

  • How can I use my french Iphone in Thailand?

    Last June, I bought an Iphone in France with Bouygues operator. As I have to leave for Thailand, I ask them to unlock my Iphone, I had to paid 70 euros for it. They asked me to wait about 1 week. I am now in Thailand. Yesterday, I plugged the Iphone to Itunes and I guess the unlock was done as my Iphone was updated. I bought a new SIM card from a thai company... and it doesn't work.
    I went to ask to some shop and they said that my version is 3.1.2 and in Thailand it's only 3.0...Is that the reason I can't get a thai SIM card? What should I do? How can I use my french Iphone in Thailand?

    HI,
    Using an iPhone While in Another Country
    Carolyn

  • How do I use "Find my iPnone" for 2 phones?

    My 12 year old has an iphone as do I. How do I use "Find my iPnone" for both phones? He cannot have an itunes account due to his age. My ipad will show the location of my phone but not his. He must use my iTunes account because he is too young for his own. Any suggestions?
    Thanks everyone.
    Kent

    Go into Preferences and set up your MobileMe account on his phone and enable find my iphone. You do not have to enable mail, calendar or contacts (if you have a paid account. If you are using the free service only find my iPhone is available). Then set a restriction password and disable the ability to modify account settings so he can't shut it off.

  • How can I use my old iPhone 3G as an iPod touch?

    How can I use my old iPhone 3G as an iPod touch?

    See Here for Details...
    Use iPhone as an iPod
    http://support.apple.com/kb/HT3406

  • How do you reactivate  an original iPhone to a new account?

    I upgraded my original iPhone with a new 3GS a month or so ago. I did not change sims. The original iPhone still has it's original sim and has been used as an ipod touch for the last month or so and my 3GS has my original phone number with it's new sim it came with.
    I now want to switch my husband from his Verizon account onto my AT&T account and have him use my original iPhone. I know I need to arrange with AT&T to add a line to my account but I want him to keep his phone number. Do we put the sim from his blackberry in the original iPhone, will AT&T give me a new sim, or will they somehow activate the original sim in it?
    If I can do this over the phone without having to go into a store (using either my original sim or his sim) then that would be easiest.
    Maureen

    im sorry i do not know but can u tell me if i can sync to a droid phone

Maybe you are looking for

  • HP 2320 network printer keeps dropping off network

    I have a small home network, running off a current gen TimeCapsule. I have an HP Colorlaser CM2320 network laser printer connected to a 5-port switch on the network. Randomly, the printer disappears. When selected in a print dialog, the satus is offl

  • How to calculate the results in SAP HR TEM

    Hi Experts, I am the fresher of SAP HR(TEM)consultant.My client wants to upload the historical data into SAP HR TEM. When i am calculating the results of employees, that means competent or non competent using with followup transaction code, but it sh

  • Problem in concurrent update in ADF BC (compare to oracle forms)

    Hi, I am using JDeveloper 10.1.3.3. I created a simple form on EMP table using JSF/ADF BC template and then I browsed the EMP form with 2 separate browsers. Both browser were on the same record (for example SMITH record). I changed the value of salar

  • Registered Trademark Symbol will not render in Outlook 2010.

    I am designing an HTML email with a product name that has a registered trademark symbol: ®. I have tried 3 different methods to get this symbol to render in Outlook 2010. Option + "R" to create the symbol, using ® and &#174. They all render with one

  • The internal microphone is not working

    the internal microphone is not working