How do i use my own dhcp server with airport extreme

I just bought an airport extreme and I'm trying to replace my linksys router and another access point.
I have my own dhcp/dns server and I want to continue using it. So far, I was not able to find the way to use NAT without DHCP (like I'm doing now with my current setup).
I want to give the device another chance before I return it to the store. Is there anything I can do?
Thanks

I thought that you could figure out the answer for yourself, but if you need more confirmation.....the choices/options that you need do not exist on an AirPort router.
Cisco or Netgear might be brands to look at. Good luck in your quest.

Similar Messages

How do I use time machine back up with airport extreme

I want to use my airport extreme to back up with time machine, I am not that good with computers, so could some one please explain to me how to do this.
Thanks
Ben

Unfortunately, Apple does not support Time Machine backups to a hard drive at the USB port of the AirPort Extreme due to corruption issues.
Despite this, some users who have tried this have success with this, some limited success and some no success.
Our recommendation would be to connect the hard drive directly to your computer and use Time Machine that way.
To do this, you would need to make sure that the hard drive is formatted in Mac OS Extended (Journaled), or buy a hard drive that has been pre-formatted for Mac. Then connect the drive to the USB port on the Mac.
After that, you would open System Preferences (gear icon on the dock), then open Time Machine to turn it ON, click Select Disk to select your hard drive and then click Use For Backup. That will get Time Machine backups going.

How do i use my own domain name with creative cloud?

how do i use my own domain name with creative cloud?
i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
thanks!!
Lori

http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

Using a router or switch with Airport Extreme

I currently have an Airport Extreme 5th generation working great for my home network! My ISP Modem (on ground floor "Level-B" of 3 story house including basement) attaches to the Airport Extreme via an ethernet cable into the WAN port. Then each of the 3 LAN ports is in use:
#1 going to my "main Mac" - MBP-13" just a few feet from the Airport Extreme in my lower level basement office (Level-A)
#2 going upstairs to a non-WiFi eMac (Feb 2005) - that's on Level-C
#3 going to my Canon MP640 printer/scanner so that I can use it for scanning (it is attached via USB to the Airport Extreme but that does not permit scanning) This is located next to my MBP on Level-A
OK but now I want to try to get my 1997 LaserWriter 12/640 PS (works great!) (and I have 2 expensive toner cartridges left!) set-up and I have some instructions on how to do this. It will likely necessitate me having my Mac Pro G4-733 running OS 9.2.2 and the LW 12/640 both connected to my network via ethernet cables. That's 5 connections and I only have 3 ports going out.
But I do own a D-Link DIR-635 router and also an 8 port Peabird 8 por 10/100 Switch. Can I use either of these to do the setup?
OR - can I simply unplug the MP640 printer and the eMac for an hour or so that it will take to configure (if I can) the LW 12/640?
OK but then if I do configure it, I won't need the G4-733 Power PC any longer, but I will want the LW 12/640 as part of my network so will at least need a 4th ethernet port at that time. Do I then need to attach the router (or switch) and then connect the LW12/640 (and something else as the router or switch will use up one of the 3 Airport Extreme ethernet LAN ports…)
Thanks for any comments on how to proceed here.
Best regards,
Steve Schulte
Monday 14 January 2013

Still have not found time to try to connect the Apple LaserWriter 12/640 but it is on my list-- have gotten that list down to just a few items--- so making progress!
Now how to get my Apple Stock…………
Best regards,
Steve Schulte
Thursday 24 January 2013

Using an External USB soundcard with Airport Extreme Base Station

Hello, I own a macbook, an airport extreme base station and a Native Instruments Audio Kontrol 1 USB 2.0 external sound card that works like a charm with my macbook. I have a printer and a hard drive connected to the USB from the Airport base station through a hub, and I was wondering if there is any way I could make my macbook recognize the external sound card when connected to the base station's USB port. I would like to be able to play music wirelessly through the base station but the application/driver from Native Instruments does not recognize the sound card plugged to the router.
Thank you

if there is any way I could make my macbook recognize the external sound card when connected to the base station's USB port
First welcome the the Apple Discussions Forum!
To your question - it's highly unlikely, sorry!

Using a current Time Capsule with Airport Extreme and Airport Express Older generation

I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet? I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6. Is there a tool to assess the local network speed?
The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing. Not even streaming music seems to work and it stutters to halt.
I had expected that the dual band functionality would allow fast local connections where needed. What do I need to change?
Thanks you.
Tom

Hi Bob,
The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
- round extreme base station supports a printer only - remote WDS indicated in set up
- airport express supports remote speakers - set up does not indicate WDS status
I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network. Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network. It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network.
Obviously, this will need some more experimentation but any input would be appreciated.
Thank you and regards,
Tom
PS> Timezone wise I am currently living in Australia - must change my profile one day.....

Static IP-ed server with Airport Extreme 802.11ac

Howdy, y'all, In support of an app for remote users, we wanna expose a Win server using a static IP from our cable provider. The ISP has provided us with the static IPs, DNS IPs and a gateway IP. At the moment, the Win server is on a subnet routed by our new Airport Extreme 802.11ac receiving a reserved IP. If I configure the Win server with the static IP settings from the ISP, there's no Internet connectivity because the gateway IP is a different subnet. When I connect the Win server directly to the cable modem and bypass the Airport Extreme, the Win server has Internet connectivity. I suspect that I'll hafta use a separate switch between the cable modem and the Airport Extreme for the Win server. I think that we'll then have departmental Wi-Fi routed by the Airport Extreme. Any other suggestions? Thanks much.

Do you only have a single IP??
If so you cannot give that IP to the win server.. then you have no other network connection.. or internet from other clients.
But you can simply put the Win server with a static LAN ip set via dhcp reservations and then set the win server as the default host.. all packet incoming to the public IP are then passed to the Win Server.
DHCP reservation on the network tab of the airport utility.
Default host is under Network options.
You will still use the AE as main router and set wan to either dhcp which should work fine or the static IP.

How do I bridge motorola NVG510 to work with Airport Extreme

Hey everyone, I need some help.
I just got uverse and they sent me a motorola Nvg510 router. I need to put it under bridge mode so I can use the airport extreme and use the guest network functionality. I don't know what settings to put the motorola router and the airport extreme. Any help would be greatly appreciated. Please let me know if I have to provide any more information.
Thanks,
AC

I've put up a webpage to explain how to "force" the modem in effective bridge mode here:
http://www.ron-berman.com/2011/11/24/motorola-nvg510-help-page-for-att-u-verse-u sers/
(See question 6).
To get the IP address, just use what your NVG510 reports as "Broadband IPv4 Address" in the Broadband tab of its configuration page.
This address is mostly static (hasn't changed for me in months), and will only change where AT&T make a physical change on the line.
- Ron

Using an external hard drive with Airport Extreme

I'd like to use an external hard drive to store movies and music through my Airport Extreme. The drive is connected to a powered usb hub which is connected to the Extreme. I can see the drive in Airport Utility but I can't figure out how to use it.

Hi,
I have just tried to set up an Airport Extreme with an external hard drive at home. I have 4 computers connected to the "network" - an iMac, a MacBookPro and 2 x windows machines. A printer is connected wirelessly to the two Macs.
I cannot find the hard drive - I have tried the steps mentioned by Bob Timmons Mar 17 2010, but the only things I see under "Shared" in Finder are the iMac and the printer - not the Airport Extreme (seems odd??), not the windows machines, and most importantly, not the hard drive connected to the USB port on the Airport Extreme.
I therefore expect that the iMac and printer are connected wirelessly and directly, rather than through my network (& I'm happy for the printer to be connected this way, but I do need the PCs and the hard drive all networked).
According to my network connection, (in top bar on the screen) I am definitely connected to the network - yet nothing else shows in finder??
I do, however, see the USB hard Drive when I go into Finder>Applications>Utilities>AirportUtility.app, under my Airport Extreme >Disks. I've also gone through all the set up procedures for "File Sharing."
I have read other posts about formatting the hard drive ether FAT32 or NFTS - is this something I now need to do?? If so, which one should I use, and once I do it, will I then see it?
Presumably, in order to format the Hard Drive, I will need to disconnect it from the Airport Extreme, and connect it directly to one of the Macs too?
My apologies for so many questions, but this is all very technical stuff for the non-techie layperson.
Many thanks for any help anyone can provide on one or more of the questions / issues.
Martin

Using Windows 7 Remote Desktop with Airport Extreme...help!

I recently purchased an Airport Extreme to replace an old Linksys router I had. Its works great, but I'm having an issue when I send my brother a remote desktop assistance link in Windows 7. We are both running Windows 7 and never had this problem in the past, but now that I'm using an Airport Extreme it wont connect. Tech support could not provide the correct ports that needed to be opened. I'm thinking it has something to do with NAT PMP (Apple) and UPNP (Microsoft). We have opened ports 3389 and 491152 - 65535 but no luck.
So my question...how can I enable the Airport Extreme to allow Windows 7 Remote Desktop Assistance?

Sorry, that should be remote "assistance" not "desktop"

Maximum number of DHCP clients with Airport Extreme (802.11n)?

I see in the documentation that the number of wireless clients that the new Airport Extreme can handle is 50, but it doesn't indicate that it can handle more than 50 via the LAN ports.
Has anyone connected one of these units to a network with more than 50 simultaneously connected (wired) computers?
Thanks much.
Scott
Ti PowerBook G4 Mac OS X (10.4.9)

Yeah, I knew I'd have to answer that question eventually. I debated including that information with my initial post--I should have. Sorry.
I realize that it's a home unit, and it will be when I'm done. I need to set something up as a temporary solution for a LAN party at our college, but I need to keep it separate from our regular network.
I've got all the switches I need (we usually get by with 3 unmanaged Cisco 24-port switches). I'm just looking for a solution that is simpler than reconfiguring a Linux machine as a DHCP server and gateway for a three-day LAN bash--I am more interested in the DHCP server functionality. So, has anyone seen one of the new units give out IP addresses to more than 50 clients?
Thanks,
Scott

How to tether Mac pro to existing wifi with airport extreme

Wifi where I live. Need Mac pro on net. Have airport extreme. Does apple disable this for marketing reasons to sell wifi internal card? Or, can I use what I have? Thanks! Using Lion
BTW. Mac is less stable with Lion!!!! Like using microsoft used to be :-(

2009 and earlier Mac Pros did not include a Wi-Fi card in the standard configuration.
Check the System Information app (in the Utilities folder) -> Network -> Wi-Fi and see if it indicates a wireless card is installed.

How do I use my own domain name with Mac server with iWeb

For a number of years I have had my own domain name that when typed into a browser it would redirect the browser to my site on the .Mac server. I hear with iLife ’08 I can have my own domain name hosted by .Mac so I know longer have to have the long addresses for each pages the I have now for my site (i.e. the http://web.mac.com/thewildhearts/WildheartPhotography/NatureGalleries.html). How do I go about getting my domain name (wildheartphotography.com) so that Mac will host it and do I need to notify the current host that Mac will be hosting my site now?
Thanks. I really appreciate the help I get from this forum.
Pat

It's very easy, really. You go to your domain control and redirect the address. IPower, for example points the domain name very easily: you just type in the URL of your site and it will point to your mac server.
I've used GoDaddy before and it is a bit more difficult to "point".

How can i use my synology iTunes Server with the iTunes from my iPad?

Have anybody the Same Constalation @ home? I like to have Access to my synology iTunes Server from my iPad via iTunes without a thirdparty App, to have Access to the Central Data like Music, etc.? Have some One expirence with the configuration and implementation?

It will almost certainly not be possible. If you don't sign up for AT&T service for the iPad, then replace your Sprint card with a MiFi or Overdrive device from Sprint. This will use your Sprint service, but connect to your iPad using Wi-Fi. It also has the advantage of you being able to use it with any Wi-Fi capable device. IOW, you can use both your laptop and iPad at the same time with the MiFi or Overdrive, but only have to pay for one Sprint account. Of course, all devices that connect to the MiFi or Overdrive will use up your 5GB allotment, unless you use Overdrive in a 4G area. (Overdrive is unlimited on 4G, but has a 5GB cap in 3G areas.)

How do I use my WD Cloud Server with iTunes?

Hi,
I have a WD Cloud Server on which I have placed all my music. I have turned on HomeSharing, but I do not seem to be able to access music that is not in my iCloud. Also, I cannot change or create any new playlists. Any ideas?
Thanks

I thought that you could figure out the answer for yourself, but if you need more confirmation.....the choices/options that you need do not exist on an AirPort router.
Cisco or Netgear might be brands to look at. Good luck in your quest.

How do i use my own dhcp server with airport extreme

Similar Messages

Maybe you are looking for