How do I use my own playlist with "Spotify Running"?

I was excited to see the Spotify Running shows up on my phone app now. But I can't find a way to tell it to use which of my own playlists to you. I can only see the pre-made playlist from Spotify.     It must just be me. I'm sure Spotify wouldn't have created a feature that forces you to always listen someone else's runnning music.

At the time, you wrote that the Running feature was still being rolled out. Not everyone got it at once. I assume you have it now. If not, make sure you have the latest update. There was no decent communication or explanation of when it would be availble. Lots of confusion about this feature overall.

Similar Messages

  • How do i use my own image with keying (or green screen)

    how do i use my own image witrh keying (or green screen)

    Put your sky clip on a layer below the clip you want to key. One or the other will be a connected clip. Apply  the Keying filter to foreground clip (the one with the green screen). The green will be seen as transparent and the sky will show through as the BG. Adjust as necessary in the Inspector.
    Good luck.
    Russ

  • How do i use my own domain name with creative cloud?

    how do i use my own domain name with creative cloud?
    i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
    thanks!!
    Lori

    http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
    I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

  • Always used 1 main account.  Started using individual user accounts. So how do I use software or applications with a lot of data like Quicken under my own user account?

    I recently upgraded our family's mac to OS X.  I thought this was the perfect time to create and use "user accounts".  We had always used 1 main account.  So how do I use software or applications with a lot of data like Quicken under my own user account?  I wanted to be able to manage my own itunes library, iphone apps, messages.  But I still really need to use the Stuff I have in Quicken essentials.  I don't want to have to restart all my work done in Quicken already.

    I haven't used Quicken in a while, but most applications store your files in your Documents folder. Is that where your Quicken data file is? What you do next depends on how many family members need to get at that data.
    If multiple family members need to use the Quicken data file, try moving it to the Documents folder in the Shared account. That is an account that all accounts can see. It's at the same level as the other accounts. In other words, Shared is one level up from your Home account, or Hard Drive/Users/Shared.
    If you're the only one allowed to see that Quicken data, move the Quicken data file from the old main account to your account, and don't leave a copy behind. You can use the Shared folder as a way station for the transfer since you won't be able to see both accounts' Documents folders at the same time (because you're not allowed to peek into other people's accounts). Or you can use another disk or server for the transfer, as long as you can get to it when logged into either account.

  • How To Use Your Own Router with Out Loosing Verizon's FIOS Services

    How to use your own router with Verizon’s FIOS Service
    First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal.  Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity.  The fiber cable terminates at the Optical Network Terminal or ONT for short.  The ONT converts the optics into a digital signal that can be utilized by ones equipment.  From the ONT your video, phone and internet are provided to the location.  This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable.  It is important to identify and understand the differences of these two setups.  In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
    How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port.  Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router.  There are multiple methods for doing this and I would recommend investigates which one make the most sense.   
    In my particular case the IP signal was provided by Ethernet.  Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge.  This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.   
    The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT.  I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs.  These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition.  At the very least they can point you to the right direction.  Once you have a NIM the rest is rather simple.
    Log into the current Verizon Router.
    Located the router’s MAC address and copy it down.
    Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.
    Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
    Example:
    IP-STB1
    Connection Type: Ethernet
    * IP Address: 192.168.1.100
    IP Address Allocation: DHCP
    *MAC Address:                07:73:fFe:ad:8b:3f
    * Things you will need to write down
    Go to the network section and look for the main Ethernet connection.  Select this and then select more setting, typically found at the bottom. Release the current lease.
    Remove the Verizon router
    Install your router
    Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
    Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s  (note their IP’s start at 192.168.1.100)
    Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.  
    Add the port forwards from Step 5 above.
    Clone Verizon’s Mac Address utilizing the info from step 2
    Finish setting up the router in typical fashion.
    Unplug and re-plugin your STB’s and test functionality.  It’s best to try using a widget or Movie on demand function.
    Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.  
    EVERYTHING should be working at this point.

     3 Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.G
    Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
    whatever, the STB's start at 192.168.1.100 and icement by 1 for each
    the port addr's will be 63145 alo incrementing by 1
    there is 1 entry for each in my pf list
    however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
    For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
    Why do you clone the mac addr??

  • How can I use find a phone with my family members but they each have there own email

    How can I use find a phone with my family's iphone when they already have email addresses?

    Welcome to the Apple Community.
    You can't use find my phone from your phone if your other family members use another iCloud account.
    You have two options depending on why you want to find the phones.
    Use find my phone at iCloud.com on a mac/PC and log in using their account.
    Use the find my friends app

  • How do i use 2 ipod touches with 1 itunes account?

    how do i use 2 ipod touches with 1 itunes account?  can they share apps and music etc. I'm not very good at any tech so advise would be much appreciated.

    Yes. You can sync an unlimited number of iDvies that you control to one iTunes library/account. If using the same iTunes library on the same comutr just make sure that yu go to the ap. music and other pane for the iPod in iTunes and select sycn selected items. Not the the whole library.  That way each iPod can have it own contents.

  • How do I use my own photos for screensaver in Mountain Lion

    How do I use my own photos for screensaver in Mountain Lion.  I cannot see how to use my photos.  It seems that the screensaver is set with factory settings.  There appears to be no alternative.

    Check out 'More like this'    >>>>>>>>>>  (Next to your original post).
    There are several references to this problem ... and some ideas.   Always a good place to look.   Don't overlook the links within the posts.

  • How do I use Edge Web Fonts with Muse?

    How do I use Edge Web Fonts with Muse - is it an update to load, a stand alone, how does it interface with Muse? I've updated to CC but have no info on this.

    Hello,
    Is there a reason why you want to use Edge Web Fonts with Adobe Muse?
    Assuming you wish to improve typography of your web pages, you should know that Muse is fully integrated with Typekit. This allows you to access and apply over 500 web fonts from within Muse. Here's how you do it:
    Select a text component within Muse, and click the Text drop-down.
    Select Add Web Fonts option, to pop-open the Add Web Fonts dialog.
    Browse and apply fonts per your design needs.
    Muse also allows you to create paragraph styles that you can save and apply to chunks of text, a la InDesign. Watch this video for more information: http://tv.adobe.com/watch/muse-feature-tour/using-typekit-with-adobe-muse/
    Also take a look at these help files to see if they help you:
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-1.html
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-2.html
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-3.html
    Hope this helps!
    Regards,
    Suhas Yogin

  • How do I use Qt and OpenGL with Visual Studio

    Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
    I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
    Embedded firmware design(C and Assembly).
    The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
    Thanks
    Alexandros

    Hi ClassicalGuitar,
    The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • How do i use my mac book with my HP 6510 e all in one series printer

    how do i use my mac book with HP photosmart 6510 e all in one series

    Hello Marilynatsea,
    Thanks for using Apple Support Communities.
    To learn more about printing in OS X on your Mac, and how to add a printer, take a look at the article linked to below.
    Mac Basics: Printing in OS X - Apple Support
    Cheers,
    Alex H.

  • How do I use my gigaware webcam with my mac?

    How do I use my gigaware webcam with my mac? I just bought this webcam on amazon http://www.amazon.com/gp/product/B00IJE0ISS/ref=oh_aui_detailpage_o07_s00?ie=UTF 8&psc=1 and I want to use it with my mac. Is there an adapter or any software to make it compatible? Thanks.

    Your amazon link states, in part, that this webcam is:
    Compatible with Microsoft Windows 7,Vista, XP, 2000
    Use a Mac OS X Compatible Webcam like one of those shown in the linked article instead.
    For best compatibility and security, also update your OS X Mavericks (10.9.2) to the current OS X version by restarting Mac and then downloading and installing OS X Mavericks 10.9.4 Update (Combo).

  • How do I use a foot pedal with my mac?

    how do I use a foot pedal with my mac to use on YouTube?

    Can you be more specific? What kind of foot pedal? What is the foot pedal used for?

  • How do i use a new computer with my ipod?

    how do i use a new computer with my ipod?

    See this apple support communities user tip…
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • How do I use cell number associated with iPad 2 3G

    How do I use cell number associated with iPad 2 3G

    For Messages you can can use your email address, the iPad doesn't have a phone number that you can use.

Maybe you are looking for