How do I use my PC for tv audio?

How do I use my pc audio (Audigy 2ZS) as the home theatre sound system? I have a 5. surround sound on my pc which reside in our living room. I was hoping to setup a 5. surround system for our home theatre but I can only plug in one set of speakers into my pc. Is there a switch system or someway to have my pc control both sound system and just switch between pc and home theatre? Our original home theatre just died.
thanks

First of all, what do you mean by plug in one set of speakers on your PC? if am not mistaken the card has 3 plugs for a default 5. surround sound. Yes your card can do 5. surround soud, but for that you need to have the 5. surround sound speakers, otherwise well it won't be 5. To get any audio from your TV, or Satelite Box, you need these items and ste
ps.
Make sure your TV or satelite box has 2 RCA's female plugs labeled (Output) to deli'ver the sound to another device *(from your Satelite or TV to the now dead 5. surround sound)? 2. Your computer must be on at ALL times to transmit (or play) the sound from your TV or satelite box. 3 you need a?Y?RCA to 3.5mm plug jack cable (they are at allMart or Bull'sEye stores for 2$. its a cable that has the 2 male RCA's 's white 's red at one end, the other end will have the classic headphone jack *(you can always use this cable to transmit any audio coming from any device such as MP3, CD, DVD, Laptop, TV, and many other devices to your 5. surround sound in the living room or the computer) 4. Plug the Y RCA in the input port in your Audigy2Zs sound card. Make sure the Mic, and AUX are on mute, and that the Line In volume is at 70% and your TV, Satelite Box audio is at 50%. If its too low volume watch out, you'll be controling about?4 volume settings *(the TV or Satelite Box, the Line-In, Master Volume on the sound card, and Speaker Volume) 5 Sit back and enjoy!

Similar Messages

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

    This message refers to the VIs found at this link:
    http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
    How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

    Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

  • How do i use MIB-2 for writing MIB for my application?

    I want to use the existing MIB-2 to write MIB variable for my application. The application is energy metering.So How do i use MIB-2 for writing MIBs for my application?
    Santosh Chavan
    IIT MADRAS.

    For others who do not know what an MIB is, here is link that shows some more information:
    http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/snmp.htm .   A quick Google of MIB did not turn up any useful information, but looking for SNMP quickly found this link. 
    It really turns out that I am not the person to help.
    It turns out that I am not the person to help, but I always want to know more as I may have a similar problem later.  I know from personal experience that it is easy to use a term commonly in a company or industry but have no one out side of that industry understand.  I was asking if that was such a term (hopefully with a little humor).  I'm sorry if my joke fell flat.
    I hope that you get an answer,
    Bob Young
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • How do i use appl id for my phone?

    how do i use appl id for my phone?

    Sign into the device with the Apple ID.
    Reading the User's Guide might also allow you to ask a more intelligent question and have a much better understanding of how the device works.

  • How do i use my number for imessaging instead of my email

    how do i use my number for imessage instead of email

    Hello there, qbullard.
    The following Knowledge Base article reviews the process for adding your number to iMessage:
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

    how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

    I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
    The way I do it, is I assign all my drum tracks to a buss, say buss 1.
    Then, on buss 2, I assign it's INPUT to buss 1.
    So buss 1 (all the drums) are feeding into buss 2 simultaneously.
    Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
    You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
    I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

  • How can I use jbo:InputSelect for a char type filed?

    How can I use <jbo:InputSelect for a char type filed?
    I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
    There is a problem:
    If I use (in the "DataEditComponent.jsp" file)
    <jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
    to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
    Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
    I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
    I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

    If I were in your shoes, here's how I would do it:
    <%-- Assuming you have dsRoom and dsResponsibility --%>
    <%-- Select is an HTML tag --%>
    <select name="ROOM" size="1">
    <% char roomID =""; // Init your character var
    // Open a rowsetIterator to get the records and add them to the LOV
    <jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
    <% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
    // add the value to the LOV
    %>
    <option value="<%=roomID%>"><%=roomID%></option>
    </jbo:RowsetIterate>
    </select>
    If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
    //Set the current record's char
    char curRecord = (char)rowEdit.getAttribute("ROOM");
    // inside the iterate:
    if (curRecord == roomID) {
    <option value="<%=roomID%>" selected><%=roomID%></option>
    } else {
    <option value="<%=roomID%>" ><%=roomID%></option>
    Hope that helps!

  • HT204053 Hello, I have two iphones but one Apple ID. How can I use localization apps for a dedicated device? Tx

    Hello, I have two iphones but one Apple ID. How can I use localization apps for a dedicated device? Tx

    On the iPad open Settings/iCloud and delete the account using the button at the bottom. Once deleted log in using the other account. For iTunes Stores use Settings/iTunes & Apps Stores, tapp on the Apple ID at the top then sign out. Once done sign in using the other account. Once you are happy with the changes plug your iPad into your computer to update the backup.

  • I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

    i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged  
    pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
    and i wnat to complete hardware exam of mac what should i do
    thanks
    vicckey

    GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
    If you are interested in becoming a certified Apple hardware technician, you can find information here:
    http://training.apple.com/certification/acmt
    Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
    I have no idea what "knowlaged" might be.
    Regards.

  • TS3988 It seams that i have another Apple ID, how can i use only one for everything?

    It seams that i have another Apple ID, how can i use only one for everything?

    http://support.apple.com/kb/HT5622?viewlocale=en_US
    -The specific point:
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.

  • How do I use trains late for facebook

    How do I use trains late with Facebook, have it in my apps, but can't seem to use with Facebook?

    Your best place for app specific support is the developer of that app. I'd check on the Trains Late web page or see if they have contact info for support.

  • How do I use itune music for creating photo DVDs with music in adobe element 10?

    How do I use/transfer itune music for DVDs with music in adobe elements premier? 

    On each computer:
    Open iTunes. Select Preferences from the iTunes menu and click on the Advanced icon in the toolbar. At the top you will see a box showing the path to your iTunes library. Click on the Change button, navigate to the location for the library on your external drive, select it and click on the Open button. Note this permanently changes the library's location on that computer. That means you cannot access your music unless the external drive is connected.
    If you don't want a permanent change, then press the OPTION key and hold it down while you launch iTunes. iTunes will then prompt you to select the library you wish to open for that session.

  • How do I use memory stick for pictures

    How do I use a memory stick for my pictures?  I put it in the side of computer?  I want to look at
    my pictures on it and save more on it?

    Open Finder, the stick will be in the left hand pane, click on it and what is on the stick will show up in the right hand pane. Double click on one of them and it should open in Preview or iPhoto.
    You can use iPhoto for this also and you can copy images from iPhoto onto the stick.
    I dont use iPhoto, I use Lightroom, and when I do something like this I use Finder.

Maybe you are looking for