How do I use my time capsule as wifi for my xbox one?

How does one setup a time capsule to use as a home network to allow Xbox one usage as well?

set up the time capsule with an iOS device, a Mac or a PC, and then connect the Xbox to the time capsule like with any other router. however, for some Xbox features, you'll need to do specific setting changes. see this thread: Apparently I need to open several ports on my Airport Extreme to be able to chat on Xbox One.

Similar Messages

  • How do I use my Time Capsule with hotel wired internet

    How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

    It may not be possible..
    If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
    Look up instructions on using ICS (internet connection sharing) in the Mac.
    eg for 10.6.8 http://support.apple.com/kb/PH6589
    eg http://support.apple.com/kb/PH10740
    Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • HT201945 How do I use my time capsule on an existing WIFI network?

    How do I use my Time Capsule on an existing WIFI network?

    Use an Ethernet cable to connect from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule and then use the setup "wizard" on your Mac to configure the Time Capsule.
    It will suggest that you set up the Time Capsule to create a new wireless network. If you don't want or need another wireless network, you can turn off the wireless function of the Time Capsule and use it as wired hard drive only.
    Leave the Ethernet cable connected at all times. If you need to locate the Time Capsule in a different area, you can put it anywhere that the Ethernet cable will reach up to about 330 feet or 100 meters.
    The only exception to using an Ethernet cable would be if your existing wireless network is provided by another Apple router. Then.....you would have the option to have the Time Capsule connect using wireless and extend the network, although using a wired connection would still be the better way to go in terms of performance.

  • How can I use my time capsule with windows7

    How can I use my time capsule with windows7?

    This is asked regularly.
    https://discussions.apple.com/message/10978060#10978060
    Look at the more like this. On the right column next to the post.
    Load airport utility for windows.. which will also load bonjour for windows.
    In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

  • How do i use my time capsule as a network to store files, etc.?

    How do i use my time capsule as a network to store files, etc.?

    There is no difference in setup..
    Only trouble.. be warned this is quite problematic. With Mavericks even more so.
    See Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Take particular note. The TC is not a NAS or file server.. it can be pressed into use as one.. but will suffer..
    1. Slow spin up of the disk and fast spin down. Causing streaming and library issues with itunes.
    2. iphoto is easily corrupted.. don't move it to a network drive at all.
    3. no backup.. the TC cannot back itself up.. it is designed as a backup target for Time Machine. but Time Machine cannot backup network drives.. and nor did apple build in a backup.. it was never needed. After all it is a backup.. not a file store.
    4. you cannot partition it. You will have issues with TM if you do store both data and TM backups on it.
    5. You can use USB drive plugged into the TC, and experience a new definition of pain and suffering.. well slow file transfer anyway.
    Good luck.

  • How do i use a time capsule as a shared drive and back it up to another time capsule using time machine ??

    how do i use a time capsule as a shared drive and back it up to another time capsule using time machine ??

    You cannot backup network drives with Time Machine.
    You can simply setup the TC in the network.. it is a shared drive.

  • How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    Is there a reason you can't connect your iPhone to the same Wi-Fi network as your iPad?

  • How do I use my Time Capsule to back up my wife's MacBook Pro running 10.4.

    I just installed a Time Capsule. I've extended the range with two Airport Expresses. I've connected my MacBook running 10.6.3 to the wireless network. I've connected my wife's MacBook Pro running 10.4.11 to it. I've connected my wife's 3G iPhone to it and my first gen iPhone to it and our Apple TV to it. All devices can connect to the internet. I've connected the Time Capsule to the printer and printed wirelessly from both computers.
    I've backed up my MacBook and seen that the Time Machine is backing up my MacBook as it should.
    How do use the Time Capsule to back up my wife's MacBook Pro running 10.4.11? I've tried connecting them via ethernet cable and via USB cable. In both cases the Time Capsule failed to show up as an external drive and wasn't seen by the 10.4.11 back up utility.
    How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)

    James Elliott1 wrote:
    How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)
    That really is your best option. Sooner or later, you're going to have a problem with the "other" data on your Time Capsule, since the backups of your Mac will, eventually, fill up all the available empty space. That will, of course, limit the space available for the other backups.
    There's a very cumbersome workaround in the blue box of #Q3 of the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.
    Another is to connect a USB drive to the Time Capsule, partition it if desired, and back up one Mac to it and the other to the TC's internal drive.

  • How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

    My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

    Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
    Click on the Wireless tab at the top of the page
    Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
    Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
    Then, you must power off your entire network...all devices....in any order that you want
    Wait a minute
    Start your modem/router first and let it run a minute
    Start the Time Capsule and let it run a minute
    Keep starting devices one at a time until everything is powered up
    If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
    Open System Preferences (gear icon) on the dock
    Open Time Machine
    Click Select Disk
    Click the Time Capsule to highlight it
    Click Use for Backup or, it might be Use Disk
    Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
    If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

  • How do I use my time capsule as a wifi extender and still use as a backup in Time Machine

    I purchased a new airport extreme and want to use my existing time capsule as a wifi extender in another part of the house.  How do I set this up so that I can still use the time capsule as my backup (time machine) hard drive?

    Hello BNOLTNER,
    Thanks for using Apple Support Communities.
    Please see the directions in the following article for configuring your extended network.  Your Time Capsule will still be seen on the network, and may still be used as a backup destination.
    Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
    http://support.apple.com/kb/HT4259
    Take care,
    Alex H.

  • How do I use my Time Capsule as an External HD?

    I want to use my Time Capsule as a wireless external hard drive that any computer on my network could access and save files to. How do I go about setting this up. Currently when I try to drag files to it I get an error message. Any help would be great appreciated. Thanks

    So I had my TC set up properly, but when I would try to drag and drop an excel file to it I got an error message saying that it couldn't complete the task due to an unexpected error and gave and error code of 8058. I tried opening the file and saving it to my TC and it worked. Since doing that I can now drag and drop files onto my TC...including that original file. Just thought I'd post this in case other people read this.

  • How do I use my Time Capsule for backup without making it my router?

    I've always used my Time Capsule as my internet router (paired with my Time Warner modem) and I've also used it to back up my computer.   I just got a new modem, it was a nightmare to set up, and it's supposed to have very fast internet.  It's a Time Warner modem / router.  In order to set this up and get a new wifi, I had to disconnect my Time Capsule.
    Now I would like to connect my time capsule again to back up my computer, but to avoid messing with the internet or changing it again (I may as well try the new one), I DON'T want to continue using my TC as a router.   how do I go about doing this?  Do I continue to have it connect to the modem via ethernet or do I just plug it into the power source and that's it?
    If someone could walk me through the process it would be so appreciated!

    Hi Alexandra,
    The article linked below details how to go about settings your Time Capsule up as a bridge, which effectively disables all routing functionality (NAT and DHCP services are disabled on the Time Capsule as they will be handled by your ISP's modem/router), and should allow you to utilize Time Machine without affecting your existing network.
    AirPort Utility 6.x: Set up a base station or AirPort Time Capsule as a bridge
    http://support.apple.com/kb/PH5104
    All my best,
    Allen

  • How do I use my time capsule as an external hard drive?

    I am trying to use my time capsule as an external hard drive but can't figure it out... can anyone help me out?

    1.  Run AirPort Utility
    2.  Click on your Time Capsule
    3.  Click Edit
    4.  Click on the Disks Tab
    5.  Click on Enable file sharing
    6.  Choose the way you want to control file sharing access, whether it is by the Time Capsule password, an independent disk password, or accounts for different users.
    7.  You should then be able to access your Time Capusle drive from Finder.

  • How can I use my Time Capsule as an external Hard Drive for my PC?  My PC can't find it.

    Hi, I just bought this Time Capsule for my home.  I've got the internet access for all my devices (Mac, iPad, PC, iPhone) and I've got the Mac backup working through Time Machine.  I'm supposed to be able to use the Time Capsule as an external drive for my PC, but I can't figure it out.  My PC doesn't recognize the Time Capsule as a Network Place.  I called AppleCare, but they don't have all the answers for "PC issues."  They tried to get me to Map a Network Drive, but my PC popped up a window asking for a Username and Password.  It looks like something similar to when I VPN into my company network from home.
    I'm using Windows XP Professional, Version 2002, Service Pack 3.
    Any help would be appreciated.
    Thanks!

    Download and install the airport utility for windows.. it isn't strictly necessary but the bonjour service makes life easier.
    The request for username and password is correct. Username is whatever you like.. but windows needs it.. so admin.. being the common router one.. password by default is public unless you changed it.
    Now to get the TC to work properly..
    1. The names should be SMB compliant.. by default they are wrong.. use short names, no spaces no special characters.. pure alphanumeric. That is for TC name and wireless names.
    2. Wireless passwords should also be same use WPA2 private.
    3. In the disk sharing page.. manual setup.. put in the windows workgroup name.. ie WORKGROUP.. this helps the discovery process.
    4. In the same area, turn on the guest account to read and write.. not necessary but helps with later versions of windows particularly.
    5. Access the drive by using the direct IP address. ie in Windows Explorer address bar, \\10.0.1.1 (or whatever IP the TC is at).

Maybe you are looking for

  • Safari quits unexpectedly when i open twitter, it does not happen with any other web site or application, can anyone help?

    safari quits unexpectedly when i open twitter, it does not happen with any other web site or application, can anyone help? Here is the crash report: Process:         Safari [302] Path:            /Applications/Safari.app/Contents/MacOS/Safari Identif

  • Macbook screen pixelates and fades to white and freezes

    Over the past week I have had a problem while watching movies online or playing games... The screen starts to pixelate then fades to white and freezes. At this point I can still hear whats going on but the screen is almost all white and frozen... Is

  • Is Asset Tracking module mandatory for Oracle Install Base implementation?

    In the Oracle Install Base implementation guide, it is mentioned that Asset Tracking (previously Enterprise Install Base) Module is mandatory. Our situation does not warrant to implement asset tracking. Do we need to get separate license for Asset tr

  • Coloured portion in XY graph

    Dear All, I am trying to build a vi which starts to find the average of data points. The starting point is specified with the no of points taken for the averaging. I like to have a coloured region - a line to be shown in the XY graph where the s

  • CA-42, Nokia 3120 and WIn 7 (or XP)

    My wife loves her "really simple" Nokia 3120 - it does everything she wants Unfortunately, we have just had to replace it (with another 3120!) and need to move ringtones from old to "new" phone I have a CA-42 cable, but no longer the install CD When