How do I use my WD Cloud Server with iTunes?

Hi,
I have a WD Cloud Server on which I have placed all my music. I have turned on HomeSharing, but I do not seem to be able to access music that is not in my iCloud. Also, I cannot change or create any new playlists. Any ideas?
Thanks

I thought that you could figure out the answer for yourself, but if you need more confirmation.....the choices/options that you need do not exist on an AirPort router.
Cisco or Netgear might be brands to look at.  Good luck in your quest.

Similar Messages

  • How do i use my own dhcp server with airport extreme

    I just bought an airport extreme and I'm trying to replace my linksys router and another access point.
    I have my own dhcp/dns server and I want to continue using it. So far, I was not able to find the way to use NAT without DHCP (like I'm doing now with my current setup).
    I want to give the device another chance before I return it to the store. Is there anything I can do?
    Thanks

    I thought that you could figure out the answer for yourself, but if you need more confirmation.....the choices/options that you need do not exist on an AirPort router.
    Cisco or Netgear might be brands to look at.  Good luck in your quest.

  • How do i use my own domain name with creative cloud?

    how do i use my own domain name with creative cloud?
    i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
    thanks!!
    Lori

    http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
    I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

  • How to use the same OC4j server with different port number

    How to use the same OC4j server with different port numbers..?
    I have to OC4J installed on my machine on different hard disk drives....
    I want to be able to run both the server simultaneously..?
    is it possible ..it yes then how..?
    for that i have changed the port number of one server...
    but when i am trying to start the other server with different port number..it says that JVM -Bind already...
    Is there any clues...?
    Nilesh G

    In the config directory:
    default-web-site.xml: Change the port the HTTP listener listens on
    jms.xml: Change the port the JMS service listens on
    rmi.xml: Change the port the ORMI listener listens on.
    Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
    Rob
    Oracle

  • How do I use my I cloud account to save all my data no my device? I purchase $ 100 dollars deal because my phone memory was almost full.

    How do I use my I cloud account to save all my data no my device? I purchase $ 100 dollars deal because my phone memory was almost full.

    If you're asking if there is a way to add memory to your device, there isn't.  iOS devices have a fixed capacity that can't be expanded by using expansion cards or other hardware solutions.
    If you're running out of capacity on your devices, the only solution is to store less on your phone.  You can import your photos and videos to your computer as explained here: http://support.apple.com/kb/HT4083, then delete it from your device.  If you still want some of the photos on your device, put them in a folder on your computer then select the folder on the Photos tab of your iTunes sync settings and sync your device.
    You can also sync only some of your music to your device rather than your entire library, or subscribe to iTunes Match and stream it from iCloud.  You can also not keep as many movies, tv shows and other media on your device.

  • How do I use a Creative Cloud license when I have limited Internet for months at a time?

    How do I use a Creative Cloud license when I have limited Internet for months at a time?  I proces a lot of photos in remote areas where an application that needs online access would be useless.

    Hi Freewill,
    Please see the Creative Cloud FAQ here.
    Do I need ongoing Internet access to use my Adobe® Creative Cloud™ desktop applications?
    No. Your Creative Cloud desktop applications (such as Adobe® Photoshop® and Illustrator®) are installed directly on your computer, so you won't need an ongoing Internet connection to use them on a daily basis.
    An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
    For annual members, you can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.
    Cheers,
    Michael

  • How can a child below 13 use a Creative Cloud ID with parental permission?

    How can a child below 13 use a Creative Cloud ID with parental permission?(I do not mean using parental account directly, if any other option is available)

    I suspect that the issue is that Adobe likely doesn't issue Adobe IDs to children under 13, because of COPPA.  Given the nature of Adobe's products, the potential legitimate userbase of under-13s is small, and the compliance costs could be very high.  Bear in mind that a kid under 13 can't legally sign up for a Facebook account, with or without parental permission, either, because FB doesn't want the liability for compliance if it knowingly signed up under-13-year-olds. 

  • How can I use the Creative Cloud without having a Credit Card? Why are there no other possibilities?

    How can I use the Creative Cloud without having a Credit Card? Why are there no other possibilities?

    Hi @DRB1961, 
    I do not think the Zeen will work if you no longer have the C510 printer. The printer is necessary to ensure the Zeen is up to date. The Zeen is simply not a standalone device, it is a component of the printer.   I can not say this with certainty that it will not work, so it is worth trying to reset the Zeen to finding out for sure.
    When you see this message, "must dock the Zeen to the printer to continue", can you access the settings using the 3rd icon above the touch screen? If so we can do a factory reset, if not there is no other way I can think of to bypass this message.
    I just tried a reset on a Zeen I have access to, after the initialization, it prompts me to attach the Zeen to the printer to continue with product setup. it appears my original speculation was correct. No, you can not use the Zeen without the printer.
    Clicking the thumbs up below helps show me that you are grateful of my efforts   If you have any additional questions, I am happy to help.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How do I connect to a terminal server with my mac book pro

    How do I connect to a terminal server with my mac book pro

    Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field.  If that does not work then use the IP address to connect.

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How do i use air sync to sync with my iTunes on my computer

    How do i use air sync to sync with my iTunes on my computer

    You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
    Use Microsoft SharePoint Workspace Mobile
    http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
    iPhone SharePoint Apps Shootout
    http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx 
    Comparing SharePoint iPhone Apps
    http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
    MCTS: Messaging | MCSE: S+M

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    iPod touch User Guide (For iOS 4.3 Software)

  • How Do I use my External Drive for my iTunes Library without adding anything to my Mac's HD?

    I have a new MBP and have transferred all of my music off my old pc (250+ gigs) to a Lacie 1TB thunderbolt external drive.  How do I use the external as my primary itunes library with out using any of my Mac's HD?  I'm new to mac so I have a few more questions...
    1. The initial question above
    2. will this work or will there be extra steps every time I disconnect and connect the external (other than ejecting)?
    3. Will I be able to access it remotely / home sharing?
    4.  Would this work with itunes match?
    Thanks All  !!!

    DevonC wrote:
    I haven't set up Time Machine yet because it wants me to completely format my external hard drive, and it seems to want to use it for TM backups exclusively?
    However, I would also like to use it to store stuff that I don't want to keep on my computer, eg tons of photos, videos, stuff from my sister's computer, etc.
    Is there a way to do Time Machine but also use the external hard drive for storage? I don't mind temporarily copying the photos etc that are on there to my computer while I format, so that's not the issue. I just don't want my EHD rendered completely useless to everything else.
    Thanks!!!
    There are several ways to do exactly this.
    If you partition the external drive, you can use one partition for TM and the other for anything else.
    Even if you do not partition the drive, you can safely store other data in folders on the drive. Just to not use the folder that TM creates for anything. And it's best not to put files directly on the drive, in my opinion, but use folders for storage.
    Just remember that whatever you put on the drive takes up room from TM and when the drive gets nearly full, TM will start automatically deleting older files from it's own folder.
    I have my Tiger clone on my external TM drive in a separate partition and everything works fine.

Maybe you are looking for

  • SharePoint Foundation 2013 Managed Account.

    Hi all, I have a doubt, I want to register a new managed account in SharePoint Foundation 2013, My question is do I need to know the password of active directory user account which I am going to add as the Managed account. is it that the password whi

  • ICloud seriously screwed me up & I'm not sure how to fix it

    Okay, so I upgrade to IOS5. I get hoodwinked into creating a new apple ID, much to my dismay. After restarting my iPhone, I don't want the new ID, so I try to log into Apple ID with my previous ID, however it won't accept my password and makes me res

  • Leopard + Snow Leopard compatibility

    I am thinking of installing snow Leopard on my macbook pro. I am successfully working (other than the few known bugs), with logic 9 songs alternating from my macbook pro and my older G5 (songs stored on an external lacie). Seeing that I can only inst

  • Can I use 3.0 themes in Keynote '09?

    Hello, I'd like to use 3.0 themes in the new Keynote version, is that possible? If so, where are the themes? Heloisa

  • Running a OpenScript test from OTM is not lauching the browser

    I'm trying to launch OpenScript test from OTM but it's not launching the browser. All it does in background, unable to see whats happening when running the test. Can anyone let me know what setting I need to correct in OTM to make the browser visible