How do I use outlook digital id's to read encrypted email?

I'm strugging with this one. I have an exchange account that makes use of digital ID's to encrypt email using MS Digifal ID's. Is there a location or feature on the iPhone4 where I can use the imported ID to let me read email that's been encrypted with s/mime on the iphone4?

OR... *sorry" is there a third party application that I can put on the iPhone4 to allow me to do this?

Similar Messages

  • Using a digital certificate to send an encrypted email.

    I want to send an e-mail through my i-pad using a digital certificate, that i have already configurated in my e-mail account. This e-mail i want to send also encrypted. Do i need to have a public certificate code from the person i´m sending the e-mail to? Like outlook express works?
    thanks for the answer in advance

    Hello,
    Your best option will be to use an encoder for feedback in your system. If you use an encoder then at the end of the move, the controller will compare your trajectory position with the position the encoder reads (the actual position) and make the necessary adjustments. Also, this is all handled transparently so you won't have to worry about any complicated programming issues.
    Regards,
    Andy Bell
    Applications Engineer
    National Instruments

  • I have to use outlook web access fr two different work emails on iad2. Difficult to send mails as keyboard freezes. Bluetooth keyboard eyes freezing too. Anything I can do? Neither keyboard freezes in any apps.

    I have to use outlook web access fr two different work emails on iad2. Difficult to send mails as keyboard freezes. Bluetooth keyboard eyes freezing too. Anything I can do? Neither keyboard freezes in any apps?

    I have to use outlook web access fr two different work emails on iad2. Difficult to send mails as keyboard freezes. Bluetooth keyboard eyes freezing too. Anything I can do? Neither keyboard freezes in any apps?

  • After I upgraded to ios6 , my iPad gmail was something wrong because it always hang and switch off the App automatically . It is very irritating . Please let me know how to solve this problem because I have to read my email everyday . Thanks .

    After I upgraded to ios6 , my iPad gmail was something wrong because it always hang and switch off the App automatically . It is very irritating . Please let me know how to solve this problem because I have to read my email everyday . Thanks .

    Double tap Home button, delete Mail from multitask-bar.
    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.

  • HT3748 since upgrading to Mountain Lion, my Mac Mail no longer works well w/exchange email; so, I have had to switch back to outlook. Now, how can I use outlook for mac's calendar and contacts with icloud?

    Since uprgading to Mountain Lion, my mac mail no longer works with my exchange email properly. I finally gave up and moved back to outlook for mac, but now my new issue is using outlook calendar and contacts with icloud; possible?

    Sorry but I'm really not to sure what I have. I'm not good with knowing my computer model. All I know is that its a MacBook running with Leopard. I got my computer last year so I suppose its fairly new. Is there a place on my computer where I can check to see what it is (sorry to be so dumb with my own mac)
    And everything else works fine. I love Safari. It's just my mail that doesn't work. Here's the message that pop up several times.
    "The MobileMe IMAP server “mail.mac.com” rejected the password for user “akcastaldo”
    Please re-enter your password, or cancel."
    The only problem here is, even though I enter my password it doesn't do anything. It makes that message go away for about 3-5 mins. After that it pops right back up. And I can't even go into my preference and change my email password. So I don't know what to do.

  • How do you get a digital dial indicator to read in labview?

    I have a digital dial indicator which I uses a USB conection.  the deviece says it is working in MAX but I can not get it to display any numbers in max.  I have also tried to set it up in a VI with a DAQ but the DAQ does not find the device.  Can anyone help?

    Richard @ GE wrote:
    Using hyperterminal I have to press a button on the cable connecting the insturment to the computer for it to record a value. 
    I have not written any code yet for labview.  I have only tried to figure out how to get LabView to see the device but have not been able to acomplish that. 
    By "record a value" I am interpreting this to mean that you are seeing text appear in HyperTerminal. In this case the reason why you are seeing "stuff" in HyperTerminal but not in MAX is that HyperTerminal is continuously running and spitting out whatever is on the serial port. The MAX test panels don't work that way. If you open the Example Finder and look at the Basic Serial Write and Read VI you will see that the read part of that VI checks to see how many bytes are on the serial port and reads that many. If you put this inside a loop then you will get an equivalent to what HyperTerminal does. 

  • My husband and I both have iPhones . How do I use one account for purchases and keep the email separate when using iCloud?

    My husband and I both have iPhones . How do I use one iTunes account to share music, photos and apps, and keep our email accounts separate since all data will use the iCloud function.

    You shouldn't be using the same account on phone iphones. Have him setup his own and make sure his iCloud is logged in with that one

  • How do I use the Certificate Assistant to set up secure email for clients

    I was at first thrilled to find the Certificate Assistant, and now I'm frustrated. I need to have secure, encrypted email for my psychotherapy clients. I thought that if I created my own certificate authority and then issued certificates to my clients, I would be fine. But I can't get this to work. I set up my own authority, but when I try to get a certificate (using a different email account) I can't get it to work. For example, I go to the website created on mac.com and click the "download an invitation" button and then click the download, which opens the Assistant. I fill out the form, but I get an error saying I haven't configured an email account. How do I "configure" an email account? I mean, I use this account all the time; what more configuration does it need?
    Second question. Will anybody with a Windows machine be able to use that webpage? Seems like it's a mac only program, so what good is it in the real world?
    I know I could try to do this with Thawte or whatever, but asking my clients to get trusted so I can use encryption is unreasonable. If not having my own authority (if I could get THAT to work) is there any other way? Are there any good things to read about this? With the federal HIPAA privacy requirements, there are lots of doctors wrestling with this question.

    If you are referring to your "iCloud account", then simply tap "settings / iCloud" - delete the account you are currently logged in with, and add the correct one.
    iCloud Set up - http://www.apple.com/ca/icloud/setup/.

  • How do i use my number for imessaging instead of my email

    how do i use my number for imessage instead of email

    Hello there, qbullard.
    The following Knowledge Base article reviews the process for adding your number to iMessage:
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • How do I use a protected document in Adobe Reader?

    I am trying to use a document that requires a user name and password in Adobe Reader on my tablet. The problem is that I have tried everything and nothing I do will allow me to enter this information. It says editing is not allowed with this protected document, but it is set up to allow editing so I can put in the info required to unlock the contents. I have attempted to search your database and all the answers I have tried have not worked. Please help! I am at a loss and I need this document unlocked. Thank you!

    Adobe Reader mobile products (Reader for iOS, Reader for Android, etc.) do not support commenting or form filling with secured (hence, encrypted) PDF documents.
    Please use the desktop version of Adobe Reader on your Windows or Mac computer to fill in the secured PDF form.  Sorry for the inconvenience.

  • PCI 6602:How can I use the digital lines of the board and in the same time to generate pulse train using a counter?

    Hello!
    My problem appeared when I tried to update my code from Traditional NI-DAQ Legacy to DAQmx.
    I am using 2 counters (counter 5 and counter 7)  from PCI-6602, to generate pulse train, and also the Digital I/O lines of the port 0 (the lines form 0 to 7). What I do in my application is that I am starting to generate the pulse train on the output of the 2 counters, and after that I am playing with the state of the digital lines.
    In traditional there was no problem using the counters and the digital lines in the same time, everything was going perfectly, but in DAQmx this is not possible.
    What happens: I start to generate pulse train on the output of the counters,  no errors encountered, but when I try to modify the state of one line of the digital port the generation of the pulse train is stopped. This is happening when I start the task associated to the digital port.
    My question is: it is possible to create a channel on the digital lines without altered the channels created for the counters?
    Another thing what I manage to see using the  "Measurement & Automation Explorer" and Test panels for PCI-6602, basically is the same thing, I generate pulse train on the output of the counter 7 and try to start a task on the digital line, but I get one error :
    "Error -200022 occurred at Test Panel
    Possible Reason(s):
    Measurements: Resource requested by this task has already been reserved by a different task.
    Device: Dev4
    Terminal: PFI8"
    Instead if I use the counter 0 or counter 1 to generate pulse train I don't encounter the same problem.
    Which resources are used by the counters 2 to 7 from the PCI-6602 board and the counters 0 and 1 do not use?
    Thank in advance for any replies!
    Ciprian
    Solved!
    Go to Solution.

    Hello Jordan, thank you for your reply.
    I am sorry but I can not see or run your example, I don't use LabView, I use Visual C++ for developing.
    Here is the code for generating the pulse train:
    GeneratePulseTrain(unsigned long ulCount1, unsigned long ulCount2)
        short nStatus = 0;
        nStatus = DAQmxCreateTask("",&m_taskHandle);
        nStatus = DAQmxCreateCOPulseChanTicks (m_taskHandle, "Dev4/count5", "", NULL, DAQmx_Val_Low, 0.0, ulCount1,ulCount2);
        if( bTriggerMode == true) // if hardware trigger is enabled
            nStatus = DAQmxSetTrigAttribute (m_taskHandle, DAQmx_ArmStartTrig_Type, DAQmx_Val_DigEdge);
            nStatus = DAQmxSetTrigAttribute (m_taskHandle, DAQmx_DigEdge_ArmStartTrig_Edge, DAQmx_Val_Rising);
            nStatus = DAQmxSetTrigAttribute (m_taskHandle, DAQmx_DigEdge_ArmStartTrig_Src,"Dev4/PFI17" );
        //set the internal timebase
        nStatus = DAQmxSetCOCtrTimebaseSrc(m_taskHandle,"Dev4/count5","20MHzTimeBase" );
        nStatus = DAQmxStartTask(m_taskHandle);
        return nStatus;
    And the code where I try to set the digital line:
    SetChannelState(short nState)
        short nStatus = 0;
        uInt8 wrtBuf0[1]={0};
        nStatus = DAQmxCreateTask("",&m_taskHandle);
        // Configure line as output 
        nStatus = DAQmxCreateDOChan (m_taskHandle, "Dev4/port0/line0", "", DAQmx_Val_ChanPerLine);
        nStatus = DAQmxStartTask(m_taskHandle);
        wrtBuf0[0] = nState;
        nStatus =DAQmxWriteDigitalLines (m_taskHandle, 1, 0, 0, DAQmx_Val_GroupByScanNumber , wrtBuf0, NULL, NULL);
        nStatus = DAQmxWaitUntilTaskDone(m_taskHandle,10);
        nStatus = DAQmxStopTask(m_taskHandle);
        nStatus = DAQmxClearTask(m_taskHandle);
        m_taskHandle = 0;
        return nStatus;      

  • How do I use a digital adapter to content from my iPad mini on to a TV?

    I have 32in Sony TV, an iPad Mini and a Lighting Digital AV Adapter.  I tried to get content from the iPad mini to my TV but the digital adapter only transferred the sound.  I used the adapter on an iPhone 5s, and it got both sound and video.  Why doesn't the Digital adapter work with the iPad mini?

    Thanks for your reply. 
    However, I am not talking about Apple TV.  I got the adapter to mirror material on my iPhone 5s to the Sony TV via the digital adapter, whether it was email or a movie, but it would not do the same with an iPad mini.  I am trying to find a way to mirror without Airplay. I use a Virtual Private Network for streaming some entertainment and other materials but sometimes the wifi transmission is uneven. I can get the material on the iPhone or iPad with no problem.  When I switch to Airplay, the transmission becomes unstable the picture lags or freezes.  Doesn't happen without Airplay.  So I bought a digital adapter, and it works fine but only for the VPN transmission on an iPhone 5s. Why does the iPhone 5s work with the digital adapter but the iPad mini does not? The digital adapter is an A1438.  I would like to get it to work with the iPad also.

  • How can i use a digital camera as webcam?

    the iSight camera *****. I have a 12mp canon digital camera, can i use that in lieu of iSight to use in iChat and Facetime?
    if so, what's the procedure? i have a macbookpro on snowleopard 10.6.8

    Hi,
    The External iSight camera has a 640 X 480 pixel picture as do the early internal ones.
    Later versions of the iSight camera have 1.3mp resolutions and the latest are HD.
    However iChat only sends a max size or 640 X 480 picture and that is dependent on your Processor and Internet Speed. (And to some extent that of your Buddies)
    Using a Stills camera was a web cam can present some problems.
    It is mainly about what input the computer accepts and what the camera has as output.
    I have an older Kodak DC4800
    In addition to the USB Output for transferring pics it has a RCA pin type socket that output TV signals which the camera software can change between NTSC and PAL.
    I then used a DV Converter to input that over FireWire to the computer.
    For iChat this had to be converted to DV as it only accepts DV or certain USB web cam formats that the Mac then converts for iChat (effectively it digitizes the pic).
    My camera did not take Video it just had the Ability to output what the camera saw - basically you could use a TV as a super sized Viewfinder.
    If the camera you have has FireWire and it can do video then you maybe in luck  (It will still depend if the Video format is DV (not mpeg, not HDV or any other format such as AVI)
    If the Video it may do can be sent of USB that will need to be USB 2.0
    Again the format will need to be the type that iChat uses (or the OS software converts).
    For most Stills cameras this is impossible.
    8:58 PM      Saturday; August 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How do I use my iPhone's hot spot to send email with Mail ?

    Hi,
    My land line is dead ... so no phone nor internet at home.  But I can use my iPhone'hot spot to get on the web from my iMac.  Great ... it works !
    Oups !   I cannot send email from my computer using my iPhone's hot spot with Mail.
    How do I do that ?
    Regards.
    Robert Lespérance

    Hi Templeton Peck,
    Thanks for droping in my thread ...
    Doesn't the fact that I can surf the web with my iPhone's hot spot and that I cannot use Mail normally has I normally do give you a clue what the problem could be ?
    What other information can I give you other than normally I can surf and send email with my regular ISP.  Now that my ISP is dead I am using my iPhone's hotspot to surf the web awaiting that my ISP's connoection returns. Surfing is OK but I cannot send emails with through Mail.
    When I want to send an email from my computer, I get a message asking me to select the the SMTP server.  Then I select my usual ISP server, but the message comes back telling me it does not work.
    Is there any other configuration to do ?

  • Hi, I am using USB 8476s to communicat​e to a slave unit in LIN network using LabVIEW7.1​. Can anyone tell me how i can send a header file plus 1 byte of data to the slave in a LIN network. or how do i use ldf file. i want to read responses from the slave

    Hi,   I am using USB 8476s to communicate to a slave unit in LIN network. Can anyone tell me how i can send a header frame plus 1 byte of data to the slave in a LIN network. or how do I communictae with slave using LabVIEW7.1.
    I want to read responses from the slave. When i tried with labview exapmle programs or even using MAX also, while doing some switching action in my slave, i am getting response as Device inactive with timestamp but there is no data format. 
    And I have Lin Description File. Can you suggest me how to use ldf file.
    I am at customer place and It would be great help from you if you can suggest me at the earliest. Thank you

    you may use the LDF Starter Kit to use LDF informations in your application
    http://joule.ni.com/nidu/cds/view/p/id/665/lang/en

Maybe you are looking for