How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
The way I do it, is I assign all my drum tracks to a buss, say buss 1.
Then, on buss 2, I assign it's INPUT to buss 1.
So buss 1 (all the drums) are feeding into buss 2 simultaneously.
Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

Similar Messages

How to record a drum track on logic pro

how to record a drum track on logic pro

• What midi interface is it? Do you have a current driver? If everything is alright, GB should say (in the Prefs) "1 midi device detected".
• Do you have the midi cables connected the right way? Connect the drum machine's midi out with the interface's midi in.

How much is the final prize for the software of logic pro 9 ?

hello how much is the final prize for the app logic pro ???

The price you pay does depend on where you live. In Australia, we pay $209.99 (equivalent to US$219.25). But the price will be somewhere close to US$200.

How can i write a vi in using parallel port for digital inputs

Dear all,
i am a beginner user of LabVIEW and i want to write a vi in using parallel port for digital I/O. After reading the article "Using the Parallel Port in LabVIEW
" and download the parallel.zip, i know how to write the vi for output, but i still don't know how to write the input one.i've try to use a Inport.vi to test, but nothing change when i set pin2-9 to high. (my computer:win2K & LabVIEW 6.1)
Can anybody teach me how to write it?
Can anyone write the vi for me too?
Thanks all!
p.s.i've already install the "accessHW.exe"

Are you using VISA or the accessHW VIs? You may need to goto the bios and set the parallel port to run in spp mode or standard mode. This is the simpliest configuration and where you should start.
As far as writing the VI goes, just copy the diagram out of the tutorial you mentioned.

HOW to enable oracle advance compression for EXIST partitioned table

Hi All,
I have to enable oracle advance compression for existing table which PARTITION BY RANGE then SUBPARTITION BY HASH.
ORacle version: 11.2.0.2.0
Please provide me any relevant doc or any exp.
Thanks in advance.

could not see any text for how to enable oracle advance compression for EXIST partitioned table.RTFM.
From the resource above:
How do I compress an existing table?
There are multiple options available to compress existing tables. For offline compression, one could use ALTER TABLE Table_Name MOVE COMPRESS statement. A compressed copy of an existing table can be created by using CREATE TABLE Table_Name COMPRESS FOR ALL OPERATIONS AS SELECT *. For online compression, Oracle’s online redefinition utility can be used. More details for online redefinition are available here.
"

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

This message refers to the VIs found at this link:
http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

How do i use MIB-2 for writing MIB for my application?

I want to use the existing MIB-2 to write MIB variable for my application. The application is energy metering.So How do i use MIB-2 for writing MIBs for my application?
Santosh Chavan
IIT MADRAS.

For others who do not know what an MIB is, here is link that shows some more information:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/snmp.htm . A quick Google of MIB did not turn up any useful information, but looking for SNMP quickly found this link.
It really turns out that I am not the person to help.
It turns out that I am not the person to help, but I always want to know more as I may have a similar problem later. I know from personal experience that it is easy to use a term commonly in a company or industry but have no one out side of that industry understand. I was asking if that was such a term (hopefully with a little humor). I'm sorry if my joke fell flat.
I hope that you get an answer,
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

How do i use appl id for my phone?

how do i use appl id for my phone?

Sign into the device with the Apple ID.
Reading the User's Guide might also allow you to ask a more intelligent question and have a much better understanding of how the device works.

How do i use my number for imessaging instead of my email

how do i use my number for imessage instead of email

Hello there, qbullard.
The following Knowledge Base article reviews the process for adding your number to iMessage:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

How can I use jbo:InputSelect for a char type filed?

How can I use <jbo:InputSelect for a char type filed?
I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
There is a problem:
If I use (in the "DataEditComponent.jsp" file)
<jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

If I were in your shoes, here's how I would do it:
<%-- Assuming you have dsRoom and dsResponsibility --%>
<%-- Select is an HTML tag --%>
<select name="ROOM" size="1">
<% char roomID =""; // Init your character var
// Open a rowsetIterator to get the records and add them to the LOV
<jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
<% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
// add the value to the LOV
%>
<option value="<%=roomID%>"><%=roomID%></option>
</jbo:RowsetIterate>
</select>
If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
//Set the current record's char
char curRecord = (char)rowEdit.getAttribute("ROOM");
// inside the iterate:
if (curRecord == roomID) {
<option value="<%=roomID%>" selected><%=roomID%></option>
} else {
<option value="<%=roomID%>" ><%=roomID%></option>
Hope that helps!

HT204053 Hello, I have two iphones but one Apple ID. How can I use localization apps for a dedicated device? Tx

Hello, I have two iphones but one Apple ID. How can I use localization apps for a dedicated device? Tx

On the iPad open Settings/iCloud and delete the account using the button at the bottom. Once deleted log in using the other account. For iTunes Stores use Settings/iTunes & Apps Stores, tapp on the Apple ID at the top then sign out. Once done sign in using the other account. Once you are happy with the changes plug your iPad into your computer to update the backup.

I use i-tunes for backing tracks with an acoustic band...how can I get a playlist to play one song at a time and not go to the next one until I manually select it?

I use i-tunes for backing tracks. How can I set up a play list to play only one song at a time and not go to the next one until I manually select it?
Thanks

Uncheck all the songs in the playlist. iTunes will then play one song and stop.
Regards.

I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckey

GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards.

How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

Similar Messages

Maybe you are looking for