How do I use pkgadd so I can load Solaris 10 patches

Hi everyone,
Quick question. I have a Solaris 10 8/7 on a X86 platfrom. It is a standalone system. I have downloaded the latest updates so I can patch my system can some one explain to me how to access and use use pkgadd?

Hey I got it working. At first I was using the Terminal mode and had some issues. I could have loaded through Terminal mode but figured why not just use the patch manager in smc? Loaded it through the smc patch object using the var volume. All is working well.
Take care

Similar Messages

  • How do I use multiple messages with CAN CREATE MESSAGE?

    I'm an old hand at DAQ, but new to CAN.
    I need to configure the CAN interface without using MAX or a DBC file directly (because i want the user to configure EVERYTHING in one place, and MAX doesn't handle my other channels).
    I can provide the message IDs, channel start bits, etc., etc., by importing a DBC file myself.
    So I'm looking at the CAN CREATE MESSAGE vi. I can make it work, using a single message, and a few channels on that message.
    But how do I add another message to that task? Or do I create another task to handle a different message?
    What's the difference between CAN CREATE MESSAGE and CAN CREATE MESSAGEex? I can't find any in the help docs.
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

    you can’t programmatically add messages/channels to an already existing task
    So I can't create a task with more than one message, and I can't add a message to an existing task.
    That sounds like I have to have a separate task for each message I want. That means separate READ operations at DAQ time. I hope the overhead doesn't cost too much (I'm doing a thousand other things at DAQ time).
    I have an RT card in the system I'm designing. It's only using about 5% of the CPU time (PID controlling an engine). Will NI-CAN stuff work on the RT? How do I physically connect it? Is CAN just RS-232 at fast baud rates, or are there more electrical differences?
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

  • When using numerous browsers,  i can load any site, except ebay!! What's with that??

    I have done all the normal corrections... such as repairing permissions and startup disk.  I have also cleared the cookies and other website data.  Ebay is the only website that I have tried that won't load... Safari, Chrome, Firefox, Camino and Opera... none can open to eBay website...  Other computers and my iphone have no problem using my wifi to load this site.  WTH????

    AVCHD:
    1080/60i @ 24, 17, 12, 5 Mbps
    (all video interpolated up from less than 1,440x1,080 pixels;
    Read more: http://reviews.cnet.com/digital-camcorders/jvc-everio-gz-hd500/4505-6500_7-33949 105.html#ixzz1N9w4EXt6
    G'Day Ian,
    This is what the camera shoots. The NTSC version anyway.
    Al

  • How do I disable firefox so I can load adobe flash?

    I just loaded Firefox. Now I am trying to view an email and I get the Message, "you can not view this email until you load Adobe Flash. When I try to download Adobe Flash I am told to "please disable Mozilla Firefox." How do I do that?

    Firefox button > Exit or File > Exit

  • My iMac hard drive died-how do I use Time Capsule to re-load new data to new Mac?

    My old system was a Mid-2007 iMac running Lion. I'd like to set up a Mac Mini with the data from the old iMac. What options do I have?

    use the migration assistant, which should be in the utilities folder of the mini.  follow the prompts, choosing the restore from TC backup.  If I recall correctly, it should ask you if you want the mini to inherit the backup from the imac. 

  • SMART FORMS: How are they used and how can they be configured/enhanced?

    Hi Experts,
    I would like to know how are the smart forms used in crm.I know that by using t-code SMARTFORMS we can view/edit standard smart forms . But I am confused about the fact that how are they used.If some one can list me the steps to be followed in simple language that would be of great help.
    Any pointers would also be appreciated.
    Regards,
    Aneesh

    Hi Aneesh,
      In CRm we use smartforms to send mail to Business partners based on the client requirement. This sending process will be defined using Actions. Through actions we will trigger the smartform and send to the concerned busines partner mail id.
    Hope this helps you.
    Regads,
    Lakshmi.Y

  • Multiple users, devices & Apple IDs in the house. Can we, and how would we, use Home Sharing?

    We have three users in the house, each with their own Apple ID, using multiple mac/PC devices.  Can we and how would we use Home Sharing to share music, apps, etc? 

    Do you have a computer. You can't share music or apps from one mobile device to another. To share photos you need to use photo stream shared albums.

  • When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event.  Now it shows only one photo at a time.  How do I get it back? Can you help?

    When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event.  Now it shows only one photo at a time.  How do I get it back? Can you help?

    On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
    Regards
    TD

  • I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?

    I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?  Thanks to you from the UnTechie

    The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
    You cannot reverse the upgrade.

  • How do we use if statement in labview?moreover can i use if statement inside for loop?

    how do we use if statement in labview?moreover can i use if statement inside for loop?

    The if statement in LabVIEW is the Case structure. You can find that on the Structures palette right next to the For Loop. If you're still on the same subject about terminating a for loop early, then what you do is enclose your functions inside the loop with a case statment and make one of the case's empty except for one or more constants that you might have to wire. Hopefully, the attached picture will explain what I mean. Also, as I mentioned in one of your other posts, I think this technique is not as good as using a while loop. The array in the attached example is the same size no matter what and you may have to handle stripping extra or invalid elements.
    Attachments:
    For_Loop_with_Case.jpg ‏21 KB

  • How do I use a font variation in a pages document. I no longer have the "viewer" -glyph option in special characters pane only new mbPro with Lion. I know the variation is available because I can see it in the font book. so now what I just want to be

    How do I use a font variation in a pages document? or other app for that matter? I no longer have the "viewer" - glyph option in the special characters pane (under edit  in toolbar). I know the varaition ia available because I can see it in my font book. I depended on that alot so I need to find a way to still use character and embellishments. I don't want to have to go back to my od computer (from2007) Please Help!

    I really don't understand.
    The menu item is available :
    Maybe, you didn't activate the tool :
    Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 23:10:17
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

    Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

    Here's the short-cut solution:
    Green Apple tracks are MIDI files (so to speak). If you drag one from the loop browser (Capitol C Orchestral hit, as you mentioned in this exable) directly into the arrange page it creates the MIDI file and the instrument to play it back on.
    HOWEVER.If you create and audio track first, THEN drag the green Apple loop onto that track, the loop will get "bounced" with the reverb in tact and you'll have the exact sound that you heard in the preview.
    Make sense?

  • How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

    How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

    If you want to listen to the sounds of your drum set, you should use an audio cable and connect it to the computer's line-in, then create a real instrument track.
    If you use a Midi/USB interface, you'll have to create a software instrument track and select one of GB's drumsets as the instrument. Hopefully your drumset's midi notes are mapped to the right sounds in GB.

  • I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

    I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

    If your iPhone is locked to a wireless provider, only that wireless provider
    can unlock it. Contact the wireless provider in Hong Kong to see if they
    offer unlocking and if you qualify.
    If your iPhone is locked to an AppleID that you do not know, return it for
    a refund as it is useless. Only the person whose AppleID was used for
    activation can remove the lock. There is no workaround for Activation Lock.
    If neither of the above is what you are facing, provide more detail so someone
    may offer a solution.

  • How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

    how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
    Iam new to coding. please help me.

    try the solution posted by kunu here and report back
    https://discussions.apple.com/thread/5105056?tstart=0

Maybe you are looking for