How do i use proper settings in mpeg streamclip with m2t files?

hello,
i have seen this discussion before but not sure what codec i need to transfer to for my type of files...
i shot a video on the **sony hvr z7u** using compact flash cards and the video was shot on 1080i 24 frames per second...all the files are currently in m2t...
i used mpeg streamclip and used the follow settings:
-apple motion jpeg a
-100 percent quality
-uncompressed sound
-frame size: 1920 x 1080 (unscaled)
-interlaced scaling was checked
although the files are workable in FCP the files themselves are gigantic...did i use the correct settings?
thanks very much,
steven

Steve
Download and install Sony's Compact Flash and Portable Recording Unit Log and Transfer plugin (BPE-SS-038D): http://support.sonybiz.net/software/detail.aspx?id=BPE-SS-038D&model=HVR-DR60
Andy

Similar Messages

How can I use my Dell photo 924 printer with my iMac

How can I use my Dell photo 924 printer with my iMac, I have tons of ink and don't want to buy a new printer right now.

People who need to SCAN & PRINT without a compatible driver from their manufacturer can use Apple's very basic "PRINT & SCAN" utility in System Preferences:
Click the Apple menu ( ), and then click System Preferences .
Click Print & Scan ( ).
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to modify scan settings such as output type.Figure 2: Example of the Show Details scanning screen
Change any settings as necessary, and then click Scan .
Hope this helps

How to get mpeg streamclip with mpeg 2 to work on Leopard and for fcp x?

How to get mpeg streamclip with mpeg 2 to work on macbook with Leopard and VOB files? Goal is to import into FCP X.
mpeg used to download effectively and for free with fcp 7 but apparently not the case with fcp x.

You need the MPEG-2 playback component. This is described in detail on the Squared5 web site.

How do I use Automator to duplicate a folder with graphics on my desktop and erase their Resource forks?

How do I use Automator to duplicate a folder with graphics on my desktop and erase their Resource forks?
I do not use command line and tried to use ZapResourceForksAMAub_1.2 which I downloadedand instaled the Zap Resource Forks.action. Next I tried to use their sample copy-zap-rsrc.workflow in Snow Leopardon my Mac Pro. The 3 different steps are displayed in Automator but there is no place to put in which folder (on my deskto) to copy, and remove the resource forks from the graphic files.
Can sombody please step me through this please please.
W.W.

Unfortunately, Back to My Mac only works across computers using the same iCloud account.

How can I use a vector image to stretch with the backgrounds in Muse master pages?

How can I use a vector image to stretch with the backgrounds in Muse master pages?

Maybe there's a bug. I think it's only showing it when it wants to because look:

How can I use my Ipod as an alarm with wake up to an internet radio?

How can I use my Ipod as an alarm with wake up to an internet radio?

You need to find an app that does bot since one app can effect another app (an alarm app can tell an internet radio app to start playing). There is Trance Radio with Alarm and Radio with Alarm Clock

I use Apple TV's screen saver with a file in my photo library. If I install newest update - will that change anything with my using this favorite feature? I have just under 4000 photos in that file. What is the total # of photos it can utilize?

I use Apple TV's screen saver with a file in my photo library. I believe it is first generation or second Apple TV - not the newest one.
If I install newest update - will that change anything with my using this, my favorite feature? I have just under 4000 photos in that file.
And, what is the total # of photos it can utilize? If I keep adding photos - is there a limit to the # it will utilize?

Thank you Alan and know you are right. I really can do all I need with my netbook and ereader and do not need the ipad. I think I just wanted something new and felt I may enjoy using it a lttle more than the netook. But it would be a waste just to buy one when I donlt acutally need it And, donl't think it is worth the extra money for me the get the 4g wireless capability since I doubt I would really need it often.
I may treat myself to the Ipad for the color, touchpad and fun to use but it is very expensive considering how little it will do for me no more than the things I want it for. It woudl be and expensive luxuray, I can do without. I actually need t learn how to use more of the function avaiable first. Maybe I should take up playing games and learning to take digital pictures so I can at least load them. If I could learn to do that and take a decent picture, I could start selling back all the "stuff" I have purchased on ebay. haha - I do have a nice doll collection, I would like to sell. I just do not have room for anything else. That was the primary purpose for the Kindle Ereader I bought and enjoy so much,
But, I will hold onto the thought for a while and see how it goes and what other comments I get, If I think I cannot live without it, then I will have to rethink which one to buy, I coud get the 32 g if I did not have to pay for the 4g wireless. And, if I knew I could get help to teach me how to use and enjoy all the functions, I would give it more serious consideration. My granddaugther got one for Christmas and that was what got me interested in it. I love the size of the screen and it had good color and was fast. She even had an application where she could write her notes and it would convert into typed words. That was a neat feature, If you could print it?
But thanks again for your comments and I will check later to see I get any other feedback.
Sunny:)

How could i parse string and link its model with my files in eclipse project?

How could i parse string and link its model with my files in eclipse project?, as i read that we dont have to use standalone mode while working with eclipse projects.
Example of what i want to do:
I have file1.dsl in my project which contains some statements but the declaration of these statements are not in another file, i need to put them only in my code

Hi Stefan,
I have eclipse project contains 2 files, file1.dsl and file2.dsl, you can see the contents of the files below.
file1.dsl contains some statements as shown below and file2.dsl contains the declarations of the variables. (like in C++ or Java we have declarations and usage)
At this step file1.dsl and file2.dsl will be parsed successfully without any errors.
Lets imagine that we will delete this project and will create another one and the new project will contain only file1.dsl (which contains the usage)
At this step this file (file1.dsl) will contains some errors after parsing it, because we are using variables without declarations.
So what i need is to parse the content of file2.dsl directly without adding this file to the project.
I need to add the content of file2.dsl directly as a string in the code and parse it. just like that ( "int a;int b;" )
And link file1.dsl with the model generated after parsing my string
file1.dsl
a++;
b++;
file2.dsl
int a;
int b;
Thanks

How to reset or change "what should firefox do with this file" option in Firefox 3.6.6

How to reset or change "what should firefox do with this file" in Firefox 3.6.6.
Accidentally I changed it to save file for .pdf files and now I want to reset it to default asking whether to open or save.
any help please
Thanks,
raj

Check the setting in Tools > Options > Applications
See "Reset Download Actions" and "File handling in Firefox 3 and SeaMonkey 2":
http://kb.mozillazine.org/File_types_and_download_actions

MPEG folder with .m2v files after build required?

When you build a project, I noticed the folder MPEG being created. does DSP create an MPEG folder with .m2v files?
Now, do you need this folder even after you BUILD the project. I don't understand why, the build folder is nearly 3GB as it is?

If there is a chance that you will have to make changes to your project, you should keep it.
Otherwise you can throw it out.

How do I use one account to share purchases with my family

I have an iPod, iPad, and my 2 kids each have an iPod. My oldest now has his own apple I'd so he can iMessage and FaceTime friends. How do I link his to the rest of ours so that we can still share our apps and music purchases? I had previously set up all of the devices under my I'd , since they weren't old enough to have their own. When we try to change the setting to automatic downloads, it states that "the device is already associated with an apple I'd", it then goes on to say that is i turn on the auto downloads with this new I'd that I cannot auto download or download past purchases with a different apple I'd for 90 days. What does this mean?. HELP this Mom, Please!

Just go to Settings>iTunes and App Stores and redownload the apps and music by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you share one computer also see:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

Using MPEG Streamclip to convert files for EX-1 sequence

I am trying to use MPEG Streamclip to convert mp4 and mpeg files in order to edit them in the same sequence as my EX-1 footage. What settings should I use on MPEG Streamclip that would be most appropriate for seamlessly editing the former MPEG and mp4 files with the EX-1 footage? Any thoughts on what sequence settings I should use? Right now I have it set as "XDCam Ex 1080p24 VBR" but every time I bring in files I have tried to convert using MPEG Streamclip, they need to render and I'm trying to avoid that. Thanks!

Thanks for the help

[EWS][Java] How can I use the Search Filter only mails with attachments?

Hey,
I'm trying to search a folder ( doesn't matter which ) for ONLY mails with attachments.
How can I use the search filter for that purpose?
Thanks!

You can drag the attachment collumn from settings and sort on that collumn
In the main Outlook window, on the View menu, point to
Current View, and then click Customize Current View.
Click Fields. In the Available fields list, click the field that you want to add, and then click
Add.
Come back and mark replies as answer if they help, and help others with the same problem. If this post is helpful please vote it as Helpful on the left side.

Best settings for MPEG Streamclip

Hi all,
Being forced to work off DVD source due to lack of options and want to ensure that I get the best possible results. Am using MPEG Streamclip and did a trial run to convert it into DV, converted the audio to 48khrz.
Picture was real time but audio needed rendering.
Can anyone advise me on the best possible settings for quality and realtime playback?
I'll be deliving in uncompressed quicktime and DVD.
Also, new to FCE and want to know where the best place to store the files I convert? Is this what the Sctatch disk is for?
Thanks in advance for your help, work on a weekend is never fun but you might just be able to help me get to the pub for a bit at least!
Nigel

Tom Wolsky wrote:
You converted to the wrong format. Do not convert to DV. Convert to QuickTime using DV PAL as the compressor. The frame rate is 25fps. The quality slider makes no difference.
You can only work in DV or Apple Intermediate Codec for HD in FCE. You cannot work in uncompressed formats so you're media has to be converted to DV.
I'm doing the same thing, but I'll be needing NTSC. I see in the Export to Quicktime dialog that there is no simple DV NTSC listed. The most promising-looking compression formats appear to be Apple DVCPRO50 - NTSC, Apple DV/DVCPRO - NTSC, Apple Intermediate Codec, Apple FCP Uncompressed 8(or 10)-bit 4:2:2.
Or is it better to use the Export to Other Formats dialog, and select QuickTime?
This is the first time I've used MPEG Streamclip (and I've only recently started using FCE 4), so I'm a little confused. What are the best settings to use for video that will be imported to FCE for NTSC?
Thanks.
-Gordon

How do i use proper settings in mpeg streamclip with m2t files?

Similar Messages

Maybe you are looking for