How do i use ranges and parameters together?
Plz help me...
I have a selection screen with about 8 parameters out of which two are mandatory, i.e. a flag and the date of creation. What I need to do is delete certain entries from a database table based on the parameters input by the user. Now the problem is when i am using the delete statement using where statement..
delete from zinbd_delv where vbeln = vbeln and
posnr = posnr and
lfimg = lfimg and
lfdat = lfdat and
created = created and
status = status.
But suppose the user enters data in only the two mandatory fields and say status = 'X' and created = 'XX/XX/XXXX'. In that case it should delete all the entries from the table where status = X and creation date as specified but since it will find the other parameters as blank it will fail. Can we use range table for this...plz tell me how to do it.
i think if you are using parameters then you have to enter the value in that.
or
select-options : sop for mara-matnr no intervals no-extension.
for single entry.
data : itab like zinbd_delv occurs 0 with header line.
select * from zinbd_delv ito table itab where vbeln in vbeln and
posnr in posnr and
lfimg in lfimg and
lfdat in lfdat and
created in created and
status in status.
delete zinbd_delv from table itab.
commit work.
regards
shiba dutta
Similar Messages
-
How do I use MenuBarFilter and MagicMenu together?
I have MenuBarFilter (http://eece.github.com/MenuBarFilter/) and MagicMenu (http://www.cynosurex.com/Software/MagicMenu/), and they seem unable to work together. Sometimes, the bar will be clack, or clear with unaccesibillity, or MagicMenu will work without MenuBar Filter. Any help is appreciated. On a related note, Spotlight and third-party applications are unclickable in the menu bar when using MenuBarFilter. Also, how can i remove the smcfancontrol icon from the menu bar? Thanks!
Message was edited by: VemirTry command dragging the smcfancontrol icon out of the menu bar.
Don't run MenuBarFilter if it is causing so much trouble and conflicting with MagicMenu. -
How can i use events and parameters in portal 9.0.2 ?
I try to use an search portlet and a report portlet displayd at the same page. If i submit a search the list report portlet should give the correct output. How must i set up the event in the search portlet?
Hi,
The wwsto_api_session is available in 902. It has not been removed. Try granting it to the user.
Thanks,
Sharmila -
Using Concat and Distinct together
hi
I am using the query below and I am getting 'missing expression' error. How do use Distinct and concat together?
SELECT 'SELECT ' || DISTINCT COLUMN || ' FROM DUAL UNION ALL '
FROM TABLE;Hi,
SeshuGiri wrote:
hi
I am using the query below and I am getting 'missing expression' error. How do use Distinct and concat together?
SELECT 'SELECT ' || DISTINCT COLUMN || ' FROM DUAL UNION ALL '
FROM TABLE;Whenever you have a problem, please post CREATE TABLE and INSERT statments for a little sample data, and the results you want from that data.
The example you posted has so many mistakes, it's hard to know what you're trying to do.
COLUMN, DISTINCT and TABLE are all Oracle keywords, and shouldn't be used for actual columnor table names, and using them for aliases is just asking for trouble.
When using SELECT DISTINCT, the keyword DISTINCT must come immediately after SELECT.
If you want to assign an alias to a column, it must be at the very end of the expression that defines the column. You can't assign an alias to part of an expression. If you want to do that, use a sub-query.
Here's a query that uses both SELECT DISTINCT and ||:
SELECT DISTINCT
job || deptno AS jd
FROM scott.emp;Edited by: Frank Kulash on May 13, 2011 2:52 PM -
How do I use Qt and OpenGL with Visual Studio
Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
Embedded firmware design(C and Assembly).
The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
Thanks
AlexandrosHi ClassicalGuitar,
The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
How can I use OmniPortlet and Web Clipping Portlet?
How can I use OmniPortlet and Web Clipping Portlet?
You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
o Building Portlets with OmniPortlet
o Building Content-Based Portlets with Web Clipping
Peter -
HT2534 how do i use itunes and the app store without any credit card or gift card?
i just got my iphone and i used to use itunes all the time before when downloading all songs were completly free, how do i use itunes and the app store to find free stuff to download without having to add a credit card or gift card with my account?
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/ -
How can I use excel and word on the IPAD2
How can I use excel and word documents on my Ipad 2
There are apps such as Documents To Go which support reading/editting/creating those sorts of documents :
standard version - http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
premium version - http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8 -
How can I use undo and redo with run time menu?
Hi..I try to built my own menu for graphic programming. How can I use undo and redo in labview with run time menu?
filozof-
During runtime, by default, LabVIEW has undo/redo data changes under the edit menu. This will undo/redo changes made to controls during runtime. If you want a more extensive undo/redo (custom for your application), you are going to have to do quite a few things
1) Create a custom runtime menu (Edit>>RunTime Menu) and place your own undo/redo controls on it
2) Keep an action history in your program
3) Catch the Shortcut menu event for your custom undo/redo controls
4) Reverse the last action in your histroy when you catch the event
This method would allow you undo entire operations (like resize, move, or whatever kind of functionality you are building into your application) unstead of just undoing data changes.
Xaq -
hi all ,
can we use projection and conjunction together??
i want to execute a query like this..
select column_1 , column_2 from table_name where column_1 like '%a' ;hi ian
you could also try verifying if the jar libraries containing your Document and Paragraph classes are defined in your class path OR if you are using an IDE, did you include that under your LIbraries?
The previous suggestion below also is a stop-gap to the library inclusion problem.
Hope that helps -
Use bottom and protect together
Hi all,
May I know the that possible to use BOTTOM and PROTECT together with few lines of text inbetween?
Eg:
BOTTOM
PROTECT
texttexttext
texttexttext
texttexttext
ENDPROTECT
ENDBOTTOM
or
PROTECT
BOTTOM
texttexttext
texttexttext
texttexttext
ENDBOTTOM
ENDPROTECT
Above code dont work for me. Please advice thank!!!Hi Kek,
Refer this link,
[Bottom..Endbottom|http://help.sap.com/saphelp_nw70/helpdata/en/d6/0db4a9494511d182b70000e829fbfe/content.htm]
Regards,
Sravanthi -
Using Airport And Ethernet Together
Having read Christopher Breen's solution to using Airport and Ethernet together,
http://www.macworld.com/weblogs/mac911/2006/10/airportswitch/index.php
I am still wondering if this can apply to my situation. I have an Airport Exteme BS distributing the wireless signal on it's own node. Nothing is physically connected to the BS except an ethernet cable running to a hub which is connected to the cable modem. While my ISP service isn't supplying service faster than Airport will manage, no problem...but, I would like to have the advantage ethernet networking between my machines for all the advantages that ethernet speed can bring to that situation.
My connection to the internet is from WAN from the cable modem. I have an ethernet connection from the BS that I can run a cable back to say, an iBook. Will this work? I want wireless internet, but ethernet for machine to machine networking.
JAL
iBook G3/500 G4/Dual 450 Mac OS X (10.4)
iBook G3/500 G4/Dual 450 Mac OS X (10.4)Helpful response, but I am uncertain this is what I am after. First, the hub is at the other end of the house, inconvenient to run a cable to it in this way. Presently, "Distribute IP Addresses" is turned off. This is way it had to be set since the AEBS is on a separate node. I just wonder why I can't run a cable from the AEBS LAN port back to the iBook. Looking for best possible speed when networking from my studio G4 while keeping the wireless internet setting.
Any reason making the config the way I am imagining will not work? -
Why and how do we use CHAIN and ENDCHAIN
Why and how do we use CHAIN and ENDCHAIN
Hi,
To ensure that one or more PAI modules are only called when several screen fields meet a particular condition, you must combine the calls in the flow logic to form a processing chain. You define processing chains as follows:
CHAIN.
ENDCHAIN.
All flow logic statements between CHAIN and ENDCHAIN belong to a processing chain. The fields in the various FIELD statements are combined, and can be used in shared conditions.
CHAIN.
FIELD: <f1>, <f 2>,...
MODULE <mod1> ON CHAIN-INPUT|CHAIN-REQUEST.
FIELD: <g1>, <g 2>,...
MODULE <mod2> ON CHAIN-INPUT|CHAIN-REQUEST.
ENDCHAIN.
The additions ON CHAIN-INPUT and ON CHAIN-REQUEST work like the additions ON INPUT and ON REQUEST that you use for individual fields. The exception is that the module is called whenever at least one of the fields listed in a preceding FIELD statement within the chain meets the condition. So <mod1> is called when one of the fields <fi> meets the condition. <mod2> is called when one of the fields <f i> or <g i> meets the condition.
Within a processing chain, you can combine individual FIELD statements with a MODULE statement to set a condition for a single field within the chain:
CHAIN.
FIELD: <f1>, <f 2>,...
FIELD <f> MODULE <mod1> ON INPUT|REQUEST|*-INPUT
|CHAIN-INPUT|CHAIN-REQUEST.
MODULE <mod2> ON CHAIN-INPUT|CHAIN-REQUEST.
ENDCHAIN.
The module <mod1> is called when screen field <f> meets the specified condition for individual fields. <mod2> is called when one of the fields <fi> or <f> meets the condition. If you use the addition ON CHAIN-INPUT or ON CHAIN-REQUEST with FIELD <f>, the condition also applies to the entire chain and module <mod1> and <mod2> are both called.
In cases where you apply conditions to various combinations of screen fields, it is worth setting up a separate processing chain for each combination and calling different modules from within it.
Regards,
Ferry Lianto -
I want to use ps and illustrator together, but I just bought the photoshop membership, could I upgrade my membership?
You may upgrade to the entire plan, or just add an individual program subscription
Upgrade single to all Cloud http://forums.adobe.com/thread/1235382
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
-what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
-http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html -
I have lost all of my previously created keynote templates now that I have upgraded to yosemite. How can I use Keynotes and pages etc on my computer and not on the cloud.
Welcome to Apple Support Communities
All iWork apps allow you to save your documents on your computer. You will be able to choose the destination when you want to save a document.
You can also disable iCloud for some apps. To do that, go to System Preferences -> iCloud, press "Options" next to "iCloud Drive" and disable the apps you want to.
If you have lost your old documents, you should have a backup that you made before upgrading to OS X Yosemite, so you only have to restore it.
Maybe you are looking for
-
Application Crashes Every time I Click the Path dropdown in the save....
Here we go..... Every time I want to save in ANY appllication to a mounted server and click the path drop down in the save dialouge box my application crashes. I can save my files fine in column view but if I'm in list view my save dialouge box doesn
-
Hello All, I have been trying to configure workflow for use in PCR forms in MSS. I think I have already configured workflow, for the most part, but I am getting errors in the form of emails after initiating PCRs. For a PCR without approval, I am gett
-
hi in thirdparty order the goods are sent by vendor to customer, then how the company knows it reached, bcoz comp has to bill the customer. plz give clear process for third party order. thanks sai.
-
Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. b
-
Flash slideshow not displaying when uploaded!?
I have created a website in Dreamweaver CS3 which works fine when previewed in the browser from the local files. However when i upload the site and then view the site, the flash elements do not work. i cannot see the flash slideshow. The website is: