How do I use snapshot tool on Surface 2 (RT)

I have begun to use my Surface 2 (RT) to put together my powerpoint presentations for work. I am constantly using PDF files and using adobe snapshot tool to cut and paste pictures and charts from the PDF files. On the surface, the only adobe version is the Reader Plus. I have not figured out a way to use the snapshot tool and there is likely not one. I am hoping this will be added in the future. If anyone knows a work around then please let me know.
Thanks in advance.

Similar Messages

How do I use "snapshot"?

How do I use, "snapshot"? I've highlighted a portion of an online teacher's edition book and clickedon snapshot. Where did my pic. go?

see > OS X Mountain Lion: Shortcuts for taking pictures of the screen
or > How to Take a Screenshot in Mac OS X (with screenshots)

How can I use Pro Tools with Fire Wire interface and Fire Wire external HD

If Mac Book Pro has only one Fire Wire jack and I want to use Pro Tools with an M Audio 1814 Firewire interface and an external Fire Wire HD how do I get around the fact that the Mac Book Pro has only one fire wire jack?
Pro Tools says that they DO NOT recommend using USB 2 Hard Drives as recording drives.
If I plug my External HD into the back of the 1814 it is way too slow to use, plus, I don't know why, Pro Tools is telling me that my External HD is "not a valid audio volume". It is a MAC OS Extended (Journaled) external Firewire HD (G-TECH G-DRIVE)
Stuck...
Message was edited by: Mezcla

You could consider getting a firewire hub or get an expresscard 34 adapter with a firewire port.
I personally use a Belkin Expresscard adapter that gives me an extra firewire port as well as two extra USB 2.0 ports.
Good luck.

How can i use gradient tool in Illustrator

Hello,
I am trying to use gradient tool in illustrator.
My image is active but how can i start using gradient tool.
I clicked the tool and tried to drag with my mouse but, i can not activate the tool itself.
Can any one help me, I am using CS4 extended with Mac.
Thank you very much.
Steve

First in order to use the gradient tool you must have a gradient fill applied to an object not an raster image it can be a vector illustration..
Select the object or objects or groups of objects
Now click on the gradient bar in the Gradient Panel while the object(s) are still selected that will fill the object with the default gradient.
You can also use a gradient swatch in the Swatches panel, you can make a gradient swatch as well.
Now your object(s) is filled with the default gradient fill.
Now in the tool panel select the gradient tool this will allow you to control the way the gradient is oriented and applied to the object.
Now you can change the colors and add colors to you gradient by clicking on the color markers below the gradient bar which will bring up the color or swatches panels.
Now finally and this is the most important factor to consider you have to purchase a book and or tutorials and the book that will probably do you the most good at this stage is Mordy Golding's Real World Illustrator CS 4 this you shoud do before you go any further. Honest.

How do I use snapshot or copy and paste an image in Adobe reader with windows 8?

Two things:1) how do I copy and paste images from a PDF into an email? It will not let me do it anymore. Also, how do I save a PDF document with all it's content? Now when I save a proof part of the content is not there when opened in CS6.

Check the document properties; is copying allowed?

To know How to Use shp2sdo tool

Hi
I want to Insert some shape files into my databse.
I Have shp2sdo tool.
I didn't Understand how to insert using that tool.
I am Very new to Oracle Spatial.
Can any one please help me
Please tell me in detail
Now am using Oracle 9i.
Thank you In Advance
San

San,
Take a look at
How shape files loaded into DB
Ivan

Access Snapshot tool in VB

I have few questions.
1st. Is there a program that can copy a pdf and paste it to document, that is automated, I know the snapshot tool exists and I can use that but I have roughly 3000 pdfs with 40 to 100 pages each I need to copy to add to my reports.
2nd. If a program doesn't exist then how do I access the Snapshot tool so I can copy the page and paste it into word? I managed to open both the word doc and pdf, but I can't figure out how to access the snapshot tool.
Thanks

If you had Acrobat you could extract all the pages from each of the files into single page files. If you had a decent DTP program for creating your report, then you could import each page as a separate file with no loss of fidelity. Word on the Mac supports pdf files as graphics, older versions of Word on Windows did not. I am unsure if the latest and greatest version of Word allows the import of pdfs as graphics.
I would not suggest using the snapshot tool since the quality of the graphic would be greatly reduced. If you owned Acrobat you could export the pdf file as a graphic (tiff, png, or jpg) and import those files into Word for Windows, but again the quality of the images would be reduced.

How do I use ExportPDF?

I just subscribed to your service to convert a PDF document to Word. How do I use this tool to convert my PDF document?

Hi Ron,
Please see Getting Started with ExportPDF | Adobe Community - Adobe Forums.
That document should tell you what you need to know to get up and running. But please don't hesitate to ask if you have additional questions.
Best,
Sara

Snapshot tool in Adober reader

I have copied a few pictures using snapshot tools from adobe reader and pasted in word. I sent the file to a friend using windows but he cant see the pictures. Apparently the pictures are not pasting as jpeg. Can someone help me rectifying this. I need to send him the pictures for a class project.

I've never worked with adobe reader so I don't know what exact format you pasted, and if the following might work or not. Try copy the image, then open preview, go to File > New from clipboard. If this works, then you can save it as any format preview supports (e.g. jpg). If that menu is grey-ed out, then preview doesn't recognize it... Maybe you can try use cmd-shift-4 to grab a screenshot instead.

Snapshot tool problem

I downloaded an ebook, using Adobe Reader (version 7.0.9) to read. I want to copy and paste some quotes, (claims I can using snapshot tool). I notice the snapshot tool in the toolbar but it is not available (not bark, it's faded but visible). I can't click on it but everything (under Help) says I should be able to.
I'm using Mac OS 10.3.9
Adobe Reader 7.0.9

>everything (under Help) says I should be able to.
Unless of course the the creator of the ebook has added security that prevents copy/pasting.
Check File>Document Properties>Security.

Undo Snapshot Tool

How do I undo Snapshot Tool selection? It repeats my last choice.

Thank you for the reply, unfortunately, I don't see this as an option, is there a preferences setting in Adobe or in a printer setup that would have to be enabled to get this selection? In the Page Handling, Page Scaling section, my only choices are, None, Fit to Printable Area and Shrink to Printable Area. Am I looking in the correct settings? Also note, I did download the latest Acrobat Reader this morning Ver 9.

When I use the "snapshot tool" some images are very light. how can I adjust the brightness....

I have windows 7 and Acrobat X Pro.
When I use the snapshot tool I cannot figure out how to adjust the brightness on that image? On my old computer a picture tollbar would pop up. A lot of images are very light and I need to darken them.

My not be much you can do. However, I would just clip them into my favorite image tool (in my case IrfanView) and adjust there.

I want to know more about the Sanapshot tool. What is its purpose? how do I use it?

I want to know more about the Sanapshot tool. What is its purpose? how do I use it? I have searched Firefox Help, but did not find a clear answer.

That is not part of Firefox. It is either an add-on for Firefox which you installed, or it is a separate program you have.
Also, is '''Sanapshot tool''' the correct name? Or did you mean '''''Snapshot'''''?

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I use the versionning tool to make a coherent solution to export

how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
I want to know proper steps to Import/export objects.
while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
required ur suggestion
Palash Chatterjee

kelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

How do I use snapshot tool on Surface 2 (RT)

Similar Messages

Maybe you are looking for