How do I use the filter to automatically print email and .pdf, .xls, .doc attachments to my default network printer and to other network printers

I receive sales orders by email. I want to filter some to print on my default network printer and others to print on another network printer. The email body must print as well as txt, .pdf, .xls, .doc attachments.

You can filter messages to file them to a certain folder, but I don't think you can have Thunderbird to automatically print them.

Similar Messages

How can I use the templates in iPhoto to email my photos if I don't have a mobileMe account?

I have upgraded to iLife11 and want to use the cool templates to email photos. I don't have a mobileme account. It doesn't appear that I can Use the templates. Am I doing something wrong?

What do you mean by the AOL screen? Is AOL your ISP? If it is popping up to connect you to the internet that might be what is preventing you from composing an email. It also could be that AOL was set up as your default email client. Do you use AOL as an ISP/Email client?
In Mac OS X Lion (I can't vouch for any other version of Mac OS) to change your default mail viewer/client open up apple's mail app. Go to file->settings Under the general tab it's the top choice if it is set to AOL, you might want to switch it so you can get it to come up with the email you actually use. Also if you do use AOL, they should have a section in their help about setting up "pop3" email, or how to use AOL mail in outlook. Now the steps might not be the same as far as what menu choices you have to make, but what you're gonna get out of that section is incomming/out going server's and anything else like ports and etc. Apple's mail app needs all that same information.

Where to locate and how to use the filter thershould to binarized image

Good morning friends. I am using
Labview with VDM and let me know where to locate and how to use the
filter thershould. Also that parameters used to binarized image captured
via webcam and display it in black and white.
Thank you very
much.

Is the image that you are getting a RGB one? Use color plane extraction and then use a binary threshold to convert it into a binary image. You can also directly use a color threshold and convert a rgb (color) image to a binary image.

How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

Did you check the help page for Correct Camera Distortion and Process multiple file
Correct Camera Distortion: http://helpx.adobe.com/photoshop-elements/using/retouching-correcting.html#main-pars_headi ng_5
Process multiple files: http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f89cffc612e28adab65-7 fff.html#WS287f927bd30d4b1f89cffc612e28adab65-7ff6

[EWS][Java] How can I use the Search Filter only mails with attachments?

Hey,
I'm trying to search a folder ( doesn't matter which ) for ONLY mails with attachments.
How can I use the search filter for that purpose?
Thanks!

You can drag the attachment collumn from settings and sort on that collumn
In the main Outlook window, on the View menu, point to
Current View, and then click Customize Current View.
Click Fields. In the Available fields list, click the field that you want to add, and then click
Add.
Come back and mark replies as answer if they help, and help others with the same problem. If this post is helpful please vote it as Helpful on the left side.

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How do I use the french version of pages?

I bought pages from the app store. I was downloaded in english. how do i use the french version?

Apologizes to English users but it seems that the question was posted from France.
Bonjour
Pages s'adapte automatiquement à la langue qui se trouve en première position dans la liste disponible dans la Préférence Système "Langue et texte"
Avec la configuration ci-dessus, Pages fonctionne en Français.
Je vous remercie car votre question m'a permis de remarquer que j'ai oublié de supprimer quelques langues installées dans le seul but de répondre à une question posée récemment dans un forum.
Yvan KOENIG (VALLAURIS, France) samedi 5 novembre 2011 17:39:15
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

I downloaded the new Pages and Numbers through my app store but when I open my old documents, it still tells me my 30 day trial is over. How do I get the computer to automatically recognize the new applications?

More information: I have a 3 year old MacBook and had been using "Microsoft for Mac" until last week when I took my MacBook in for some upgrades- including the operating system Lion. I have been unable to use the Word, Excel, etc. programs because they are not supported on the new operating system... and I already used my 30 day trial of iWork when we first purchased the computer. I decided to buy Pages and Numbers through the App Store icon. When I open the Pages and Numbers under my Applications, I can get them to work. However, when I open old documents saved on my computer, they go into the 'old' iWork messages of that my trial has expired. How do I get the computer to automatically recognize that I've purchased Pages and Numbers?

You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

How do I make the plugin run automatically when a photo is imported?

I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
How do I make the plugin run automatically when a photo is imported?
Thanks for your help!
Regards,
Prosenjit

psaha84 wrote:
What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
psaha84 wrote:
How do I save the custom metadata with the image file?
Lightroom 5 has the limitation, plugin cannot link the custom metadata fields to XMP file or save them with image file.
So, is there any alternative way to save the custom metadata?
Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
Good luck,
Rob

"Using the Filter HUD to Search for Referenced Files" (and "Locate Referenced Files")

I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do.
I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this.
Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at?
Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection in the left hand pane when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run either of these commands?
Thanks for any help in my getting this working better for me.

hotwheels 22 wrote:
I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do. 1
I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this. 2
Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at? 3
Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection {4} in the left hand pane {5} when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run {6} either of these commands? 7
Thanks for any help in my getting this working better for me.
1. Just copy and paste the URL from the on-line User Manual. Very helpful. Are you on this page?
2. From the above-linked page:
Show the Filter HUD by doing one of the following:
Choose Edit > Find (or press Command-F).
Click the Filter HUD button beside the search field in the Browser.
The instructions specify ONE of the following. Your question indicates to me that you are trying to do both.
3. The User Manual has used the wrong term here. It should say "Choose 'File Status' from the 'Add RULE' pop-up menu."
4. The command -- like all commands? -- works on the currently selected Images. On the same page in the User Manual it says:
You can select a group of images in the Browser and Aperture can show a list of the referenced images within the selection, including information about where the masters are located. {Emphasis mine.}
5. The Aperture workspace is highly configurable. I don't know what you mean by "the left-hand pane". Of what?
6. Yes. Of course it matters. At some point in the 80's when the GUI became standard computers standardized on the "Noun→Verb" syntax: Select object(s), select command(s).
7. Not sure what the second command to which your refer is.

How do i verify the filter setting set in SCXI 1102b module

How do i verfiy the filter setting set in SCXI 1102b module prorammatically per channel
Suresh Thangappan

Hello Suresh,
Thank you for contacting National Instruments.
If you are using NI-DAQmx, you can use a channel property node to retrieve the cutoff frequency of your input filter. Please see the attached screen shot for details.
In Traditional DAQ, use the AI Parameter.vi located under NI Measurements >> Data Acquisition >> Analog Input >> Advanced Analog Input >> AI Parameter. See the screenshot below for details.
Let me know if you have any further questions.
Sincerely,
Sean C.
Applications Engineer
National Instruments
Attachments:
Filters.zip ‏41 KB

How do I use the Japanese fonts in Font Book in a Pages document?

How does one use the Japanese fonts in Font Book in a Pages document. Pages has its own fonts but I cannot get the Japanese fonts into it.

To type japanese on a computer you change the keyboard, not the font. Go to system prefs/keyboard/input sources and add Japanese/Kotoeri to the list, then select Hiragana in the "flag" menu at the top right of the screen, then type. The font will take care of itself.
http://redcocoon.org/cab/mysoft.html
If you have any further questions, just ask.

How do I use the web cam on my pc? Hp w2007 I have windows vista

How do I use the web cam on my pc? Hp w2007 I have windows vista

Hp w2007 is a HP monitor without webcam ...
Where is the webcam?
V.
*** Say 'Thanks' with Kudos ***

How do I use the filter to automatically print email and .pdf, .xls, .doc attachments to my default network printer and to other network printers

Similar Messages

Maybe you are looking for