How do I use the High Speed Data Logger with multiple I/O devices?

I am using the High Speed Data Logger vi to read from a 16 channel A/D card (NI PCI-MIO-16E). The project may require more than 16 channels. How can I use High Speed Data Logger to read from two A/D cards? Will it be able to write the data to one file?

The High Speed Data Logger vi will not acquire and right to multiple DAQ boards at the same time without modification. LabVIEW is more than capable of doing this what you are trying to do, but you will have to modify the code.
Regards,
Anuj D.

Similar Messages

  • How can I modify the High Speed Data Reader VI to show correct time informatio​n in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
    How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
    I hope you can explain easily because I am a beginner.

    Hey Chunrok,
    I've modified the High Speed Data Reader VI slightly so that it now uses the scan rate of the data (as determined from the file) to set the scaling for the data points. If you wanted the start time to be a specific time you could use the start time obtained from your file to set the xscale offset as well.
    I hope this helps!
    Sarah Miracle
    National Instruments
    Attachments:
    Example.vi ‏281 KB

  • How can I modify the High Speed Data Reader VI to show the time information in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its time information in the graph.
    How can I modify the High Speed Data Reader VI to show the time information in x-axis?
    I hope you can explain easily because I am a beginner.

    Format the x axis to either absoulte or relative time.
    You can do this by right clickingo n the graph and selecting x axis then formatting from the menu.
    Thanks,
    Naresh

  • How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
    How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
    I hope you can explain easily because I am a beginner.

    First, I couldn't seem to find that example either on computer or on the NI sites.
    The problem that we're running into is stated in the article that I pointed to - when real time VIs are running, then the OS will stop updating the OS clock. TO us it looks like the clock is losing time. There is a hardware clock on the PXI and it is read only during boot up to set the OS clock. Our discussions with NI have not led to a solution for this problem without checking the time on start and then checking the tick count (which does not lose time) and calculating what the current time is. No access to the hardware clock is supplied.
    We're still working on a simpler way to get accurate time.
    Rob

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

    How can I use the built-in Isight camera and an external video camera at the same time?
    I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
    Thanks

    Simple question with a not so simple answer.
    (a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations.  Digital video is processor intensive.  The only way to know if your Mac can do this it to try it.  If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus.  You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
    (b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
    How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
    (1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
    If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
    This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
    (2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
    Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
    Other iMovie versions work slightly differently.
    iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
      http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
    iMovie 8 (from iLife '09) is slightly different as explained in this article:
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
    In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
    (3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
    Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
    However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
    (If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
    (4) For FaceTime, launch the app and click the Video menu item.
    If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
    If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
    (5) I do not use Skype oir Oovoo.  For those or other apps, see Help for each app for info on how to select your desired camera.
    Message was edited by: EZ Jim

  • [EWS][Java] How can I use the Search Filter only mails with attachments?

    Hey,
    I'm trying to search a folder ( doesn't matter  which ) for ONLY mails with attachments.
    How can I use the search filter for that purpose? 
    Thanks!

    You can drag the attachment collumn from settings and sort on that collumn
    In the main Outlook window, on the View menu, point to
    Current View, and then click Customize Current View.
    Click Fields. In the Available fields list, click the field that you want to add, and then click
    Add.
    Come back and mark replies as answer if they help, and help others with the same problem. If this post is helpful please vote it as Helpful on the left side.

  • How do I use the event.target.name String with an external dispatchEvent?

    ...I hope the title question makes sense...
    On my stage I have an externally loaded SWF with a button. When clicked the button dispatches an event to the main stage.
    On the main stage a listener then loads an SWF into a loader called gallery.
    The gallery loader is also being shared by buttons on the main stage which use the event.target.name String to call in SWFs with corresponding names.
    I am using Tweens to fade-out and -in content to the gallery when a button is pressed.
    Loading the SWFs was working until I tried to create a universal button function for the dispatchEvent buttons...
    The problem I have is that I don't know how to define the String to tell the newSWFRequest where to find the SWF when triggered by the external buttons.
    (I may be doing this all wrong... but figured the best way to load an SWF on to the main stage from an external SWF was by using dispatchEvent??)
    My code triggers the Event and the gallery loader fades out, but then it cannot find the new SWF:
    Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
    Please can someone help me understand the way to make the String point in the right direction? (I think the only errors are in bold below)
    Code:
    var myTweenIn2:Tween;
    var myTweenOut2:Tween;
    var nextLoadS2:String;
    // Listen for external event dispatched from external btns
    addEventListener("contactStage", btnClickExtrnl);
    function btnClickExtrnl(e:Event):void {
    nextLoadS2 = ?????
    myTweenOut2=new Tween(gallery,"alpha",None.easeOut,gallery.alpha,0,0.2,true);
    myTweenOut2.addEventListener(TweenEvent.MOTION_FINISH,tweenOutCompleteF2);
    // Btns Universal function
    function tweenOutCompleteF2(e:TweenEvent){
    myTweenOut2.removeEventListener(TweenEvent.MOTION_FINISH,tweenOutCompleteF2);
    myTweenOut2=null;
        var newSWFRequest:URLRequest = new URLRequest("swfs/" + nextLoadS2 + ".swf");
    myTweenIn2 = new Tween(gallery, "alpha", None.easeOut, gallery.alpha, 1, 0.2, true);
        gallery.load(newSWFRequest);
        gallery.x = Xpos;
        gallery.y = Ypos;
    Thank you.

    That works – thank you!
    I'm now using this code to fade in each of the SWFs:
    function contactStage(e:MouseEvent):void {
        var newSWFRequest:URLRequest = new URLRequest("swfs/"+e.currentTarget.name+".swf");
        myTweenIn = new Tween(gallery,  "alpha", None.easeOut, 0, 1, 0.2, true);
        gallery.load(newSWFRequest);
        gallery.x = Xpos;
        gallery.y = Ypos;
    But I cannot add the fade out function. I have amended the above code to create:
    var myTweenOutX:Tween;
    var myTweenInX:Tween;
    function contactStage(e:MouseEvent):void {
    myTweenOutX=new Tween(gallery,"alpha",None.easeOut,gallery.alpha,0,0.2,true);
    myTweenOutX.addEventListener(TweenEvent.MOTION_FINISH,tweenOutCompleteFX);
    function tweenOutCompleteFX(e:TweenEvent){
    myTweenOutX.removeEventListener(TweenEvent.MOTION_FINISH,tweenOutCompleteFX);
    myTweenOutX=null;
        var newSWFRequest:URLRequest = new URLRequest("swfs/"+e.currentTarget.name+".swf");
    myTweenInX = new Tween(gallery,  "alpha", None.easeOut, 0, 1, 0.2, true);
        gallery.load(newSWFRequest);
        gallery.x = Xpos;
        gallery.y = Ypos;
    But get this error:
    ReferenceError: Error #1069: Property name not found on fl.transitions.Tween and there is no default value.
    at ACOUSTIC_fla::MainTimeline/tweenOutCompleteFX()[ACOUSTIC_fla.MainTimeline::frame1:110]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at fl.transitions::Tween/set time()
    at fl.transitions::Tween/nextFrame()
    at fl.transitions::Tween/onEnterFrame()
    Where am I going wrong?

  • How do I use the Index Values property node with a multidimensional array.

    I am using a 2D array to store operator inputs on my front panel.  I only want to display one element to the operator at a time.  I am trying to use the Index Values property node to change the displayed element.  However, I can only get the Rows index to work.  How do I direct the Columns index as well?  The help says to use one per dimension.  I need clarification on what this is talking about.  I've tried adding a second element to the property node, 2 seperate property nodes, and diferent wiring techniques. (series, parallel)

    If you only wire up one of the inputs (col or row) what you get out is a 1D array of either the column or row. If you wire controls to both, then you will get one element out of the array. Getting a single element in a 2D array requires you to specify both a row and column.
    Message Edited by Dennis Knutson on 02-08-2007 08:34 AM
    Attachments:
    Index 2D Array.PNG ‏2 KB

  • How do I use the built-in audio input with AU Lab?

    I just tried AU Lab for the first time, and I can't select an audio input.
    The "Create New Document" window lets me choose "Built-in Output", but the pulldown for Input Source is greyed out. The area under the "Input" button says, "Audio Input Not Supported". How can it not support the built-in audio input? I even tried using SoundFlower to route the signal from the Line In (a small app) to the Input of AU Lab. AU Lab's display then shows two channels from Soundflower, but they are still greyed out.
    All I want to do is get a signal from the built-in audio input routed to AU Lab so I can use AU effects to process the audio signal in real time. How do I do this?

    They comes configured with your software. If you want to use, for example, Skype, you need to run the configuration wizard section.
    Best regards.
    IPnaSh
    First Spanish Community Guru - Colaborador ad honorem

  • How do I use the same iCloud Photo Library on multiple iPhones?

    I want to be able to use iCloud photo library on all my i-Devices, with the same photo library. I can log in with the same iCloud account on all devices, but, then I can't get FindMyFriends to work, because each IOS device needs it's own iCloud account for FindMyFriends.
    Suggestions?

    it tells me it is already in use
    You will need to contact the previous owner of the iPhone in order to change the Apple ID.

  • How can I use the concept knowed as "MasterPage" with "Content" in JSF ?

    In ASP.NET ( Microsoft .NET ) and in PRADO Framework (PHP) there is concept to separate the portions of page in separate templates.
    For example, all pages of this site share the same header and footer portions.
    If we repeatedly put header and footer in every page source file, it will be a maintenance headache if in future we want to something in the header or footer.
    So, I think I found a way to solve that!
    it would be this:
    http://people.apache.org/maven-snapshot-repository/org/apache/myfaces/tomahawk/myfaces-example-tiles/1.1.4-SNAPSHOT/
    The war file is this: myfaces-example-tiles-1.1.4-SNAPSHOT.war
    It has been successfully deployed on my machine, but I didn't can implement the same functionality in my application.
    has anyone already use tiles to solve that problem?
    what are its dependencies?
    is there another approach?
    Regards!

    yes!
    That's right !!
    I already knew.
    I found an interesting link about my question.
    take a look: http://forum.exadel.com/viewtopic.php?t=968
    it sounds a little different because in that approach it's necessary only ONE "master page" for the application.
    On the other hand, as you said would be necessary for each page something like this:
    home.jsf
    <f:view>
        <jsp:include page="header.jsp" />
        <h1>home</h1>
        <jsp:include page="footer.jsp" />
    </f:view>
    about.jsf
    <f:view>
        <jsp:include page="header.jsp" />
        <h1>about</h1>
        <jsp:include page="footer.jsp" />
    </f:view>did you understand?
    I think this approach a litle worse than one another because I must place many times the includes "header.jsp" "footer.jsp" and so on.
    what do you think about that solution?

  • I downgraded from CC to CS6, and Acrobat XI is now in trial mode. How can I use the Acrobat X that comes with the CS6 Master Collection disc? Should I uninstall Acrobat XI then install Acrobat X? What about de-/reactivation?

    I've read about deactivating/reactivating with Photoshop. If applicable, how is that done?
    Macbook Pro 16GB Mac OS X 10.9.4

    deactivating is done by opening a programs > click help > click deactivate.
    that's not applicable to cc apps.
    to use acrobat x, uninstall acrobat xi, clean and then install acrobat x, Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

  • How can I use the CPS for Oracle ECM with webcenter

    Hi I did install webcenter "webcenter_windows_x86_101320_disk1" but im not able to use CPS(content portlet suite) anybody used them together before .

    Hey Khalid,
    I think you might be in the wrong forum. This one is for WebCenter Interaction - the old BEA ALUI/Plumtree product, not the original Oracle WebCenter Portal.
    Terrible terrible terrible job in picking such similar names for these 2 different products!

  • How can i use the webcamera Live! Ultra with Msn mesenger?

    hello i need to use this camera with msn messenger but is says that i cn only use it with yahoo msn , but on the box says that i can use it also with msn mesenger i need help fast !
    thx

    oh good noone replies this forums are said to answer questions? LOL i have been w8ing week .. noone replies im returning the cam to the shop..

Maybe you are looking for