How do I use the same preset on a number of photos?

I have imported a preset and want to use it on several photos in the same folder. How do I do this? I cant seem to see the option when I try to sync them.

Also in the Develop Module, select the files you wish to make the same changes in the film strip. Then in the lower right corner there is an option to change the sync function to auto sync. With Auto Sync active any develop changes made (including presets) will be applied to all the selected images.
Important: When you finish using this feature make sure you turn it off, if not whenever you select multiple images it will be active again.

Similar Messages

How do I use the same photo twice in a slideshow created in iPhoto'11?

I created a slideshow in iPhoto'11 and would like to use the first slide also as the last slide.
How can I use the same photo twice?

Seems you have to duplicate the photo in your Library to add the same picture twice.

How do I use the same icloud address as my itunes one

how do I use the same icloud ID as my itunes one

it tells me it is already in use
You will need to contact the previous owner of the iPhone in order to change the Apple ID.

HT204053 My husband and I have separate apple IDs, how do we use the same iTunes account

My husband and I have separate apple IDs , how do we use the same iTunes account

You don't. Each ID is associated with a separate account. Each of you should maintain a separate user account on your computer so as to maintain separate iTunes Libraries. Do not sync your phone with your husbands account or Apple ID and vice-versa or your data will become inter-mixed or worse - deleted from the phone.
Try to understand that iDevices are intended for use by one person with one Apple ID, one iTunes Library, and one iTunes account. They are not multi-user devices.

How can i use the same cursor in a loop fro multipletimes.

I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling under one state.But when it comes to the second state,as the second cursor is already open it is unable to fetch the records.Please help me .How can i use the same cursor in a loop fro multipletimes.
I am sending the code which i have written in When-Button-Pressed-Trigger...
declare
     sid number;
     pid number;
cursor csid is select distinct(site_id) from cyber_ppt;
cursor cpid is select pc_id,st_dt,ed_dt from cyber_ppt where site_id = sid;
     stdt varchar2(10);
     eddt varchar2(10);
     nom number;
     stmonth varchar2(10);
     edmonth varchar2(10);
     cjan number:=0;
     cfeb number:=0;
     cmar number:=0;
     capr number:=0;
     cmay number:=0;
     cjun number:=0;
     cjul number:=0;
     caug number:=0;
     csep number:=0;
     coct number:=0;
     cnov number:=0;
     cdec number:=0;
     i number:=1;
begin
     open csid ;
     loop
     fetch csid into sid;
          exit when csid %notfound;
          message(sid);
     open cpid;
     loop
     fetch cpid into pid,stdt,eddt ;
     exit when cpid %notfound;
     message(sid||'-'||pid);
     stmonth:=substr(stdt,4,3);
     edmonth:=substr(eddt,4,3);
     nom:= months_between(eddt,stdt);
while i <= round(nom)
     loop
     stmonth:=substr(stdt,4,3);
if stmonth='JAN' then
          cjan:=cjan+1;
elsif stmonth='FEB' then
          cfeb:=cfeb+1;
elsif stmonth='MAR' then
          cmar:=cmar+1;
elsif stmonth='APR' then
          capr:=capr+1;
elsif stmonth='MAY' then
          cmay:=cmay+1;
elsif stmonth='JUN' then
          cjun:=cjun+1;
elsif stmonth ='JUL' then
          cjul:=cjul+1;
elsif stmonth ='AUG' then
          caug:=caug+1;
elsif stmonth ='SEP' then
          csep:=csep+1;
elsif stmonth ='OCT' then
          coct:=coct+1;
elsif stmonth ='NOV' then
          cnov:=cnov+1;
elsif stmonth ='DEC' then
          cdec:=cdec+1;
end if;
     stdt:=add_months(stdt,1);
     i:=i+1;
     end loop;
     end loop;
     end loop;
     end;


try this /* untested */
DECLARE
sid           NUMBER;
pid           NUMBER;
CURSOR csid IS SELECT DISTINCT(site_id) FROM cyber_ppt;
CURSOR cpid(nSid NUMBER) is SELECT pc_id,st_dt,ed_dt FROM cyber_ppt WHERE site_id = nSid;
stdt        VARCHAR2(10);
eddt        VARCHAR2(10);
nom         NUMBER;
stmonth     VARCHAR2(10);
edmonth     VARCHAR2(10);
cjan         NUMBER:=0;
cfeb         NUMBER:=0;
cmar         NUMBER:=0;
capr         NUMBER:=0;
cmay         NUMBER:=0;
cjun         NUMBER:=0;
cjul         NUMBER:=0;
caug         NUMBER:=0;
csep         NUMBER:=0;
coct         NUMBER:=0;
cnov         NUMBER:=0;
cdec         NUMBER:=0;
i            NUMBER:=1;
BEGIN
FOR rec IN csid
LOOP
                  sid := rec.csid;
FOR cRec IN cpid(sid)
LOOP
                 pid := cRec.pc_id;
                 stdt := cRec.st_dt;
                 eddt := cRec.ed_dt;
stmonth:= SUBSTR(stdt,4,3);
edmonth:= SUBSTR(eddt,4,3);
nom:= months_between(eddt,stdt);
WHILE i <= round(nom)
LOOP
          stmonth := SUBSTR(stdt,4,3);
IF stmonth='JAN'
THEN
         cjan:=cjan+1;
ELSIF stmonth='FEB' THEN
         cfeb:=cfeb+1;
ELSIF stmonth='MAR' THEN
          cmar:=cmar+1;
ELSIF stmonth='APR' THEN
          capr:=capr+1;
ELSIF stmonth='MAY' THEN
          cmay:=cmay+1;
ELSIF stmonth='JUN' THEN
          cjun:=cjun+1;
ELSIF stmonth ='JUL' THEN
          cjul:=cjul+1;
ELSIF stmonth ='AUG' THEN
          caug:=caug+1;
ELSIF stmonth ='SEP' THEN
          csep:=csep+1;
ELSIF stmonth ='OCT' THEN
          coct:=coct+1;
ELSIF stmonth ='NOV' THEN
          cnov:=cnov+1;
ELSIF stmonth ='DEC' THEN
          cdec:=cdec+1;
END IF;
         stdt:=add_months(stdt,1);
         i:=i+1;
END LOOP;
END LOOP;
END LOOP;
END;

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

How can we use the same package in our report used by some other report

how can we use the same package in our report used by some other report

Hi,
You just need to assign package while saving your report.
No extra is required providing you are aware of package to be used.

How do i change my iPhone to another iPhone using the same sim but keep all my photos ands everything?

How do i change my iphone to another iphone using the same sim but keep all my photos and everything?

Old Phone to New Phone
http://support.apple.com/kb/HT2109

How do I use the same apple id for 2 iPads, but not share email, phone #, etc.?

I have had 2 iPads for a couple years, both using the same apple id. One is used primarily by my husband. Today I got notifications that my husband's ipad is now using all the same email addresses and phone number associated with mine. How do I change this?

You can set the same Apple ID for iTunes and App Stores, but have different Apple ID's for Messages, iCloud and Facetime.
Settings->iCloud->Apple ID->Sign Out
Settings->Facetime->Apple ID->Sign Out
Settings->Messages->Send & Receive->Apple ID->Sign Out
Just go into Settings, and make sure the Apple ID set for those services is different for both iPads.

How do I use the same profile for two users on the same computer

I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager

How do I use the same Apple ID on my iPad as my iPhone?

I can't access the email I used for my Apple ID on my iPad and want to use the Apple ID that I use on my iPhone on my iPad, but don't know how to change it..

Thanks Rudegar, that worked. Would you happen to know how to do the same with iCloud? It's the same thing - the iCloud account on my iPad isn't in use anymore and wanted to use the same account as my iPhone..

How do I use the same Icloud address on my Ipad and Iphone ? I went to put my icloud address on my Iphone, but ttells me it is already being used and to create another one, which I dont want to do

I have just bought an Iphone 4s to compliment my Ipad Air, I want to use my Icloud address on both machines but cant get my iphone to accept my icloud address, it tells me it is already in use and to create a new one, which is not what I want.. How do I get the same email on both devices?

it tells me it is already in use
You will need to contact the previous owner of the iPhone in order to change the Apple ID.

How can I use the same "I Tunes" on two different computers

I’m using two different kinds of Personal Computer: One is Desktop PC And the other one is Notebook .
In each computer there are the same songs and when I get the new ones to the Desktop I want them to be placed on the Notebook or reverse.
Where does the I Tunes save the playlist on the hard drive ?
I have prepared a playlist on my Notebook and want it to be seen on the Desktop but I dont want to fallow the steps File > Library > Export Playlist on the Notebook. Is there any other way to make this issue instead of the mentioned steps.
How can I see the same Playlists and songs on two different computers ( notebook and desktop) including the updating processes.
Operating systems of the computers:
Desktop: XP Pro
Notebook: Vista Bussiness

I use SyncToy 2.0 to keep two instances of my library in sync. SyncToy's preview will show which files it is about to update giving you a chance to spot unexpected changes and during the run only the changed files will be copied saving lots of time.
As long as I sync after making updates at one instance of the library before making any updates at the other then everything works just fine. I periodically run iTunes Folder Watch to check for any orphaned entries or new items that haven't been imported into the active library. If your machines are regularly networked together this process is fairly straightfoward. Mine are in disparate locations so I use one of the (physically) small WD My Passport host powered drives which I take between home & work, synchronising at either end. This gives me three complete copies of my library so I'm covering backup & synchronisation in the same operation.
When connecting my iPod at either location iTunes recognises itself as the "home" library for the iPod so I'm able to use the sync with selected playlists option without getting warning messages about the iPod being synced with a different library.
tt2

How can I use the same sleepimage over and over?

Hi, this was asked a while ago for Tiger, but had no real answer. Now I hope things have changed in Leopard 10.5.4.
I have a STATIC system on a car that should boot over and over in exactly the same way. The idea is to make a good sleepimage (/var/vm/sleepimage) and then force the computer to read it at every startup AS IF it was waking up from sleep mode all the times.
This MUST be possible because OSX does it every time it wakes up from safesleep (sudo pmset hibernatemode 1). All I need it to find out WHERE OSX writes down that at the next wake it should use the sleepimage instead of a normal boot. Then, once I know where it write this, I simply force that flag to be active all the times.
Please also be aware of the following notes and constraints:
0. The boot should be as fast as possible
1. I can't to use the regular sleep function: the system must drain zero power while shut down
2. There are no dangers in using the same sleepimage multiple times: the disk contents do not change. The system should be absolutely identical at every boot (or "wake")
3. The system is ALWAYS shut down by pulling the plug of the MacMini. Thereshould be no possibility for the system to "update" the sleepimage
I hope some of you OSX experts will give me a hint concerning where this information is stored (and maybe how to override it)
thanks a lot
Lele
Message was edited by: Leelx

Hi, this was asked a while ago for Tiger, but had no real answer. Now I hope things have changed in Leopard 10.5.4.
I have a STATIC system on a car that should boot over and over in exactly the same way. The idea is to make a good sleepimage (/var/vm/sleepimage) and then force the computer to read it at every startup AS IF it was waking up from sleep mode all the times.
This MUST be possible because OSX does it every time it wakes up from safesleep (sudo pmset hibernatemode 1). All I need it to find out WHERE OSX writes down that at the next wake it should use the sleepimage instead of a normal boot. Then, once I know where it write this, I simply force that flag to be active all the times.
Please also be aware of the following notes and constraints:
0. The boot should be as fast as possible
1. I can't to use the regular sleep function: the system must drain zero power while shut down
2. There are no dangers in using the same sleepimage multiple times: the disk contents do not change. The system should be absolutely identical at every boot (or "wake")
3. The system is ALWAYS shut down by pulling the plug of the MacMini. Thereshould be no possibility for the system to "update" the sleepimage
I hope some of you OSX experts will give me a hint concerning where this information is stored (and maybe how to override it)
thanks a lot
Lele
Message was edited by: Leelx

How do I use the same preset on a number of photos?

Similar Messages

Maybe you are looking for