How do i use the text highlighter on web pages

I want to highlight some small print on a banking web page to email. The print is too small and will be missed if not highlighted. I have installed the text highlight add on in my tool bar but don't know how to use it.

Hi Trease,
Check to make sure that is it is not disabled in the about:addons page of your browser window.
There are a few addons with that name, but I would also take a look at the description on its addons.mozilla.org page if you still have it.

Similar Messages

How do I get rid of those annoying white-on-black "?" marks that pepper the text on some web pages

They don't appear in IE. "?" characters are on diamond shaped black background and overwrite characters underneath making it difficult to read the text.

A diamond indicates a problem with the font or the content of a web page. You get a diamond if the page uses an 8 bit encoding and the character can't be mapped. A possible cause is that the text was copied from another (Unicode) source and pasted on that website. IE probably shows a white box or nothing in such a case. It is also possible that the page is send with the wrong encoding by the server.
Can you post a link to a page where you see that?

How do i use the jsp session in web application

pls i do i go about trying to maintain a user in a web application when he sign in so that his state would be mainain through out the other pages and also adding sound to my pge the page is being design with jsp thank u frm hamzah

I see what you are saying.
The JNDI approach should work-we will try to reproduce this internally.
I would recommend leveraging the OSGi service registry, instead of using JNDI, however. The Event Server is a modular server based on OSGi, so one should use the OSGi service registry whenever possible instead of using the jndi registry. Jndi is primarily there to support legacy code that requires Jndi.
Any data sources that you configure are automatically registered in the OSGi service registry. When there is more than one data source they can be distinguished using their name.
There are a couple of options.
If you want to inject a reference to your datasource into a Spring bean, you can use an annotation, @Service, to annotate a setter method on your bean (see my previous post). The container will then inject a reference to the data source into the bean.
You can also put the following in your spring application context file
<osgi:reference id="myDataSource"
interface="javax.sql.DataSource"/>
This creates a bean proxy that references the datasource by looking up the datasource in the OSGi service registry. It works similarly to JndiObjectFactoryBean, but it uses the OSGi service registry instead of the JNDI registry. You can read more about it here
http://www.springframework.org/osgi/specification
(Look in section 3.3)
Hope that helps.
Seth
Edited by swhite at 08/01/2007 6:19 PM

How can I use the scroll wheel to move page by page

I have Adobe Acrobat 8 and I would like to be able to use the scroll wheel in my mouse to move page by page instead of the page icons in the tool bar. I recently had my computer updated from Windows XP to Windows 7 and I used to be able to do that in XP. I do a lot of moving around in documents and it's easier to move page by page if I don't have to be moving the cursor all the time.
Any help would be greatly appreciated as I don't want to everything else (like Office 2007 Word) to move whole pages with the scroll wheel, just Acrobat.

Make sure that View - Page Display - Single Page View is selected in
Acrobat.

Why can't I read the text on some web pages?

I'm using my laptop with a Vista OS and Firefox. Some of the text that appears on web pages seems to be rendered incorrectly on my screen. I'm hoping someone can tell me how this happens.
Here is a [http://img840.imageshack.us/img840/151/54855858.jpg screen shot] of what the homepage for Digg.com looks like.

I have the same problem which is one reason I still use IE8 (which has its own problems). I change my font to be bigger, and I use my toolbar on the side. Firefox apparently doesn't like this and squooshes the page together.
I could do all sorts of research to figure out what is wrong, reconfigure Firefox, use the fonts it wants, install, zoom, uninstall fonts, and perhaps find apps to change the way it looks. I probably could set up my computer to satisfy the needs of Firefox.
Nah. I like my computer to work for me! So, I have to go to IE a lot. I use FF for some things. IE for others.
Good luckl

How do I search for text on safari web pages, How do I search for text on safari web pages

How so I do a text search on a safari web page? Please help

When you're on the page you want to search tap the URL bar to turn it blue. Tap the x so it disappears. Type the word you want to search for, at the bottom of the suggestions is find on page, tap that. Your high-lighted text should appear.

How do i search for text on a web page?

on internet exolorer I could enter a name i was searching for in a box at the top of the web page and quickly find the name.
Is there anything like this on Firefox?

Ctrl+F or View > Find opens the Find Bar at the bottom of the page just above the Firefox Status Bar. See: https://support.mozilla.com/en-US/kb/Searching+within+a+page
 
The information submitted with your question indicates that you have out of date plugins with known security issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
* Adobe Shockwave for Director Netscape plug-in, version 11.5
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox

How do I resize the VI in my web page?

When I publish my VI to the web, it shows up taking the entire screen. I would like to size it & place it in a table with my other web page inforamation. Also, why does the Nat. Instur. Eval logo show up at the bottom of the VI when on the web? I'm running LabView 7.0 on Windows 2000. I am currently evaluting the software.

You need to change the window size of the VI, you can do this by going to the LabVIEW menu:
File >> VI properties
Then Category >> Window Size
Under Minimum Panel Size specify the dimensions. After closing this you need to resize the VI window manually anything down to the previous specified dimensions. When you run the program the window size will be what it is currently in development mode. One thing to note also is that When you save the VI it will store its size also, which it uses when you reopen it.

Sometimes the text on a web page is distorted or looks like it overlays other text. Some web sites the text gets totally mis-aligned. The same sites are fine when I use IE. And sometimes, when typing ... the cursor goes awry.

Text is overlaid on text to render the page unreadable. sometimes columns are totally misaligned.

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac) 
See:
* http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
* Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
See also [[Websites look wrong]]
If you need to increase (or decrease) the font size on websites then look at the NoSquint or Default FullZoom Level extension.
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

How can I standardise the display of each web page

Firefox displays every webpage at a different setting, how can I have every webpage fit the full width of my monitor, this happens no matter what screen resolution I have my monitor set to? at the moment to get webpages the way I want them I have to zoom in/out ever read different webpage which is tiresome, I much prefer Firefox but if I can't get it the way I want it to look I may as well go back to IE.
When I used using Internet Explorer every webpage filled the whole monitor making it much easier to read.

Set a default zoom level in Firefox by using one of these addons:
Default FullZoom Level extension: 
https://addons.mozilla.org/en-US/firefox/addon/6965 
or 
NoSquint extension: 
https://addons.mozilla.org/firefox/2592/

How do I stop the 'Open as a web page' feature and just download the document directly? I want to keep the document's original title, not have it listed as "attachment".

When I click on an email attachment, it downloads as "attachment" and not the original title. This just started happening recently, so I'm guessing it's some sort of setting.

Kurt Lang wrote:
Outlook cannot handle what it refers to as "internet email." It is designed around its own mail server and has never been coded to completely handle email-standard emails.
I have to say I don't understand the reference. By "its own mail server", do you mean a server running Outlook Exchange? If so, that doesn't apply to me, or I would imagine, many users of Outlook for Mac.
As you are running a Mac, I wouldn't assume that you would be running a version of Outlook written for a "Windows PC." So, yes, none of that applies to you.

How to include non web pages to the "Create PDF from Web Page" feature?

In Acrobat Pro (v. 10), when I use the "Create PDF from Web Page" feature, it works great for html pages, but it skips non-html links (doc, pdf, ppt, xls, etc). I need Acrobat Pro to convert those files and put them in the order as well. I don't see an option for this in settings. Is there ANY way I can do this? This is for an archiving purpose and I have 10,000 plus files to convert. Please help.

This is a question i'm trying to answer too. My issue is that I have a PDF file which itself contains links to both DOC and PDF files. The end result is that I need one consolidated PDF containing all the linked files (in order).
I can run the "create from web page" on this PDF file, and it'll download them, but not convert them. It just adds them as "jumbled" text to the end of the document. I need it to download, convert, and then append them.
So, as isunshine3 asked above, any way to have Adobe convert the files that it finds linked when running the "create from web page"?
THanks
Matt

How to use the text module in script

hi,
i script how to use the text modules and how to write the code in layout of the script?

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

My Macbook pro won't open downloaded programs. it just opens the code it was written in using the text and edit app. How can I fix this?

My Macbook pro won't open downloaded programs, it just opens the code it was written in using the text and edit app. How can I fix this? I just bought the computer last month so this is some what frustrating.

If you are downloading .exe files, those are Windows programs, and will not run on your Mac unless you install Windows on it. (That is possible, if you need one of those apps.)

How can I restore the text selection highlight colour to the default black colour in indesign CC ?

How can I restore the text selection highlight colour to the default black colour in indesign CC ?

Manish Shama, thanks for your speedy response. I was able to get into my MAC settings and change the background from the black to whatever color I like, so that helps (THANKS!). But the real issue is that the selected text does not turn white (even though that's what's specified in my MAC settings), it remains black. I really want to have the selection reverse out as it always has for years and years going all the way back to PageMaker Any ideas?

How do i use the text highlighter on web pages

Similar Messages

Maybe you are looking for