How do I use the UHRY_ACTIVE_ROWS parameter?

We want to create a button to display the rows as a hierarchy (as available in query properties). To do this I realise I need to use the UHRY_ACTIVE_ROWS parameter in the template properties so to change the properties dynamically (as we require this functionality in a button) we started with the javascript command
newurl = "&CMD=LDOC&TEMPLATE_ID=YTEST_TEMPLATE&UHRY_ACTIVE_ROWS=X";
SAPBWOpenURL(SAP_BW_URL_Get()+newurl);
This successfully sets the flag in the query properties but as we have mandatory variables the variable screen is shown which we don't want to see as the users have already entered the variables previously.
Is it possible therefore to
1) Avoid the Variables screen showing as they are already populated?
or
2) Set UHRY_ACTIVE_ROWS in another method?

Hi Neal,
Not sure if this would help..
You can try using an additional parameter in your URL
VARIABLE_SCREEN=%20 or VARIABLE_SCREEN=' '
This should supress the Variable screen.
Cheers,
Praveen.

Similar Messages

  • How Do I Use the TCallback parameter in ibnotify for Delphi in dpib32.pas​?

    I'm having some troubles. I've been using the dpib32.pas library for at least 2 years now with no troubles. Now I need to handle some oddball stuff using Async Callbacks. I've referred to App Note 100 and am 98% there... I just can't figure out how to properly use the TCallback function in ibnotify. Any clues?
    First thought was to add a function matching the TCallBack function...
    function TfrmMain.IBCallBack(ud : integer;LocalIbsta : integer;LocalIberr : integer;LocalIbcntl : Longint;var RefData): integer; stdcall;
    then use it as a the parameter in ibnotify...
    ibnotify(Dev,RQS,@IBCallback,NULL);
    All this gives me is a 'variable required' message on compilation.

    Never mind. I dug around in my code archives and found the proper methid for implementing the callback.

  • How can I use the same parameter to use elsewhere by Manage Variables ?

    Hello,
    I have a little problem that I need to know. I want to use the same parameter to use elsewhere.
    Example,
    I have a parameter on page 1 and I wish to use this parameter in the other page by Manage Variables.
    How can I do this ?
    Thank you.

    ..just open ManageVariables (right click on the a page and select Manage Variables)...
    then you select the parameter on the page where you want to insert your previous value (your variable)...use the dropdown list to select the variable that contains your value...and it should work
    /m

  • How do I use the z parameter instead of component's stack order for layout?

    Hi,
    In my current project I am already using the cool new 3D properties (z/rotationX/rotationY/rotationZ) of the Flex 4 SDK. It really makes fun playing
    around with them, but it is actually pretty annoying that elements that ought to be postioned on top of each other with different z-values are displayed according to their stack order (the positon with respect to to their DisplayObject-siblings). This leads to the non-realistic appearance of objects that should be positioned in the back of the scene right on top of everything else.
    The only solution for this problem is to manually set the z-order in which I want the objects to appear on the screen by using the removeChild()/addChild() methods of the parent-container. This is not only annoying but quite expensive and additionally non-dynamic.
    Is there any means to make a container use its children's position in space for layout instead of its "z-stack"? If not, I would consider this as a bug, at least when it comes to 3D placement of objects.
    Thank's for any hints and best regards,
    Manuel Fittko

    If you are running the broker as a Window's service then
    jmqsvcadmin install -jrehome (or -javahome) is the correct
    way to specify an alternate JRE. If you are running the broker
    directly on the command line then you can use -jrehome directly
    with the jmqbroker command.

  • How to use the region parameter of main report for subreport chart titles?

    I am using Crystal Reports 11.
    I create 1 main report with 10 sub-reports that contain cross-tabs & charts. The main report has a parameter regarding 3 different areas: region1, region2, and region3.
    I use the method of adding the u2018regionu2019 parameter of main report to the selection formula of the sub-reports. So, I can select 'region' from main report to controll outputs in sub-reports by region.
    I use formulas for chart titles, e.g.:
    Select {Product Code}
    Case 'a111':
      u2018Region1 u2013 a111 Counts'
    Case u2018b222u2019:
      u2018Region1 u2013 b222 Counts'
    u2026
    u2026
    Default:
    u2026
    Since I pass the u2018regionu2019 parameter of main report to sub-reports, I have to change chart titles dynamically based on the region I select.
    How can I use the region parameter from main report in the formulas to get chart titles dynamically?
    Thank you in advance.

    Thank you.
    I am not using Chart Title with "Chart Expert".
    I am using a formula for chart titles, e.g.:
    Select {Product Code}
    Case 'a111':
      u2018Region1 u2013 a111 Counts'
    Case u2018b222u2019:
      u2018Region1 u2013 b222 Counts'
    u2026
    u2026
    Default:
    u2026
    I drag this formula above the charts and it looks like a dynamic title. So, for product a111, the chart title would be "Region1 u2013 a111 Counts"; for product b222, the chart title would be "Region1 u2013 b222" Counts; and so on ...
    Because I pass the region parameter from master report to subreport, I want to change the region part of the chart titles dynamically.
    For example,
    when select Region1, the chart titles should be: "Region1 u2013 a111 Counts"; "Region1 u2013 b222"; ...
    when select Region2, the chart titles should be: "Region2 u2013 a111 Counts"; "Region2 u2013 b222"; ...
    I want to add the region parameter into the tiltle formula.
    How should I do?

  • Moving a PageItem using the "by" parameter (JavaScript)

    Hi,
    So I want to move some page items. I went through the Reference and found that PageItems have the method "move"
    That method wants either to (The new location of the PageItem,in the format (x, y). Can accept: Array of 2 Units, Spread, Page or Layer. (Optional)) or by (The amount (in measurement units) to move the PageItem relative to its current position, in the format (x, y). (Optional))
    So I want to use the by parameter because moves based on the PageItem's current position.
    This is what I've been trying:
    myPage.allPageItems[i].move({by:[0, someVar]});
    But when I try to do this, it says "Invalid value for parameter 'to' of method 'move'..."
    How can I use the by parameter instead of to?

    Hi Jongware,
    I'm afraid your memory was a bit to vague there (I think)
    The second option doesn't work but one can use:
    myPage.allPageItems[i].move([],[0, someVar]);
    Trevor
    Alex, You should mark Jongware's answer as correct
    n.b. you might want to use
    myPage.pageItems.itemByRange (0,1).move([], [0, someVar]);
    Changing the range rather than looping through the items.

  • How to use the "out" parameter in idl

    hello.idl:
    module HelloApp
    interface Hello
    string sayHello();
    void getPass(in string name,out string pass);
    HelloServer:
    public class HelloServer
    class HelloServant extends _HelloImplBase
    public void getPass(String name,org.omg.CORBA.StringHolder pass)
    System.out.println("Server pass = " + pass);
    if (name.equals("lxh"))
    pass = new org.omg.CORBA.StringHolder("1234");
    if (name.equals("cbj"))
    pass = new org.omg.CORBA.StringHolder("5678");
    HelloClient:
    public class HelloClient
    public static void main(String args[])
    try{
    org.omg.CORBA.StringHolder Pass = null;
    if (args.length == 1)
    System.out.println("Client pass = " + args[0]);
    helloRef.getPass(args[0],Pass);
    System.out.println(Pass);
    } catch(Exception e) {
    When I run client main method with parameter "lxh",I will get a error says the getPass() parameter which has given is wrong.
    How to use the out parameter in client?

    Does this error only occurs if you pass "lxh" or always?
    Did you try passing a StringHolder Object rather than a NULL Object?
    Perhaps you can post the error message!?

  • How to use the out parameter of a transformation

    Hi All,
    I have a requirement where I need to move all the transformations from process flows to map.SO for each transformation I need to have 1 map which calls this transformation.I have 1 transformation which has both input and output parameter.If I use this transformation in mapping then how to use the out parameter of thsi transformation.This out parameter needs to beused in other mappings.Can soemone please help me.
    Thansk in advance

    Hi,
    I'm not quite sure what you are trying to do.
    What works: Connect the outgroup of a pre- or post-mapping process operator to the mapping output parameter operator..
    What does not work: Connect the outgroup of an operator that can return more than one row (e.g. table operator, filter, joiner ,...) to the mapping output parameter operator. The mapping output parameter just returns "one row", like a pl/sql function call.
    You cannot pass a "data stream" from one mapping to another. Maybe the pluggable mappings is what you are looking for.
    Regards,
    Carsten.

  • How to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part

    Hi,
    I want to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part like mentioned below:
    http://server/pages/Default.aspx?Title=Arup&Title=Ratan
    But it always return those items whose "Title" value is "Arup". It is not returned any items whose "Title" is "Ratan".
    I have followed the
    http://office.microsoft.com/en-us/sharepointserver/HA102509991033.aspx#1
    Please suggest me.
    Thanks | Arup
    THanks! Arup R(MCTS)
    SucCeSS DoEs NOT MatTer.

    Hi DH, sorry for not being clear.
    It works when I create the connection from that web part that you want to be connected with the Query String Filter Web part. So let's say you created a web part page. Then you could connect a parameterized Excel Workbook to an Excel Web Access Web Part
    (or a Performance Point Dashboard etc.) and you insert it into your page and add
    a Query String Filter Web Part . Then you can connect them by editing the Query String Filter Web Part but also by editing the Excel Web Access Web Part. And only when I created from the latter it worked
    with multiple values for one parameter. If you have any more questions let me know. See you, Ingo

  • Two commands in the report using the same parameter - fail under Java

    I have a report that contains 2 SQL commands.
    Both of these commands use one parameter X of type Number in their 'WHERE' clause.
    When i'm viewing the report in CR 2008, i'm asked for a value of this parameter and all data is filled in the report - OK
    The problem occurs when the same report is printed through Crystal Java Runtime:
    Report is printed without data! - it's empty.
    What we noticed in the debug information thrown by the Crystal libraries is that parameter value is set only in one of these commands:
    Original statement 1:
    select a.something
    from ANM_T a
    where a.anmid = {?PARAMETER01Id}
    Original statement 2:
    SELECT * from ANM_T a
    WHERE  a.anmid={?PARAMETER01Id}
    OUTCOME of Statement 1:
    select a.something
    from ANM_T a
    where a.anmid = 0
    OUTCOME of Statement 2:
    SELECT * from ANM_T a
    WHERE  a.anmid=9825
    In above example we may see that crystal set the value only in the second statement - first one got 0 - i suspect its some default value.
    Parameter in the Java code is set in the right way. In case of using only one statement it works. If we use two separate parameters (whose values are equal ) it also works.
    // we have also the loop over the parameters
    ParameterFieldController paramFieldController =
                    report.getDataDefController().getParameterFieldController();
    paramFieldController.setCurrentValue( "", paramName, paramValue );
    What is strange for me is that Crystal Reports enables to use the same parameter in two commands but if you edit one of them you may change the type of this parameter for a command ( for example from Number to String) but the parameter type in the second command remains unchanged ( it's strange because in my opinion it is the same parameter). In the Field Explorer under the Parameter Fields i still see one parameter of type used in the second command.

    Hello all,
    We have prepared some sample code to illustrate the issue.
    We have modified the sample application (Link: [http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/c07fec3e-3e11-2c10-1991-8c0fb0b82b75]) to that it also changes the parameter value. Parameter is used in two commands saved in report.
    The code changing the parameters value looks like this:
    private static void changeParameters(ReportClientDocument reportClientDoc) throws ReportSDKException {
              DataDefController dataDefController = reportClientDoc.getDataDefController();
            Fields fields = dataDefController.getDataDefinition().getParameterFields();
            for( int i = 0; i < fields.size(); i++ ){
                Field field = (Field)fields.getField( i );
                if( field.getKind() == FieldKind.parameterField ){
                            setParameter( ((ParameterField)field).getName(), "9825" , reportClientDoc);          
    private static void setParameter( String paramName, String paramValue, ReportClientDocument document ) throws ReportSDKException {
         ParameterFieldController paramFieldController =
                    document.getDataDefController().getParameterFieldController();
         paramFieldController.setCurrentValue( "", paramName, paramValue );
    We have tried the following codes to change the connection info used in commands:
    Attempt 1
              Tables tables = databaseController.getDatabase().getTables();
              //Set the datasource for all main report tables.
              for (int i = 0; i < tables.size(); i++) {
                   ITable table = tables.getTable(i);
                   //Keep existing name and alias.
                   table.setName(table.getName());
                   table.setAlias(table.getAlias());
                   //Change connection information properties.
                   IConnectionInfo connectionInfo = table.getConnectionInfo();
                   //Set new table connection property attributes.
                   connectionInfo.setAttributes(propertyBag);
                   //Set database username and password.
                   //NOTE: Even if these the username and password properties don't change when switching databases, the
                   //database password is *not* saved in the report and must be set at runtime if the database is secured. 
                   connectionInfo.setUserName(DBUSERNAME);
                   connectionInfo.setPassword(DBPASSWORD);
                   connectionInfo.setKind(ConnectionInfoKind.SQL);
                   table.setConnectionInfo(connectionInfo);
                   //Update old table in the report with the new table.
                   databaseController.setTableLocation(table, tables.getTable(i));
                   //databaseController.setTableLocation(tables.getTable(i), table);
    Attempt 2
             newConnectionInfo.setAttributes(propertyBag);
             connectionInfo.setUserName(DBUSERNAME);
             connectionInfo.setPassword(DBPASSWORD);
             //preserve subreport links
             SubreportController src = doc.getSubreportController();
             Map<String, SubreportLinks> linkMapper = new HashMap<String,SubreportLinks>();
             for(String subreportName : src.getSubreportNames()){
                 linkMapper.put(subreportName,
                     (SubreportLinks) src.getSubreportLinks(subreportName).clone(true));
             //If this connection needed parameters, we would use this field. 
             Fields<IParameterField> pFields = doc.getDataDefController().getDataDefinition().getParameterFields();
             replaceConnectionInfos(doc.getDatabaseController(), newConnectionInfo, pFields);
             IStrings strs = src.getSubreportNames();
             Iterator<String> it = strs.iterator();
             while (it.hasNext()) {
               String name = it.next();
               ISubreportClientDocument subreport = src.getSubreport(name);
               pFields = subreport.getDataDefController().getDataDefinition().getParameterFields();
               replaceConnectionInfos(subreport.getDatabaseController(), newConnectionInfo, pFields);
             //reconnect subreport links since when using replaceConnection links are erased
             for(String subreportName : src.getSubreportNames())
               src.setSubreportLinks(subreportName, linkMapper.get(subreportName));
    private static void replaceConnectionInfos(DatabaseController aDc, IConnectionInfo aNewConnInfo, Fields<IParameterField> aParameterField) throws ReportSDKException {
             ConnectionInfos cis = aDc.getConnectionInfos(null);
             for (IConnectionInfo oldConnInfo : cis)
               aDc.replaceConnection(oldConnInfo, aNewConnInfo, aParameterField, DBOptions._useDefault
                   + DBOptions._doNotVerifyDB);
    In both cases, the observed problem occurred. In one query the parameter was set properly, while on the other it was set to 0 (or empty string in case of string parameters). What is more, no data appeared on the print.
    Do you happen to know the reason of this issue?How can we fix the problem?
    Best regards
    Mateusz Błaż

  • How can I use the POST form in defining a SAMLCredentialMapperV2

    Hi,
    I am trying to configure the SAMLCredentialMapperV2 in our WebLogic Portal 10.3.2. There is a parameter called "POST form -
    The POST form used with this SAML Relying Party". Can anyone give me a hint of how I can use this form parameter, where I have to deploy this form
    and where can I find documentation about those parameters.
    Any help would be appreciated.
    Best Regards
    Edmund

    As far as i remember his parameter was optional
    http://www.oracle.com/technology/pub/articles/dev2arch/2006/12/sso-with-saml.html is probably a better article, dont know if has any updates since this was written for 9.2

  • How do I use the Japanese fonts in Font Book in a Pages document?

    How does one use the Japanese fonts in Font Book in a Pages document. Pages has its own fonts but I cannot get the Japanese fonts into it.

    To type japanese on a computer you change the keyboard, not the font.  Go to system prefs/keyboard/input sources and add Japanese/Kotoeri to the list, then select Hiragana in the "flag" menu at the top right of the screen, then type.  The font will take care of itself.
    http://redcocoon.org/cab/mysoft.html
    If you have any further questions, just ask.

  • How do I use the web cam on my pc? Hp w2007 I have windows vista

    How do I use the web cam on my pc?  Hp w2007 I have windows vista

    Hp w2007 is a HP monitor without webcam ...
    Where is the webcam?
    V.
    *** Say 'Thanks' with Kudos ***

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

Maybe you are looking for