How do I use the USB port on my MBP for audio output

I am a fairly new commercial sound provider running live sound and the occassional itunes type playback at events. I currently use a Y cable from the headphone output of my MBP osX into the RCA inputs on my audio mixer. On an older HP laptop I was able to use a USB output into the USB input of the mixer and the sound was a lot better in quality. I wish to do the same using the new MBP but when I plugged into the right side USB port I received no audio output. What am I doing wrong? Thanks howardfrom nh.

Have you gone into the Sound/Output system preferences to see if your mixer shows up there as a valid output device and if it does selected it there? If it doesn't appear, have you confirmed with the manufacturer of your mixer that it is compatible with Macs and if so asked if there are any drivers you need to install?
Regards.

Similar Messages

HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/

Is it safe to use the USB port in my car to charge my iPhone 5s or do I need to buy a car charger?

Is it safe to use the USB port in my car to charge my iPhone 5s or do I need to buy a car charger?

Check car manual to see if it supports charging ,some do not
or use a USB 12 volt plug in for the "cigarrette lighter" socket and plug into that ,probably a better solution

I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot. I have been able to do this in the past as recently as a few weeks ago.... Help please..

I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot. I have been able to do this in the past as recently as a few weeks ago.... Help please..

Thanks Eric for responding.
I checked and it does not appear in the Applications folder.
I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death).
One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
Thanks again.

How can i use the parallel port

I was wondering how to adress my PC´s
parallel port. I did'nt find a suitable
VI in the palettes.
Do I have to read/write somehow directly
to the port adress in memory 0378 ...?
If so, how can this be done ?
Thanks for any help,
Holsch

Use VISA to read/write to the parallel port just like you would read/write
to the serial port. I would staty away from the inport/outport stuff. I believe
there's some articles in the KnowledgeBase if you get stuck.
[email protected] (Helmut Hullen) wrote:
>Hallo, Holger,>>Du meintest am 29.07.00 zum Thema how can i use the parallel
port>> I was wondering how to adress my PC's>> parallel port. I did'nt
find a suitable>> VI in the palettes.>>Look at "in port" and "out port".>Under
Windows NT/Windows 2000 you need a special library for direct port >access,
look for "hwaccess" or "accesshw".>>Viele Gruesse!>Helmut>

Acquiring Images using the USB port

I want to acquire Images using the USB port of the PC. Is it possible to acquire images using the USB port and analyze the image using IMAQ library. If we use the USB port direct then we may not need the IMAQ vision acquisition card.

Try Irene's drivers (see previous answer above), or Peter Parente's webcam drivers (www.mindofpete.org).
cheers,
Christopher
Christopher G. Relf
Certified LabVIEW Developer
[email protected]
International Voicemail & Fax: +61 2 8080 8132
Australian Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - attached file(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsib
ility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Connecting wirelessly using the USB Port

I recently saw a small device at Best Buy that allows my computer to connect remotely to the internet (via cable modem) using the USB port that costs only $60. Do you know of this and can you comment?

Are you trying to do this because your Ethernet port is broken? Is it a wireless device? Can you link to a product description?

How do I use the apple gift cards in passbook for a purchase in the apple online store.

How do I use the apple gift cards in passbook for a purchase in the apple online store.

Hi Ron2002,
Click this link and redeem your Apple Store Gift Card:
http://store.apple.com/us/browse/home/giftcards/redeem
Be sure to sign to your Apple ID.
Cheers!

Since I've updated to iOS 6 I am unable to use the next/back buttons from Headphone for audio book chapters.

Since I've updated from iOS 5 to iOS 6 I am unable to use the next/back buttons from Headphone for audio book chapters.
This is working fine for albums but are broken for audio books.
The back button refers always to the first chapter of the audio book (very annoying if you are in the middle of an audio book) and the nex button goes one level higher back to the selection of the audio book itself.
In iOS 5.0 it was still possible to navigate throught the audio book chapters using these buttons.
This still happens in iOS 6.1.
Is this a known bug?
Does any solution exist?
Thx,
Oliver

To gdgmacguy your a f****** idiot for one I'm having the same problem as pennymar. And you tell me to quit whinning. You got more problems then the iOS 6 you did not answer my question nor the other 13 or whatever you replied to within a 30 min time frame. You must got nothing better to do then to harass people and to pretend you know something about apple products. Which you don't from what I've read the other advices you should have gave to other people. But you didn't you replied a question back to the people asking a question. So if your not gonna use these community forums the right way don't use them at all.

How do get my iphone 4 to be recognized by tvs using the usb port

When i connect my iphone 4 through the usb port of tvs it is not recognized.

You need an AV adapter and then you can connect via HDMI

Using the USB port for an external HD dumb question

OK. Forgive a possibly really dumb question here...
My external HD has a USB 2.0 interface and I hooked it up to the USB port using a cable that came with an old USB 1 hub I'm not using right now.
My dumb question is this: is there such a thing as a USB 2.0 cable? Or are the USB cables all the same?
Also, how long should it be taking to transfer 12.1 GB of data (about 9,000 photos) from my external HD mounted on the AirMac base station to my MBP? There are still 48 minutes left and it seems an awfully long time for 12.1 GB of data. That's why I was wondering if the cable could be an issue...
Thanks,
doug

I am suspecting now that my HD might really have been a USB 1.0 drive...
doug

I Need Use the USB port and CDROM from iManager

Originally Posted by AndersG
Crsven,
> Now, I need access through of imanager the CD-ROM or the USB (Pen
> Drive) and I don't see, I don't access, pls, how I can see they.
Not sure what you want? What do you want to do with CD/USB in iMAnager?
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Discover the new Novell forums at http://forums.novell.com
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
Enhancement Request
Ok. I need install the license that I have in the Pen drive, but the iManager only see the unit's A, C and SYS. Not see the CD-ROM. I search with the file manager the USB port with by my pendrive or the CDrom and don't found. I don't have floppy for install and I think that no is necesary install a floppy (is obsolete).
Thanks
Saludos(Regards)
Rafael Sarramera

190.36.1.1 is probably the WAN address of your firewall which will then be NAT to your server
So currently from outside your network, if you browse 190.36.1.1:8008 you would then reach your remote management screen.
This is therefore not the correct IP address, you need the internal LAN address of the server to enter into your workstation NW Client box
Splash
>>> crsven<[email protected]> 08/03/2008 17:46 >>>
AndersG;1484107 Wrote: > Crsven,
> > Ok. Pls. Could you help me to config or where I can read that
> > information. I treated of connect and I can't connect to server with
> > IP.
> >
> Assuming a local workstation? Make sure you have an IP address bound> on
> the server. I also assume that you have a Windows workstation with the
> NW client installed. When you get the login window, leave tree blank,
> enter the server ip in the server field and provide username and
> password. If you get that to work, then we can take it from there.
>
> - Anders Gustafsson (Sysop)
> The Aaland Islands (N60 E20)
>
> Discover the new Novell forums at http://forums.novell.com
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> 'Enhancement Request' (http://support.novell.com/enhancement)
You assume good, but I leave Tree blank, the context blank and in fieldserver I use the address Ip 190.36.1.1, that is the ip addressconfigured for the conection with the remote manager of Novell(190.36.1.1:8008).
I think that the config that I need is in the server.
Thanks-- Saludos(Regards)
Rafael Sarramera------------------------------------------------------------------------crsven's Profile: http://forums.novell.com/member.php?userid=7705View this thread: http://forums.novell.com/showthread.php?t=314402

How can I test the usb port on my Time Capsule to see if it is working?

Ever since lightening struck nearby (which took out our internet and copy machine) the printer I had connected to the usb port on my Time Capsule in my office has has failed to print through the TC. I can plug the printer directly into my MacBookAir and can print just fine. So there is nothing wrong with the printer nor the usb cable.
I've turned off and unplugged the printer with the usb cable connected & disconnected to the TC, no change. I've unplugged the TC, no change. I've opened the printer utility several times, and always get the "offline" error. I open the print queue, and it says the printer is not connected. I reinstalled the driver for the printer, still the same thing.
I'm starting to wonder if the usb port on my Time Capsule got fried. Any help anyone can give in trying to see if the usb port even functions anymore would be greatly appreciated.
My Time Capsule is model no. A1409.

Power is not likely to be killed .. it is the data components that are more fragile.
So you do have power which as you say is why the USB flashes.. but you don't have signal.
The only other thing you can do is use USB powered hub.. if you have one handy.. but I would not go out and buy one.
A damaged board is impossible (at cost less than replacement TC) to repair. And repairers do not like working on stuff damaged by lightning as components that did survive were stressed.. the transistor junctions become liable to fail at any time.. so you repair it and it just keeps coming back as not working. Sorry if you cannot use it without USB junk it and buy a replacement. A second hand Gen3 is about the best of them it seems.
You can also buy an ethernet to USB print server.. but a new ethernet or wireless network printer is probably near to the same price.
You can hunt ebay for second hand USB print servers.. or airport express, extreme or TC.. often you can find something suitable for just a few dollars if you shop well. Since you don't need the latest greatest to do this sort of job.. and people are disposing of things like USB print servers as soon as they buy network printers.

With the original ATV is there a way to use the usb port with external hard drive?

Is there a way to use the usb with ATV1 and external hard drive?

I have the same question and refuse to beleive that Apple would put the USB port there for a HD and not be able to use it for that purpose.

W4 Windows tablet - any way to charge while also using the USB port?

I have an Acer W4 tablet with Windows 8 and I want to keep a USB printer and the USB charger attached to the tablet at the same time, but since it only has one USB port I cannot seem to make this work. I have tried an external, AC-powered USB hub which also charges attached USB devices, but it seems like the tablet won't charge when the USB port is in "host" mode, which it needs to be to talk to the printer. Anyone have a workaroud (hardware or software) for this problem? Thanks

I think the end of this thread:http://community.acer.com/t5/Windows-Tablets-and-Convertibles/how-to-charge-the-W4-820-tablet-while-data-transfer-is-going-on/m-p/271906/highlight/true#M11301has the most current info on it. Not easy but theoretically can work.

How do I use the USB port on my MBP for audio output

Similar Messages

Maybe you are looking for