How do I use the VFX effect in/out times?

In iMovie HD 6 -- I have tried to set the effect in and out times on a single clip, but for some reason the effect either lasts the entire clip, or not at all. Also, wondering if there is a way to get an effect to last across two clips.
Thanks!

You double click the cell the product is to be placed in.
Then click the "=" from the little bar that appears above the numeric keyboard.
Then click cell B4. That should place its reference in the bar to the right of the equal sign.
Then click the "x" from the function guide next to the numeric keypad.
Then click cell B5.
Then click the "x".
Then click cell B6.
Finally click the green check mark on the right. Done.

Similar Messages

How can I use the free space of my Time Capsule as wireless HD ?

Hi,
Just set up a 2T Time Capsule and use it as Time Machine for my IMac and my MacBook.
How can I use the 1 Tb free space to ave data available from all my devices ?
Tks

thierry118 wrote:
Just set up a 2T Time Capsule and use it as Time Machine for my IMac and my MacBook.
How can I use the 1 Tb free space to ave data available from all my devices ?
Although it seems like you have a lot of extra space, Time Machine keeps versions, and if you want to take full advantage of the version history you should not worry about "extra space" because it will get used to provide safer coverage for the two Macs. If you had a Time Machine disk that fit your two Macs' hard drives perfectly, you would have no room for the version history, only room for the one most recent copy of each file. This can be a problem if you discover corruption that happened a while ago and cannot go back far enough in time to find an uncorrupted file.
Therefore it's better to not try and use up the "extra space" and let it be used for a longer, safer version history for your backups.
But like you, I want to use my Time Machine for additional network storage. So I plugged a cheap, compact hard drive into the Time Capsule USB port, and that shows up in File Sharing too. There is no need to buy anything fancier since it will be limited by both network speed and USB 2.0 anyway.

How can I use the same thread to display time in both JPanel & status bar

Hi everyone!
I'd like to ask for some assistance regarding the use of threads. I currently have an application that displays the current time, date & day on three separate JLabels on a JPanel by means of a thread class that I created and it's working fine.
I wonder how would I be able to use the same thread in displaying the current time, date & day in the status bar of my JFrame. I'd like to be able to display the date & time in the JPanel and JFrame synchronously. I am developing my application in Netbeans 4.1 so I was able to add a status bar in just a few clicks and codes.
I hope somebody would be able to help me on this one. A simple sample code would be greatly appreciated.
Thanks in advance!

As you're using Swing, using threads directly just for this kind of purpose would be silly. You might as well use javax.swing.Timer, which has done a lot of the work for you already.
You would do it something like this...
    ActionListener timerUpdater = new ActionListener() {
        public void actionPerformed(ActionEvent evt) {
            // DateFormat would be better, but this is an example.
            String timeString = new Date().toString();
            statusBar.setText(timeString);
            someOtherLabel.setText(timeString);
    new Timer(1000, timerUpdater).start();That code will update the time once a second. If you aren't going to display seconds, you might as well increase the delay.
The advantage of using a timer over using an explicit thread, is that multiple Swing timers will share a single thread. This way you don't blow out your thread count. :-)

How do I find and use the "Spotlight Effect" in PS6?

How do I find and use the "Spotlight Effect" in PS6? I was using it yesterday and now I can find it ... help!

Hi,
I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
There are also some presets under Presets including a Default Setting.

HT1349 How do I set up a speed dial on my iPhone 4s? I am used to the bberry where I just keep my finger on a number in order to dial. This is very useful in the car. How do I get the same effect on iPhone?

How do I set up a speed dial on my iPhone 4s? I am used to the bberry where I just keep my finger on a number in order to dial. This is very useful in the car. How do I get the same effect on iPhone?

I found a post from Alope that told me exactly how to fix it.
Go to:
Settings - General - Restrictions - put your pass code in - Facetime - turn the switch to ON
Worked perfectly to stop the message that said, Not authorized to do that!

Why are menus grayed-out in trial version? how can I use the effects then?

why are menus grayed-out in trial version? how can I use the effects then?

Every piece of software has a learning curve, and its own terminology. After Effects is a complex professional tool, used by home enthusiasts right through to feature film makers.
There's plenty of very user friendly video editing software that will do the tasks you've mentioned easily. Might I suggest Adobe Premiere Elements.
For the record, you can't apply an effect to anything in After Effects until you have selected a target layer in the timeline. This functionality is true of any video editing or compositing software I can think of,

How do I use the brush to paint in latest version of Photoshop CC ? I have a MAC with OS 10.10.2

How do I use the brush to paint in latest version of Photoshop CC ? I have a MAC with OS 10.10.2.
I clicked the brush tool, then clicked on color swatch that brought me to the colors and clicked OL... but not able to get the color I need.

Well if I follow him, he creates an Exposure Adjustment Layer.
Then he cranks up the Exposure, lightening the entire body, which he does not want. It's only the head.
So leaving the Exposure set to where he put it, he selects that adjustment layer, clicks on that white thumbnail mask first, then paints
using the brush and black. What this does is "hides" or Masks the exposure effect where he paints, it doesn't paint the picture black.
He finds having to "mask" the entire body a lot of work. So he changes the mask to black by inverting it, and changes the swatch to white.
Then being sure the black mask thumbnail is selected, he paints the head with the white color, punching a hole in the mask so the exposure setting comes through on the face.
Does that make sense?

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

How do I use the commands to start and restart the jmqbroker normally?

How do I use the commands to start and restart the jmqbroker normally?
Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
"jmqbroker" to start up. My screen hangs up and seems that the process
hangs up. The message is
[28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
[28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
The prompt is hanged until I press CTRL-C.
Then I got the following message:
[28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
[28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
connections ....
[28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
[28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
store...
[28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
up 0 files...
[28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
[28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
Then, I use jmqadmin to invoke the console, I can start the broker
again, it gives me
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
I used ps -def | grep jmq there is no process anymore.
Is it a bug? Would somebody have any idea on what went wrong?

'jmqbroker' is the command to start a broker.
When you type 'jmqbroker' in a command window,
unless you put it in the background, the shell
prompt won't return until the broker is shutdown.
So when you see 'Broker "jmqbroker" ready.', it tells
you that the broker is running and is ready.
When you CTRL-C the process, it has the same effect
as using jmqcmd to shutdown the broker. And so after that,
there's no jmq processes running since you have just
shutdown the broker.
Remember that the jmqcmd/jmqadmin 'restart' command is to
restart an already running broker. jmcmd/jmqadmin does
not support starting a new broker instance.
If you are using csh, end the jmqcmd command with an ampersand ("&")
to have the broker running in the background. An alternative is to
stop the process with Ctrl-Z then input the command "bg" to have that
process resumed in the background.
The problem with not being able to start a broker using the
administration console is a documented limitation of the product that
Yvonne also mentioned. Check the Administrator's Guide for that.

I have a short 3d video with a separate black/white alpha pass, how can I use the alpha pass as a mask?

I have a short 3d video with a separate black/white alpha pass, how can I use the alpha pass as a mask? I want to add a heat wave distortion to the whole video but not on the alpha pass area. How do I set this up?

Track matte:
http://helpx.adobe.com/after-effects/using/alpha-channels-masks-mattes.html#track_mattes_a nd_traveling_mattes
Start here to learn After Effects:
http://adobe.ly/AE_basics

How can i use the amp designer or pedalboard for software instruments in garageband 10

how can i use the amp designer or pedalboard for software instruments in garageband 10?
and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?

hongconga wrote:
I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
DRIVERS::
No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
(note "supported")
and
For the Mac::
Mac OS X 10.4.11 – 10.7.1
ask if their firmware currently supports OS X 10.9.x

How can i use a garageband effect on a live microphone while recording?

hi, i am recording a vocal track on garageband, using an m-audio fast track, does anyone know how i can use the effects of gb, so that i can hear them in my earphones while i am recording??? thank you!

Make sure you have GarageBand,s output set to what you have your headphone plugged into.
And turn on monitoring for the track.

How do I use the Japanese fonts in Font Book in a Pages document?

How does one use the Japanese fonts in Font Book in a Pages document. Pages has its own fonts but I cannot get the Japanese fonts into it.

To type japanese on a computer you change the keyboard, not the font. Go to system prefs/keyboard/input sources and add Japanese/Kotoeri to the list, then select Hiragana in the "flag" menu at the top right of the screen, then type. The font will take care of itself.
http://redcocoon.org/cab/mysoft.html
If you have any further questions, just ask.

How do I use the web cam on my pc? Hp w2007 I have windows vista

How do I use the web cam on my pc? Hp w2007 I have windows vista

Hp w2007 is a HP monitor without webcam ...
Where is the webcam?
V.
*** Say 'Thanks' with Kudos ***

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do I use the VFX effect in/out times?

Similar Messages

Maybe you are looking for