How do I use trains late for facebook

How do I use trains late with Facebook, have it in my apps, but can't seem to use with Facebook?

Your best place for app specific support is the developer of that app. I'd check on the Trains Late web page or see if they have contact info for support.

Similar Messages

  • How can i activate use cellular data for facebook

    how can i activate use cellular data for facebook

    pepaycustodio wrote:
    how can i activate use cellular data for facebook
    Settings > Cellular > Cellular Data: ON

  • How do i use MIB-2 for writing MIB for my application?

    I want to use the existing MIB-2 to write MIB variable for my application. The application is energy metering.So How do i use MIB-2 for writing MIBs for my application?
    Santosh Chavan
    IIT MADRAS.

    For others who do not know what an MIB is, here is link that shows some more information:
    http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/snmp.htm .   A quick Google of MIB did not turn up any useful information, but looking for SNMP quickly found this link. 
    It really turns out that I am not the person to help.
    It turns out that I am not the person to help, but I always want to know more as I may have a similar problem later.  I know from personal experience that it is easy to use a term commonly in a company or industry but have no one out side of that industry understand.  I was asking if that was such a term (hopefully with a little humor).  I'm sorry if my joke fell flat.
    I hope that you get an answer,
    Bob Young
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • As of 3/30 when using the App for Facebook, when I log off of Facebook, it keeps me permanently logged into Facebook. If I use Safari to log into Facebook, I have no problem logging off. Is there a problem with the Facebook App??

    As of 3/30/13, when logging off of Facebook using the Facebook App, it will not log me out. It is now permanently keeping me logged in. No problem logging off of Facebook when I do not use the App. Is there anyone that can tell me why this is happening and what I need to do to Logout of Facebook. I like using the App for Facebook but I also want to be able to log off, I do not like to stay logged in.  Is there something different with the latest Apple software I downloaded a couple of weeks ago, IOS 6.1.3?

    it also could be something different, if you try google hangounts. change password and log out it still recieves notifications. its how apples handles the "channel" notification system for apps that recieve notifications or do backroung sync, and im sure at some point that security hole will be a hijack point.  i think its called XO auth. and is why it can maintain session even after an apperant logout
    if you go to the app and it shows you have logged out but are still recieving notifications then that is evidence of the bug.
    also look and find the option for "keep me logged in" i remember in the past that would allow a autologin after logout. also if the app does NOT save the logout status correctly in its "memory" the above refereced system will auto login you with the XO app authentication.
    if there really is no keep me logged in option. then what crh24 said, they designed it delibertly to keep you logged in. though i never remember a problem on my ios 6,. are you on ios 7, bunny hop?

  • I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

    i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged  
    pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
    and i wnat to complete hardware exam of mac what should i do
    thanks
    vicckey

    GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
    If you are interested in becoming a certified Apple hardware technician, you can find information here:
    http://training.apple.com/certification/acmt
    Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
    I have no idea what "knowlaged" might be.
    Regards.

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

    This message refers to the VIs found at this link:
    http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
    How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

    Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

  • How do i use appl id for my phone?

    how do i use appl id for my phone?

    Sign into the device with the Apple ID.
    Reading the User's Guide might also allow you to ask a more intelligent question and have a much better understanding of how the device works.

  • How do i use my number for imessaging instead of my email

    how do i use my number for imessage instead of email

    Hello there, qbullard.
    The following Knowledge Base article reviews the process for adding your number to iMessage:
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

    how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

    I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
    The way I do it, is I assign all my drum tracks to a buss, say buss 1.
    Then, on buss 2, I assign it's INPUT to buss 1.
    So buss 1 (all the drums) are feeding into buss 2 simultaneously.
    Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
    You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
    I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

  • How can I use jbo:InputSelect for a char type filed?

    How can I use <jbo:InputSelect for a char type filed?
    I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
    There is a problem:
    If I use (in the "DataEditComponent.jsp" file)
    <jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
    to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
    Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
    I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
    I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

    If I were in your shoes, here's how I would do it:
    <%-- Assuming you have dsRoom and dsResponsibility --%>
    <%-- Select is an HTML tag --%>
    <select name="ROOM" size="1">
    <% char roomID =""; // Init your character var
    // Open a rowsetIterator to get the records and add them to the LOV
    <jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
    <% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
    // add the value to the LOV
    %>
    <option value="<%=roomID%>"><%=roomID%></option>
    </jbo:RowsetIterate>
    </select>
    If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
    //Set the current record's char
    char curRecord = (char)rowEdit.getAttribute("ROOM");
    // inside the iterate:
    if (curRecord == roomID) {
    <option value="<%=roomID%>" selected><%=roomID%></option>
    } else {
    <option value="<%=roomID%>" ><%=roomID%></option>
    Hope that helps!

  • HT204053 Hello, I have two iphones but one Apple ID. How can I use localization apps for a dedicated device? Tx

    Hello, I have two iphones but one Apple ID. How can I use localization apps for a dedicated device? Tx

    On the iPad open Settings/iCloud and delete the account using the button at the bottom. Once deleted log in using the other account. For iTunes Stores use Settings/iTunes & Apps Stores, tapp on the Apple ID at the top then sign out. Once done sign in using the other account. Once you are happy with the changes plug your iPad into your computer to update the backup.

  • TS3988 It seams that i have another Apple ID, how can i use only one for everything?

    It seams that i have another Apple ID, how can i use only one for everything?

    http://support.apple.com/kb/HT5622?viewlocale=en_US
    -The specific point:
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.

  • How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

    May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

    It Says :
    Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
    Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

Maybe you are looking for