How do I use voice commands with CC on my Mac?

Howdy all! Just made the switch to Adobe from Final Cut 7. Overall, I'm digging it a bunch.
However, there's one aspect of CC on my Mac that's vexing me.
As you may know, there is speech recognition / voice command software built in to Mountain Lion (it's been around for years, and many iterations of OSX). With this software, you can make any number of custom voice commands for another piece of software. For instance, in FCP 7, I can program the keystroke "l" (play track) to respond to the voice command, "Forward." (It can be any word or phrase you type in.) This works with other programs as well.
All well and good, and pretty dang cool. However, I can't make any voice commands work with any of the CC software (I've tried Premiere and Media Encoder so far). I'm curious if anyone else has had any luck, or, perhaps, that the ported interface from Windows to Mac has some layer of code that (probably inadvertantly) blocks voice commands from working with CC on a Mac.
Anyone got any tips? Tricks? Confirmation that this simply won't work on a Mac? (If the last, I'd love to know the "why" as well.)
Thanks!
Best,
Ian
2009 Macbook Pro, 2.8Ghz Intel Core 2 Duo, 8GB 1067 MHz DDR3 Ram, 1TB 5400 RPM hard drive, OSX 10.8.4.

There are none.
iPad has dictation only-no commands.

Similar Messages

At CRS-1,how can i use show command with pipe | ?

HI,ALL
when I use show command with pipe on the CRS-1,the command invalid
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |errors
                                                                   ^
% Invalid input detected at '^' marker.
========================================================
But Previously on the cisco 7609,I can use the show command
GZ-DM-SR-1.MAN.7609#show int | include line |err
Vlan1 is down, line protocol is down
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 interface resets
Vlan11 is administratively down, line protocol is down
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 interface resets
Vlan99 is down, line protocol is down
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 interface resets

RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |errors
                                                                   ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |?
|
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line | |?
                                                                    ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line | ?
begin    Begin with the line that matches
exclude Exclude lines that match
file     Save the configuration
include Include lines that match
utility A set of common unix utilities
<cr>
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |
% Incomplete command.
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |errors
                                                                   ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line | ?
begin    Begin with the line that matches
exclude Exclude lines that match
file     Save the configuration
include Include lines that match
utility A set of common unix utilities
<cr>
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |?
|
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line | include er$
Thu Jan 15 22:36:24.120 GMT
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line
Thu Jan 15 22:37:05.013 GMT
Loopback0 is up, line protocol is up
Loopback1 is up, line protocol is up
Loopback6 is up, line protocol is up
Null0 is up, line protocol is up
POS0/0/0/0 is up, line protocol is up (APS not Configured )
POS0/0/1/0 is up, line protocol is up (APS not Configured )
TenGigE0/0/4/0 is up, line protocol is up

Can I use, and how can I use voice control with my iPad 2?

Is it possible to use the voice control with my iPad 2? If so, how can I use it? Since there is no siri for iPad yet, I'd like to use something similar to it and I've seen this built in voice control before but I was not sure if it's possible with the iPad.

Not yet, however you can download the new google app. This offers voice seeking on the net.

How do you use Time Machine with more then one mac

I just bought a new external hard drive and want to back up my iMac & MacBook Pro using Time Machine. But I do not want to use my airport network.
I will keep the hard drive connected to the iMac, but want to, as needed, plug my MacBook Pro into the Hard drive to back up.
Is this possible? Do I have first partition the new backup hard drive?
Any help is appreciated... Jim

Ok... I am back again.
I decided to plug my backup drive into the USB port on the Airport extreme.
On my Macbook Pro, which I connect wirelessly, I was able to start Time Machine... Time Machine saw the backup drive and did a backup.. Yes it took a long time Anyway all is cool with that.
My iMac is connected to the Airport Extreme by Ethernet. On the iMac when I started Time Machine, it does not see the backup hard drive. I can see and share the hard drive... works fine. But no luck with TM seeing the hard drive on the iMac.
Questions is will Time Machine work with a computer that is connected to airport extreme by ethernet. If yes how o you set it up and what might be wrong??
I might mention that the reason I have the iMac connected with an ethernet cable and not wirelessly is because the iMac does not stay connected well to the internet and when it is connected has a very slow connection. My MacBook Pro is all the way across the house and has a great connection.
I have guessed the slow connection was because the Airport Extreme sits right next to the iMac and maybe there is some kind of interference.
Thanks.... any help is appreciated.

How I get started using voice input with mac mail?

Just got a new Imac. have had Apple computers for a long time. Want to start using voice input with mail. How do I get started?

Apple's voice input options are the following:
Dictation
This allows you to speak a phrase and have the system enter it as text in any text field, be it a name and address form or a text editor like Pages or Word. The settings for this service are in the Dictation system preferences, and by default you activate it by pressing the Fn key twice in a row and then speak the desired phrase after you hear the bing sounds.
Speakable Items
This option allows you to somewhat control the Mac's interface elements by speaking key phrases to the system. This option is enabled in the Accessibility system preferences, and is at the bottom of the listed services. In here you can turn on the service and calibrate it to properly hear your voice, set a "listening key" (similar to the Fn key for Dictation), and then enable various command libraries.

Using Voice command to call some one...

Hello,
On the key note presentation in June the Steve Jobbs had done he used voice command to call a person.
How do you go about doing the set up for that. I can not seem to do it.
Sean

I could swear he did because he made a comment along the lines that "today's technology" ...
I could be wrong but I can not quote his comment but I know he made a comment about it before he did it.....
Oh well. One would think with the issue of driving and cell phone this would of been included.
Sean

Replace Nuance Voice Commands with Google Voice Search

I would like to replace the Nuance Voice Commands with Google Voice Search when i press the call button on my bluetooth stereo headset.
I do not see a way to uninstall the Nuance Voice Commands...
I do not see a way to configure the phoe so that it uses Google Voice Search instead of Nuance Voice Commands...
Factory reset defaults the phone to Nuance Voice Commands...
I would like to press the call button on my stereo headset and have more voice commands than the Nuance app provides. Has anybody found a way to change this behavior without special access?
Sorry my phone is stock and no special access...

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I just tested it here and i get the same result as you but i'm swedish as well.
Not sure if this has to do with how Google Maps behaves in different countries but a Google search is made when you say a voice command that's not recognized by any of the apps you have for the watch. There's a discussion about the "Navigate to" not working here and it seems Google is looking into it.
What i've also noticed myself is that some apps actually give wrong information about which voice command you should use so sometimes you have to try another phrase than the exact one the app is telling you to use.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How do I use the commands to start and restart the jmqbroker normally?

How do I use the commands to start and restart the jmqbroker normally?
Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
"jmqbroker" to start up. My screen hangs up and seems that the process
hangs up. The message is
[28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
[28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
The prompt is hanged until I press CTRL-C.
Then I got the following message:
[28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
[28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
connections ....
[28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
[28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
store...
[28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
up 0 files...
[28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
[28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
Then, I use jmqadmin to invoke the console, I can start the broker
again, it gives me
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
I used ps -def | grep jmq there is no process anymore.
Is it a bug? Would somebody have any idea on what went wrong?

'jmqbroker' is the command to start a broker.
When you type 'jmqbroker' in a command window,
unless you put it in the background, the shell
prompt won't return until the broker is shutdown.
So when you see 'Broker "jmqbroker" ready.', it tells
you that the broker is running and is ready.
When you CTRL-C the process, it has the same effect
as using jmqcmd to shutdown the broker. And so after that,
there's no jmq processes running since you have just
shutdown the broker.
Remember that the jmqcmd/jmqadmin 'restart' command is to
restart an already running broker. jmcmd/jmqadmin does
not support starting a new broker instance.
If you are using csh, end the jmqcmd command with an ampersand ("&")
to have the broker running in the background. An alternative is to
stop the process with Ctrl-Z then input the command "bg" to have that
process resumed in the background.
The problem with not being able to start a broker using the
administration console is a documented limitation of the product that
Yvonne also mentioned. Check the Administrator's Guide for that.

How can I use Local SPAN with RSPAN ??

How can I use Local SPAN with RSPAN ??
I want to mirror traffics from ISP-A and ISP-B to Anomaly-detector module.
so I had configured like this...
C6500-A
vlan 1000
name RSPAN
remote-span
monitor session 10 source interface Gi5/1 - 2 rx
monitor session 10 destination remote vlan 1000
monitor session 20 destination anomaly-detector-module 3 data-port 1
monitor session 20 source remote vlan 1000
interface GigabitEthernet1/13
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1000
switchport mode trunk
no ip address
C6500-B
vlan 1000
name RSPAN
remote-span
monitor session 10 source interface Gi5/1 - 2 rx
monitor session 10 destination remote vlan 1000
interface GigabitEthernet1/13
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1000
switchport mode trunk
no ip address
end
but it was not working..
it wasn't any change of input packet hit count when
I'd enter a command 'show anomaly-detector module 3 data-port 1 traffic'
was upper configuration wrong..?
Can I use VACL configuration ?

try to change "monitor session 10 destination remote vlan 1000 " to "monitor session 10 destination anomaly-detector-module 3 data-port 1 " on C6500-A

Can I use Voice Commands (Speech) to control the DVD Player?

Problem: I want to insert a DVD in the the DVD drive and use voice commands to stop, pause, play, move forward, move back, and quit the DVD Player. Is this possible? If so how would I do this?
Thanks in advance for your help.
Jim Minor

You can create a speakable item. Use AppleScript Editor (Applications > Utilities > AppleScript Editor) to write the appropriate AppleScript to perform the desired action, and give it a name which is the command you want to speak. Then, make a subdirectory in the Speakable Items directory named "DVD Player" and copy your script to it. You should be able to speak the name of the script when DVD Player is in the foreground and have the script execute.
An example script (Play.scpt):
tell application "DVD Player"
play dvd
end tell
Other commands that the DVD Player application understands:
fast forward dvd
pause dvd
rewind dvd
stop dvd
step dvd
go to \[ main menu / title menu / subpicture menu / audio menu / angle menu / beginning of disc \]
press \[ up arrow key / down arrow key / left arrow key / right arrow key / enter key \]
open VIDEO_TS
open dvd video folder
play next chapter
play bookmark
play named bookmark
play video clip
play named video clip
exit clip mode
obscure cursor
eject dvd
The DVD Player application also has a bunch of properties related to chapters, titles, subtitles, etc.

How to execute a system command with call executable in teststand 4.2.1?

Hi All,
how to execute a system command with "call executable" step in teststand 4.2.1?
example as i want to quit a application.using "taskkill /f /im xxx.exe".And execute other system command(DOS).
BR
Johnny

Hi,
I want to run netstat -an | find "8080" command from command prompt using call executable in test stand. after that i would like take the std output to local variable.
Attachments:
callsettings.jpg ‏404 KB

How do I use my ipad with Apple TV?

How do i use my iPad2 with Apple TV?

If it's an ATV2 or 3, you can use AirPlay. AirPlay automatically becomes available when the two devices are on the same Wi-Fi network.
HOWEVER! You should be aware of that AirPlay is, in some circumstances, far inferior to VGA / HDMI-cabled solutions. Please see my posts at https://discussions.apple.com/message/18697551?ac_cid=sa123456#18697551 for more info.

How do I use apple remote with iPhone 5 ?

How do I use apple remote with iPhone 5 ?

Iphones dont have ir at all which the remote use for comm
Only option is to use a dock which have ir

When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

Hello Daijalove97,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
To use your Apple ID at the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In from the Store menu.
Enter your Apple ID and password, then click Sign In.
Click Review when asked to review your information.
Enter your billing information, a credit card will be required.
Click Continue when you're done entering your credit card and billing information.
Best of luck,
Mario

How can I use an iPad with two itunes accounts?

How can I use an iPad with two itunes accounts?
Hi there
My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
How do I do this please?
I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
Any advise please?
Thanks

You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
It's not meant to be a multiple user/multiple ID device.

How do I use voice commands with CC on my Mac?

Similar Messages

Maybe you are looking for