How do I veiw internal page on an airport extreme

how do I view an internal page on an airport extreme?

What model number of AirPort Extreme?
There are 3 passwords on an AirPort Extreme.......Base Station Password, Disk Password, Wireless Password. Which one of these are you asking about?
What version of AirPort Utility are you using?

Similar Messages

How-To Set Up with Uverse Gateway with Airport Extreme

I just spent hours figuring this out so I thought it would be helpful to someone. Maybe, maybe not. My goal was to get Back to My Mac turned on...but this should also be how you set up your wireless network if you have both an Airport Extreme and a Uverse Gateway.
As I was trying to setup BTMM, I got a "double NAT" error. To use BTMM, you have to use either Time Capsule or Airport Extreme, so that NAT has to be enabled. That meant I had to figure out how to turn off U-verse's. I looked through the settings but saw nothing about it. Several hours of research--and a useless support call to AT&T--I finally figured it out. Here's the configuration you need, in brief.
On the Airport Extreme, under Internet > Internet Connections, Connection Sharing must be set to "Share a public IP address". Then under the NAT button, Enable NAT Port Mapping Protocol must be checked.
Now, unless you doe rest of this configuration, you will get a double DHCP error. So, in the Uverse Gateway settings, you must do this:
1. Under Wireless, click the option to DISABLE wireless. Click Save.
2. Under Firewall, click the option with DMZ in the name. On this page, choose your Airport Extreme (whatever you named it). Then scroll down and choose the option that says "Allow All Applications (DMZPlus Mode)". Save that configuration. DO A HARD RESET ON THE AIRPORT EXTREME. Then that should enable a single NAT protocol and BTMM will be on its way. And your wireless network will be set up properly.

Will the above method work on a set up with a Verizon Modem to a DLink wireless router to a Time Capsule?
I know of no reason why it would not. Whenever there is another router ahead of the Time Capsule, the Time Capsule must be configured in Briddge Mode. My network has 4 routers. The "main" router is setup to handle DHCP and NAT and the other 3 routers are setup in Bridge Mode. No problems.
Weird thing is Air Video set up tells me I have a double NAT
Double NAT occurs when you have two routers on a network both set up to handle DHCP and NAT services. Your Verizon "modem" may be a gateway....a combination modem/router on the same chassis. If that's the case, then every other router on the network must be confgured as a "Bridge".
If you have the "main" router on the network setup to handle DHCP and NAT, in theory, you can have multiple other routers on the network as long as they are all setup in Bridge Mode. In Bridge Mode, DHCP and NAT are turned off, so the other routers simply pass through the network information from the main router. It's by far the easiest way to configure multiple routers without having to go into special DMZ, port mapping, etc type of configurations.

How to connect my iPad, Brother printer, and AirPort Extreme?

How to connect my iPad, Brother printer, and AirPort Extreme?

I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings.

How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings. A simple set of instructions would be greatly appreciated.

How to Port Forward on AEBS

How you increase the strength / length of an airport extreme?

How you increase the strength / length of an airport extreme? I find it hard to use wireless internet

Please checkout the following Apple Support article on details on the many ways you can extend the wireless range of your current AirPort base station.

How set up Mac to stream photos from airport extreme to chrome cast on flat screen tv

how to stream photos from my Mac through AirPort Extreme router to chromecast on my flat screen tv

It is really the wrong product.. get an Apple TV.. they are designed with android and using android OS..
http://9to5mac.com/2014/02/09/how-to-setup-and-use-chromecast-to-stream-your-con tent-from-a-mac-and-ios-device/

HT4262 How can I connect 6 computers simultaneously to Airport extreme?

I have tried troubleshooting several ways and the some computers work and others don't. How can I connect 6 wireless computers to Airport Extreme?

Matt
Is it possible to speak on the phone? The situation is so convoluted it might be easier to help me get back on track in person. When I first had this issue I got on an apple site that had a chat room in which I typed in my problem. After several missives back and forth, the apple technician asked for my number and we spoke on the phone. The technician walked me through rebooting the actual airport plug (as opposed to the router box) and got me up and running. Do you know how I can relocate that chat site for technical support?
Thanks
David

How much RAM is built into the current Airport Extreme?

How much RAM is built into the current Airport Extreme (5th Gen)?

The only RAM that's likely onboard is whateve is used by the hardware and would be soldered to the board. One would need to disassemble it in order to determine what if any RAM is on the board. There is no user-accessible RAM.

How could I find what "letter" is my Airport Extreme g, b,or n?

How could I find what "letter" is my Airport Extreme g, b,or n?

Click the Finder icon at the lower left of the dock on your Mac
Open Applications > Utilities > AirPort Utility
Hold down the option key on your Mac while you double-click on the picture of the AirPort Extreme
What model number do you see?

How many devices can I use with an AirPort Extreme Base Station?

How many devices can I use with an Airport Extreme Base Station? Devices included a mac, iphone, ipad and pc laptops.

The AirPort Extreme will support up to 50 wireless devices and 200 wired Ethernet devices. I would imagine that this would probably be adequate for most homes.

How to connect a second computer to an airport extreme network

how do I connect my macbook pro to an existing airport extreme network. The AE basestation is showing up on the macbook but when I click on it it tells me its not connected ??

How can one determine if another person has leeched
onto an Airport Extreme network? Is there a way to
list users?
Run Airport Utility, Manual Setup, Advanced button, Logs and statistics, Wireless Clients.
...just changed my password and now my internet
connection is much, much faster...the wireless
broadcasting strength was fine, but, web pages had
recently slowed to a crawl...after changing the
password download speeds returned to normal...could
someone have been leeching on the network?
Sure, if you made a more secure password, that is quite possible. Minimum recommendation is the following:
1. use WPA
2. use a password with no word from ANY dictionary
3. use a password that is a combination of letters (upper and lowercase), numbers and special characters
4. use a password at least 12 characters long.
Better yet, use a "strong" password generator, such as the one at:
https://www.grc.com/passwords.htm

How can I change my IP address in airport extreme?

I have an airport extreme and I would like to change the IP address. There is a renew DHCP tab next to IPv4 Address in Airport Utility, but if I click it doesn't change anything. I'm very green on IP addresses, how can I change the IP address?

I am currently connecting using DHCP. The reason I want to change my IP address is for security.
I see, thanks for the explanation.
Every time you connect to a website, any website, your IP address is sent along with the content you request. There is no avoiding that. It's the method by which the content is delivered to you, analogous to a return address on an envelope you send in the mail. It's not required for websites to maintain a log your IP address or the content you requested. Most of the time it's discarded.
That IP address sent with your web page request is the address of your ISP's router - not your AirPort Extreme. Its address can be used to identify only a broad geographical area, and only your ISP will know the location of the specific equipment it's using. To truly obscure your location from even that broad category requires connecting through a web proxy server, of which there are many to choose from. The only IP address that could be "tracked" using one of them could be anywhere around the world, and would change so often as to be useless to anyone wanting to locate you.
In any event specifying a fixed IP address for your Extreme will not accomplish anything in the way of security or privacy, and would be no different than using DHCP.
If you are concerned about privacy in general that is a very wide-ranging subject. I'll start by suggesting you avoid Google and all its products and services, for obvious reasons.

Internal modem problems with airport extreme

I have an airport extreme with an internal modem. I am unable to connect to the internet via the modem. also i can't print (hp 2200d) with my ubs port and airport. any suggestions will be helpful.

Open the AirPort Admin Utility.
Click on the Internet tab.
From the "Connect using:" menu select one of the modem options.
Then finish the configuration with the information from your dial-up ISP.
This information is in the "Designing AirPort Networks" document which can be found on the AirPort Support page.

How can I open the ports with the Airport Extreme?

I have an Airport Extreme Base Station connected to a cable modem and I want to open the ports for the two Playstation 3's I connected to the Airport Extreme via Cat 6 ethernet cable. The first Playstation 3 will be used to play Call of Duty Modern Warfare 2 and the other Playstation 3 will be used to watch streaming movie from Netflix. Does anyone know if this can be done?

It is documented on Page 54 of Apple's "Designing
AirPort Networks Using AirPort Utility Mac OS X v10.5 + Windows" (direct PDF download link).
The public port and private port would be set the same value.

How do I find the WPA for my Airport Extreme?

How do find the WPA for Airport Extreme?

It asks for my SSID,
SSID is a fancy term for the actual name of a wireless network. So, you have two basic settings for a wireless network:
1) The actual Name of the network, or SSID. You set this up when you set up the AirPort Extreme.
2) The Password of the wireless network. You also set this up when you set up the AirPort Extreme.
I know the password, but it has two capitalized letters and in the Sony set up I can't find a way to get caps, just lower case
Then it would be a good idea to change the wireless network password to all lower case letters to allow things to match up.
It is also a good idea to keep the name of the wireless network....or SSID....simple.
Use only normal letters and numbers.....with no special characters like an apostrophe, dollar sign, asterisk, etc.
Keep the wireless network name short.....no more than 20 characters with no blank spaces in the name. Mine is twndb for example.
Same general guidelines for the wireless network password, except the password must have at least 8 characters.

How do I veiw internal page on an airport extreme

Similar Messages

Maybe you are looking for