How do I view entire signal in SignalExpress Playback mode?

Problem: Playback only displaying 1 block of samples instead of ALL the samples collected when I click "Run".
Setup:
Monitor / Record:
DAQmx Acquire Analog Input (Acq Mode: Continuous, 1k samples @ 10kHz),
Create Analog Signal (DC Signal 100kS/s, 1000 sample block size),
DAQmx Generate Analog Output (N Samples).
Playback: Same steps as Monitor / Record, except DAQmx Generate Analog Output is Continuous Samples 1k samples at 10kHz.
I have dragged my data from within the Logs folder per Help Documentation Instructions "5. Play Back the Data"
All of the data is successfully written to a TDMS file and converted to ASCII. How to I view the entire length in Playback?
Using: LabVIEW SignalExpress v2.5.1 Lite, NI USB-6221
Solved!
Go to Solution.

Hi barkeram,
Something you could do in the Playback mode is change the "Playback block configuration" in the "Playback Configurations" View to see and manipulate the entire data. For example, my default block size was 100 samples and my entire data contains 2800 samples (as shown by the number of iterations = 28).
I can change that to be Block Size = 2800 samples (which is my entire data) in which case I will have only one iteration. My data view will now show all my data rather than just a block.
You don't have to know before hand how much data the log file contains. Just multiply the default block size and number of iterations (when you select playback) to get the new block size and enter it in the Block Size field.
Message Edited by Nitin T on 04-14-2009 05:43 PM
Message Edited by Nitin T on 04-14-2009 05:45 PM
Attachments:
original.jpg ‏15 KB
modified.jpg ‏14 KB

Similar Messages

Read pressure signals using signalExpress

Hi, I don't have Pressure option under DAQMx Acquire -> Analog Input menu when I add a step to acquire pressure signals in SignalExpress 4.0. Anybody knows what extra module do I need to do so? Thanks. Cong.

Please post your question to the SignalExpress board. Very few users of it here on the LabVIEW board.

How do I view and manage certain files that I have stored in iCloud? I know that I can delete an entire backup, but is it possible to delete certain photos/contacts/notes etc. from that backup?

How do I view and manage certain files that I have stored in iCloud? I know that I can delete an entire backup, but is it possible to delete certain photos/contacts/notes etc. from that backup?

No.

Hi, I am going to an exhibition where there is no internet access but would like to show people around my website. I have added "scrapbook" but cannot work out how to 'save' an entire site for viewing off-line.

Hi, I am going to an exhibition where there is no internet access but would like to show people around my website. I have added "scrapbook" but cannot work out how to 'save' an entire site for viewing off-line. I thought there was a way to specify 1/2/3 clicks from home page etc. Please help. DAVID

OK, solved my own problem, but am posting here in case someone else has the same problem. It totally does not make sense, especially considering that it stopped after I reinstalled Lion, but the good thing is I have my files back.
I scoured the web and found a lot of other people are having the same problem. Most of them didn't have a clue how to fix it. This discussion was the most helpful to me: https://discussions.apple.com/thread/2569766?start=30&tstart=90
So, I went to the WD page and followed the instructions. The first suggestion was to plug it directly into a wall, because it may not be getting enough power from a power cord. I did this and it fixed the problem. Who would have guessed?
Anyway, if anyone else is having this problem, go to your manufacturer's website for help. Here's WD's help: http://wdc.custhelp.com/app/answers/detail/a_id/1164/related/1/session/L2F2LzEvd GltZS8xMzI2MzIzMjUwL3NpZC82dmo0blZOaw%3D%3D

On the Comcast email site, on the "Inbox Preview" page, if I click on "View Entire Inbox" or on a particular message, Firefox will just return me to the Inbox P

On the Comcast mail site, I cannot get past the "Inbox Preview" page. If I hit anything, including "View Entire Inbox" or on a particular message, or anything else, I'll just be returned to the "Inbox Preview" page. This only happens on Firefox. When it started happening, I finally gave up and tried Internet Explorer, which works fine. I'd prefer to access email on Firefox, so please tell me how to correct this.
I don't know if this is related, but immediately before this started happening, I may have hit something on my laptop, which caused the Comcast email screen to magnify to the point where I could not view the message window on messages. I couldn't figure out how reverse this, so I did the above (went to IE, which was fine). When I next attempted to access Comcast email from Firefoxe, the site was no longer magnified, but I had the above problem with being unable to get past the Inbox Preview page.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

How do I view more pages in the Folio Builder ACV preview?

I created a folio with an article that has two orientations, but when previewing it only shows the first page. How do I view more pages in the Folio Builder ACV preview?

You are viewing some very, very old videos. May I suggest watching my lynda.com course?
http://www.lynda.com/Digital-Publishing-Suite-tutorials/Adobe-Digital-Publishing-Suite-Ess ential-Training/149122-2.html?srchtrk=index:1%0Alinktypeid:2%0Aq:bob%2Blevine%0Apage:1%0As :relevance%0Asa:true%0Aproducttypeid:2
If you don’t have a subscription, this link will get you a one week trial? http://www.lynda.com/trial/boblevine
All that out of the way, clicking preview should take you to the page you’re on but still give you the entire article. Use your mouse to swipe up or down.

How can I view all my apple map pushpin Points of Intrest and pictures at once?

Been trying to find a way to view all my Apple Maps Points of Interest pushpins all at once on the map screen. As I drive along routing, or when I zoom in and out of map areas. Saved bookmarks shows a long list, but I can't figure out how to just view all the pushpins on the map, so I can access my favorite locations and notes as I drive or plan a trip.
Maybe create a map pushpin folder to save only pictures related to the saved map bookmarks. And save on phone or skydrive? I still just go by memory. But the list, notes and scenes are getting really numerous. RV campsites, fishing, biking, skiing, services, phone signal, shopping, wifi, laundry, jobs, pictures, and much more.
I have an old HP mini that I like and use with my iphone 4. Have no interest or extra money to be upgrading my devices every time the software/bloatware updates overload otherwise perfectly good phones and laptops. Hope to be able to share with others how to have their phones and computers work for them, instead of the other way around.
Might stay with iPhone and even buy an ipad if they become more univerally compatible, or switch to all windows devices. Not too happy with PCs bloatware programming these days either. My old windows 98 laptop runs some really powerful programs. Wonder how many people would buy Jeeps and such vehicles, if they could not easily drive them on regular city streets or highways?
first posting in online support community in 15 years. Home powered by Solar these days. Can even park next to a street light and charge batteries.
Thanks for reading and any useful info. will try not to lose my login info

Been trying to find a way to view all my Apple Maps Points of Interest pushpins all at once on the map screen. As I drive along routing, or when I zoom in and out of map areas. Saved bookmarks shows a long list, but I can't figure out how to just view all the pushpins on the map, so I can access my favorite locations and notes as I drive or plan a trip.
Maybe create a map pushpin folder to save only pictures related to the saved map bookmarks. And save on phone or skydrive? I still just go by memory. But the list, notes and scenes are getting really numerous. RV campsites, fishing, biking, skiing, services, phone signal, shopping, wifi, laundry, jobs, pictures, and much more.
I have an old HP mini that I like and use with my iphone 4. Have no interest or extra money to be upgrading my devices every time the software/bloatware updates overload otherwise perfectly good phones and laptops. Hope to be able to share with others how to have their phones and computers work for them, instead of the other way around.
Might stay with iPhone and even buy an ipad if they become more univerally compatible, or switch to all windows devices. Not too happy with PCs bloatware programming these days either. My old windows 98 laptop runs some really powerful programs. Wonder how many people would buy Jeeps and such vehicles, if they could not easily drive them on regular city streets or highways?
first posting in online support community in 15 years. Home powered by Solar these days. Can even park next to a street light and charge batteries.
Thanks for reading and any useful info. will try not to lose my login info

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

If you want to see what is in a file that is backed up by time machine then you have to restore the entire file. Having said that I have had good experience with Time Machine and individual files... if the file is there then all of it's components are almost for sure there. A way to get around this in Aperture would be to use referenced images. The images then still exist as individual files and can be backed up and restored individually. You would have to do so on a file by file basis though and your album information would still only be saved within the Aperture library.

How I can view more than 1 page at once on my screen with "PAGES" 5.5.2?

Hello, I have a iMac 27" and would like to know how I can view more than 1 page at once on my screen with "PAGES" 5.5.2?
In the past one could do this by clicking in the "zoom" field on "PAGES", but ever since Apple have seemed to "simplify" PAGES.... well, I'm spending more time searching than working...
Can anyone help? I'm going nuts with this issue.
Thanks.

Hi viking.
Just to keep you informed, it's the least I can do after the time you spent helping me.
The best solution I have found and it works excellently is the following:
- I installed VMWare on my iMac.
- Created a virtual machine and installed OS X7.0 on it.
- I "imported" or reformatted this virtual machine with an image disc (a DMG) of my entire système installed on my previous Mac (which was running OS X7.5 and had iWorks installed on it)
The result is fantastic.
I now have a virtual machine running Mac OS X.7.5 on my iMac (which is running Yosemite). As, I also managed to import into this virtual machine my image disk (DMG) of my entire MacBook Air (which had MacOS X7.5 and had all apps including iWorks) I can use Iwork just like in the "good old days" !!!
So I now simply jump from one to the other, its perfect!
Thank you very much for the time you spent helping.
Have a great day.

In iTunes 11 how can I view a playlist in a separate (new) window?

In iTunes 11 how can I view a playlist in a separate (new) window? I always did this by double-clicking the playlist. That doesn't work now!

found it - at least this is part of a solution -
http://www.betalogue.com/2012/12/04/itunes-11-edit-playlist-to-work-around-the-s ingle-window-limitation/
while the discussion in the link (here in this reply) does not tell us how to open a new window - it does tell us how to view any particular playlist and the entire library list at the same time in a split-window view - but there still does not appear to be a way to open two playlists at the same time.?

How can i view more of the info in mobile password manager?

Hi all,
i have the mobile password manager app on my android phone. i have never found out how i can actually get it to function satisfactorily by alllowing me to view entire site addresses, nor user names.
I have tried pressing the top bar in between the headings to see if i can move a heading over to reveal more of a column, but cannot.
It is extremely difficult to use this app, and i usually find it far more difficult than is worth it. I end up actually opening up my computer in order to view my passwords via saved passwords instead!
How i wish to find a way to see what i am looking at! As it is now, i only see a huge list of mysterious first letters of everything.
Thanks for any help!

hello coatli, addons are written by third-party developers - so in chase you'd have any suggestions for improvement please contact its author directly through the support mail address provided at: https://addons.mozilla.org/en-US/android/addon/mobile-password-manager/
one thing you could try though is to press the menu button and use the "search in site" functionality of firefox for android to navigate to the right site/username...

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

How can I view ipad screen on computer, when I pad display is broken but internal system works

how can I view ipad screen on computer, when I pad display is broken but internal system works

THIS WORKS FOR ME
ON MAIN SCREEN GO INTO VIDEOS THEN SETTINGS ON NEXT SCREEN
SET TV OUT TO EITHER "ASK" OR "ON"
TV SIGNAL SET TO PAL
FIT TO SCREEN SET TO ON
REMAINING SETTINGS TO OFF
CONNECT TO TV SCART OR RED,WHITE YELLOW SOCKETS WITH IPOD/TV LEAD AND AWAY YOU GO.

How to build View that join 2 tables that one of them exists twice in join

Hello ,
I want to create a database view (in CRM) which joins
the following tables : but000 , but050 , but000 again .
but000 holds BP general data (including BP name).
but050 holds the connection (relationship) between two BPS.
I want to build a dictionary view that shows a relation between
two BP and I want also to see their names ... that's why I need
but000 twice ..
I didn't manage doing this in SE11 (like I can do it with abap code).
I need this view in order to use it in a search help I need to build.
Does anyone know a way to build a view like this ?
If it is not possible how can I build a search help that shows
relation with names ?
Please , help .
Thanks ,
N.S.

Creating a Database View
Procedure
1.Enter an explanatory short text in the field Short text.
You can for example find the view at a later time using this short text.
2.Define the tables to be included in the view in the Tables field of the Tables/Join conditions tab page.
Keep in mind that you can only include transparent tables in a database view.
3.Link the tables with join conditions.
If there are suitable foreign keys between the tables, you should copy the join conditions from these foreign keys (see Foreign Key Relationships and Join Conditions).
Place the cursor on a table name and choose Relationships. All foreign keys to other tables defined for this table are displayed. Select the foreign keys and choose Copy. The join condition is now derived from the definitions in the foreign key.
If you only want to see the foreign key relationship existing between two tables, you must first select these two tables (click on the first column of the input area Tables) and then choose Relationships.
4.On the View fields tab page, select the fields that you want to copy to the view.
Choose Table fields. All the tables contained in the view are displayed in a dialog box. Select a table. All the fields contained in this table are displayed. You can copy fields by selecting them in the first column and choosing Copy.
You can also include an entire table in the view (see Includes in Database Views).
5.On the Selection conditions tab page, you can (optionally) formulate restrictions for the data records to be displayed with the view (see Maintaining Selection Conditions for Views).
The selection conditions define the data records that can be selected with the view.
6.With Goto ® Technical settings, you can (optionally) maintain the technical settings of the database view.
You can define whether and how the database view should be buffered here. Proceed as for the technical settings of a table (see Maintaining Technical Settings). Note that only the settings for buffering can be maintained for database views.
7.On the Maintenance status tab page, select the maintenance status of the database view.
If the view contains more than one table, the maintenance status read only cannot be altered.
8.Save your entries. You are asked to assign the view a development class.
You can change this development class later with Goto ® Object directory entry.
9.Choose activate.
Girish

TableView in MVC - how to bind view to controller data?

Hi,
I have a default view in my BSP with a tableView on it. I have set the table and iterator variables. In the controller DO_INIT I am selecting the reqd data - how do I pass this data to my table view?
I have created a iterator class and implemented the required methods - how should I use this iterator class to move the data to the view.
In the DO_REQUEST method I am setting the attributes for the view - the table values and also iterator attribute, but its not working...
Thanks
Kiran

All right we will try this one question at a time:
>How do I use the iterator, where do I implement the std. methods of the iterator interface.
I think that has already been answered in another thread after your question. But just to be clear, the iterator is generally a completly separate class that implements the interface IF_HTMLB_TABLEVIEW_ITERATOR. I said generally, because technically this can be any object that implements this interface. You could implement this interface in your model, your controller, or your application class - but this is not advised. I like to create a separate class and instaniate it either in my model or my application class. I store the object reference as an attribute of the hosting object. This makes the iterator easily accessible when you need it.
>How will my view know that it has to use the iterator class that I create?
It doesn't. Nor does it need to. The view has nothing to do with the iterator. The iterator is not a general method for generating Extension Elemetns (that is what the BEE is for). The iterator class is specific to the element htmlb:tableView and can only be used with this element. The Iterator instance is passed into the tableView during the definition of this element in the view. The class behind the tableView will then use and interact with the iterator class at the correct times. The table will pass the correct data into the iterator object so that the iterator can pass over either the column, the row, or the cell (the three different methods of the interface) and change the rendering of the tableView.
>I am new to MVC and dont know how to create biding between view & model attribute.
Yes Data binding is done between a view and a model (the model's attributes) not the controller. Data binding is very useful as metadata about fields can be consumed automatically by UI elements in the View. It also handles Input Handleing for you. I can't explain the entire concept of MVC and databind in a thread posting - as that wouldn't do it justice. However there are blogs, on-help and chapters in certain BSP Books dedicated to just that topic.
>Finally is the model class & application class one & the same?
No they are very different objects with different purposes. Application classes existed before MVC was supported by BSP. You can have one and only one application class per BSP application. They are used in stateful applications to store data and object references over the entire lifetime of the application. They can also be holders for application logic that spans the entire application. However since the introduction of MVC (in release 6.20) they should take a back seat to full MVC. MVC separates the presentation logic (view), flow and eventing (Controller) and Application Logic (Model) into separate objects. In a BSP application you can have 0:n model objects. Technically a model class is any standard ABAP class that inherits from CL_BSP_MODEL2. You create them in the ABAP Editor like any other class. However the inheritance has methods that can be called by the BSP and MVC framework to perform functions like data binding.

How do I view entire signal in SignalExpr​ess Playback mode?

Similar Messages

Maybe you are looking for

How do I view entire signal in SignalExpress Playback mode?