How do I view error logs

WHen I shutdown, sometimes I see an error pop up quickly as its shutting down. Its too fast to read. I have a weird issue tht when I reboot/shutdown it takes me to the log off screen first, where I then shut down. Like to fix this.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Event in "view error log"

    Hi,
    I am using sun web proxy server 4.0.3 for windows (windows 2000). I used 4.0.2 but I have got some problems with cpu usage (process usage 100 %...).
    We are using Etrust Antivirus and recently I have got some problems when I am downloading new signature. Sometimes I can download new signature sometimes not.
    In Server status, view error log, I have severals :
    "[08/Sep/2006:12:34:53] info ( 3520): CORE3282: stdout: gc channel: ftpav.ca.com anonymous:sunproxy@ "
    ftpav.ca.com is from where i'm downloading new signature.
    Anyone can help me to understand these messages ?
    Mems.
    PS: sorry for my english.

    I have the same problem with ftp. If I try to download the same file several times with help of ftp proxy, after third or fourth retry proxy rejects my connections.
    It writes the same line in error log, and file is not accessible anymore.

  • How to avoid Cost error log  while confirming production order

    Hi
    I dont want to post actual activity cost via production order activity confirmation. But i want standard value keys for my production duration purpose. So,i defined activites(strd value key) in work center without assigning cost center to that work center. While i confirm system throws erro log as Actual cost calculation contain errors and allows me to confirm the activities. I am doing MB31 and all CO settlement activities also. But when i try to close the order it says error log exists,so closing of order is not possible. How to overcome this problem as i dont want to capture any cost of activites via production order,but i want confirmation only for production analysis.

    Sudhar,
    You can make the operation not relevant for Costing by using a Customized Control key which is not relevant for Costing or else in the operation details you need to leave the "Costing relevancy" field blank.
    Regards,
    Prasobh

  • How Do I view text logs online? I know I can't see content, just need logs...THANKS!!!!

    I just need to get text messaging logs, HELP!!! I forgot how and it's extremely important! Thanks!

    To view text logs for the current billing period:
    Log into your on-line MyVerizon account
    Click the blue View Usage on the left-hand side
    Under the red Messaging, click the blue View Messaging Details
    To view your text logs for previous billing periods:
    When logged into your on-line MyVerizon account, click View Bill.
    Use the drop-down to select the appropriate bill.
    Click the Calls, Messages, & Data tab.
    Click the blue Messaging.
    Use the drop-down to select the appropriate line.
    Text message details are only available for the past 90 days.

  • Tx to view error log generated during a day

    hi all,
    can anyone pls tell me the Tx Code to view all type of error logs generated in a day.
    Regards
    vikas chhabra

    hi
    go to Easy access and  in application tool bar  press " SAP businees work place" or "control+F12" then select INBOX and
    select unread documents her eu can find the list if errors.
    reward me if it helps.
    regards,
    kishore.

  • Viewing Error Log

    I tried to preview a form, but it created a rendering error log.  When I viewed it, it looked something like the following:
    %PDF-1.6#%#####
    287 0 obj<</First 853/Length 1580/Filter/FlateDecode/N 99/Type/ObjStm>>stream#
    x&#1716;XMo#9##+##B.#]v#CBH#h#(#
    ##E9#h##&;(;####+##a>&#1693;A####]###s##&#1900;#
    %##2&#1448;#####Q#HE#####Z#bP6aH&#657;W#(&#445;D#=##8E###i#T#.####6###vZF#r###5##r1###0F&###[F+CZ&#"######
    Does anyone know what I can do to view the error log properly?
    Wing

    Dezso,
    I saved the log and renamed the extension to .pdf.  When I tried to open it with Adobe reader, a message indicated either damaged or file type not supported.
    Wing

  • How can I display error log of a standard program in my custom program?

    Hello Experts,
    I have a requirement where I submit a standard program from my custom module pool program as a background job. I use the TO SAP-SPOOL and thus the log is available when I go to SM37 and check the spool list. I have a requirement that I display this log in a tab within my module pool after the completion of the program. I am unable to fins a proper solution to this. I have both the spool number & the log number but I am unable to find function modules which will help me print them within my program. I found many ways to display it but as full screen and not with in my program.
    Could someone please help me with this.
    Thank You

    Hi,
    FM to read a spool request is "RSPO_RETURN_ABAP_SPOOLJOB".
    If the error log is displayed as a list output in the standard program, you can also use the syntax SUBMIT Program... and RETURN with export to memory addition.
    Then you will be able to read the list output from memory.
    Regards,
    Munesh.

  • How to check the error log in sharepoint 2013 online (office 365)

    I'm working with sharepoint online instance. I'm developing a sharepoint app using Napa 365 but its giving me some error with the correlation ID. Where i have to check the error log to get the actual error description?
    Please suggest me the right direction.
    Thanks in advance!

    Hi,
    As your environment is SharePoint Online, I suggest you can create a new thread in SharePoint Online forum, you will get more detailed information from there and more experts will help you.
    Office 365 Forum:
    http://community.office365.com/en-us/f/default.aspx
    Thanks for your understanding.
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Windows8 64 bit , EVENT VIEWER ERROR LOG

    I just got a new windows 8- 64 bit notebook, I have only just set it up yet in event viewer I get lots of Error messages one is HP error ID 2146233088, some are marked
    caution and others are critical and all seem to be under HP, I installed all windows updates and took out the 60 day trial of Norton internet Security 2013 and installed my own, my printer is set up with a USB cable wired, other than that I have only installed
    Microsoft office home and student which I purchased for 3 computers from a retail
    store, can anyone tell me why I would have so many errors showing up on a new computer.
     Thanks.

    Hello,
    The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
    Since your post is off-topic, I am moving it to the
    off topic forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Smart View error logging in to an application

    Hello,
    I successfully installed Smart View on a computer with Windows XP SP3. I can connect to the data source, but when I try to connect to an application, after entering the username and password, an error pops up: "Requested operation failed. Error: java.lang.NullPointerException"
    Do anybody know the issue?
    Thanks!

    Hi,
    Are you connecting to a Planning or Essbase datasource connection?
    Can you try connecting to other DS connections to see if it works?
    If connecting to an Essbase datasource, have you configured your APS correctly?
    Seb

  • Threads/Multiple classes - how to update progress/error log

    I have an application where multiple threads may be running at the same time. Different classes need to update the same error/progress log file. Should I create another class with a static method that takes strings as parameter? And then this static method would write the strings to the log file? What would happen if two threads access the static method at the exact same time? Need guidance.

    Write a controller/server to do the updates and have all other threads communitcate with it--do not have al lthreads trying to hit against the same file.
    Use logic silimar to a DB with memory caching of writes and having a dedicated writer sending them out to disk.

  • How can I view the logs in Parental Controls?

    I'm trying to monitor my children's internet use and iMessages on our laptop and the logs show there is activity. However, I cannot see anything when I click on the actual log entries. Is there something I'm missing? I'm having this issue with both internet and iMessage. Whenever I click on the iMessage log entry, a window pops up from iMessage as if I'm going to start a new conversation. Very strange.

    If your children are comp savy, it's possible that they have erased the logs.  You should set up parental control.  This way you can control all internet & comp usage.  Your children will not be able to erase or get into anything to erase if you do not make that option available. 

  • How can I view transaction log?

    Hello,
    I need to get statistics, about how much time does it take to execute each stored procedure (procedure start time, and procedure end time) on database 9i.
    Any ideas?
    Thanx,
    Romas

    Hi Romas,
    Take a look at the DBMS_PROFILER package. Functions in the package to look at are START_PROFILER and END_PROFILER. Once you are done, profiling, you can get a very detailed report on how long your procs took and much more stuff.
    Besure to install the DBMS_PROFILER package using "PROFLOAD.SQL" script (sys must install it). the PROFTAB.sql script will help you the info. All stated in the link below. Hope this helps.
    Here is the link to the documentation.
    http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_profil.htm#ARPLS039

  • How do I view/log Easy VPN users connections?

    I have a 2811 as an Easy VPN server. How do I view and log users who login via local accounts? This can be by either CLI or SDM access.
    Thanks
    Leigh

    Leigh,
    Long time no talk :-))
    On the 2811, do a "show aaa user all" and check if you are able to see the users connected. In case you dont see any outputs, enable AAA Accounting on the 2811 and then run the command again.
    Please refer the below URL for enabling VPN Accounting.
    http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541ba.html
    Let me know if it helps.
    Regards,
    Arul

  • Read Error logs after running the background jobs

    Hi,
    How to read the error logs after running the background jobs. In our scenarion we are running the COHV transaction to release the production orders in background. But we are not finding the error logs after background job. We would like to read the error logs and correct for further processing.
    Kindly suggest.
    Thanks & Regards,
    N. Laxman

    Hi
    you can check the  back ground jobs defined by any user in SM37 and where you can see the spool and job logs as well.
    plz check in your case and revert back
    Regards
    Anupam Sharma

Maybe you are looking for