How do i view itunes store and my library at the same time?

how do i view itunes store and my library at the same time?

apple killed this feature (and i'm really unhappy about this!!). please send a request to apple directly. they obviously don't read this forum. the more people complain about this, the better!
http://www.apple.com/feedback/itunesapp.html

Similar Messages

  • How do I view multiple images from different projects at the same time?

    Hello
    I've been trying to find the answer in the user manual, but no luck so far.
    I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
    How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
    Thank you
    Elizabeth

    Thank you again Tony
    I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
    Elizabeth

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • How can I connect to Oracle and SQL server at the same time?

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]
    As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
    SQL Server table to an Oracle table.
    1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
    separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
    your Oracle sales rep about it.
    2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
    version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
    and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
    check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
    as well as a Heterogeneous Connectivity forum on this site.
    3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
    Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
    into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
    this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
    the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
    5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
    additional information.
    HTH

  • How to transform a layer object and a path at the same time?

    Hi all,
    I know I am going to kick myself when you tell me the answer to this!
    I would really like to know if there is any way I can manage to to transform both a layer object and a path at the same time....or if there is any workaround to achieve this.
    In a nutshell, say for example I spend a VERY long time creating an intricate path around a very detailed object, and then at the very end notice just how crooked and out of perspective it is, and would like to straighten it.
    Of course I could transform and correct the object, and then carefully transform the path - but it just won't be exact, and I will have to spend a long time adjusting the path and making SURE it is perfect.
    Isn't there any way I could get to transform them together?
    Usually of course I do all the correction to straighten and correct perspective beforehand, but in some instances after I am done creating the path I then notice that the image could have used further adjustments.
    I appreciate so very much any advice you may have:)
    Thank you kindly,
    Christine

    Okay...I found another way as well... suddenly it all started coming to me in the last few minutes:)
    Once the image is on it's own layer, then we can select the path and then make a vector mask by going to "Layer>Vector Mask>Current Path". Once the vector mask is created, simply click on the image icon on it's layer, then transform away to your heart's content, and the path is transformed along with it. Once finished, the path for the vector mask can be saved as usual. (Don't click on the vector mask icon when transforming the image, otherwise only the path will be transformed.)

  • How can I record a microphone and software instrument at the same time in Garageband 10.0.1?  It seems I can record one or the other, but not both at the same time?

    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.  It seems that I can't record the mic input and the software instrument at the same time.  I can record the mic input by itself, and I can record the software instrument by itself (if I don't have a mic input track created), but I can't record them together.
    It seems like this should be an obvious thing to be able to do, but I can't figure out how to make it work.
    Can someone help?
    Thanks,
    Kurt

    Kurt1997 wrote:
    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.
    you need to "record enable" both tracks:
    http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How to?? show smartform and generate pdf at the same time

    hi experts,
    how can i show the smartform and generate  a pdf at the same time?? i have a control parameter gtotf in X and i generate the pdf but i want to show the smartform at the same time??
    thx in advance

    Hi...
    call fm <sf function name>
    exporting...
    importing..
    tables..
    now in the outputparam set the getotf as 'X'.
    call the same FM again and get the otf data.
    call fm <sf fm name>

  • How to run save for web and contact sheets at the same time

    Hi
    my question is simple and a means to save time-
    Lets suppose I have 3 camera images and I want to run either save for web applications on 2 cameras at the same time, how/can i do that to save time or lets say contact sheet action on 1 and save for web on the other to save time or photoshop files and this runs in the background?
    would really help save me time.

    Even if you could run the three process in the background at the same time I do not think the duration of the total execution time would be any shorter. You would still be executing the same number of processor instruction reading and writing the same number of files. If the whole processor was constrained by the processing power running them cuncurrenly may increase the processing time because of contention for the processor. If the processes are IO bound that will not change a overlaping the processes may cause more hard disk seaking because of contention of the hard disk arm.

  • Airport Express - iTunes streaming and wireless bridge at the same time?

    I know the Airport Express (AX) can do iTunes streaming. And I know it can act as a wireless bridge - meaning, a wired device can plug into the AX as if they were plugged directly into the local network.
    What I am wondering - before I buy one - is whether the AX can do both at the same time. I have been reading around, and some people say it cannot, but I am getting the feeling that might be an older version perhaps.
    Here is my set up -
    office:
    cable modem > Airport Extreme 802.11n base station
    desktop computer
    family room:
    DVD, TV, TiVo, etc. -- all would like a wired network connection
    Stereo -- would like to stream iTunes from desktop computer
    So can the AX stream iTunes to the stereo, AND serve up the network to the TiVo, etc. at the same time?
    If so, I assume I can plug an Ethernet Switch into the AX and have it simultaneously service >1 device (e.g. TiVo, TV, etc.).
    Thanks a lot!

    The newer 802.11n AirPort Express Base Station (AXn) can be setup in any of the following three configurations to enable its Ethernet port to provide network connectivity to wired clients:
    1) As a remote base station in a WDS with another 802.11b/g/n AirPort.
    2) As an extension to another 802.11n AirPort/Time Capsule.
    3) As a ProxySTA (Ethernet bridge) with any wireless router.
    I have verified that it can support both performing as an Ethernet bridge and stream simultaneously for the first two configurations, but have not had an opportunity to try the last to verify that case as well ... but I believe it should.

  • How to record a USB mic and a guitar at the same time?

    I have an Audio-Technia AT-2020 USB mic and an Ovation acoustic/electric guitar. I wanted to record both of them at the same time, so i plugged the mic into the USB port (duh!) and the guitar into the 1/8" port on the computer (with a 1/4" to 1/8" adapter and a male/male headphone cable). However, when i went to select the inputs for the diffrent tracks, it was either one or the other. My question is, do you need an audio interface to be able to do multitrack recording? If so, could I use a USB hub, 1/8" to USB adapter, and plug both the guitar and mic to fool the computer into thinking i have an audio interface? I would rather not spend money on an audio interface ($200) and a new mic ($120) when i already have something that could work!
    Thanks to anyone who can help!

    beberhard14 wrote:
    do you need an audio interface to be able to do multitrack recording?
    create an aggregate device from the mic and line-IN:
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can AE view frame 1 and frame 20 at the same time?

    Hi all,
    Is there any way to view ,for example, frame 1 on the left view, and frame 20 on the right view?
    I tried "Locking"  the view in COMP A and look at COMP B.
    Although you CAN look at two different images (left & right views) you can ONLY view 2 different images of the same frame number.
    I am looking to color grade frame 20 and match it to frame 1.
    If there is a way, I forgot how to do it.
    anyone know?
    Thanks,
    Lou

    I assume you mean color correcting between the shots. Color correcting is getting the shot to look "right", color grading is getting the scene to look pretty.
    One way is to duplicate your composition, put one at frame 1 and the other at frame 20 and have both comp windows open. This page [link] talks about that a bit.

  • How do I play a video and audio file at the same time on Apple Tv?

    I need to play a video loop (with no audio) on my apple tv and also play some music in the background. Its a video loop with no audio and then I need music to play in the background. The loop needs to repeat all day because its only 5 min long and the audio is an entire play list that's several hours. This is for a lobby flat screen setup.

    QuickTimeKirk wrote:
    Very difficult request because the Apple TV can only play one file at a time. It doesn't have a "loop" feature.
    You could use QuickTime Player Pro to "join" the audio files into one file. The hard part would be adding the five minute video chunks via copy/paste as each would be added as a new "video" track. QuickTime .mov files can have up to 99 "tracks" and the .mov container is supported by Apple TV.
    So this new file would have a new video track (actually just a copy of the original) that played up to 98 times. A five minute source video would end up being a bit over 8 hours in duration.
    The 98 track video could be "flattened" into one video track via export. The same for the audio track movie.
    Other options:
    Set the Quicktime Loop flag in the movie inspector properties.
    Make a video playlist, adding the file to the playlist lots of times - make sure playlists are enabled in Settings for video not just music.

  • How can I have a canvas and external controls at the same time?

    Typically all the space of an applet is used for 2D or 3D; that is, the applet provides the canvas. I am trying to develop an applet where I only want to use part of the applet space for 3D, and then, outside that space (but still within the applet) I would like to add some controls (e.g. buttons or text fields) to provide some interaction. In other words, I want to have an applet that contains something like a frame for 3D, and some controls outside the frame.
    It may be quite easy, but I am very new to applets. Can anyone kindly give me some suggestions? Any help is highly appreciated!
    Regards,
    Hua

    I got it figured out. Thanks anyway!

  • How can you view what your cropping on FCE at the same time as cropping....

    I need to crop a clip however don't know how to work the 'sliders'. How can i preview what i am cropping as i am doing it?
    Many thanks,
    Ed

    Put the clip into the timeline. Put the playhead over the clip. Double click the clip in the timeline. In the Motion tab adjust the sliders. Or use the Crop tool in the Canvas with the View popup set to Image+Wireframe.

Maybe you are looking for