How do I wake up the tablet on a HP Photosmart eStn C510 printer when it goes into sleep mode.

I have tried to wake up my tablet attachment and it won't wake up. I have tried on/off switch and pressing the home/and the other 2 buttons beside the home button but still won't come on. This happened once before and somehow got it to wake up. This happens when printer sits idle for a long time. I try to press the home button every now and then to keep active.

Hello bburkholder,
I would suggest following the document at the link below. It sounds like you have done some of the steps within the document, but the other steps may provide you a solution.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&tmp_task=solveCategory&cc=us&dlc=en&la...
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

W510 does not wake up when it goes into Sleep mode - Windows 7 Bit

Hi All,
The Lenovo thinkpad w510 does not want to wake up once it goes into sleep mode, I have to push the power button until it shuts down completely and then reboot it completely, I have tried different settings in the power management etc. We have the same pissue on 3 different w510`s with Windows 7 pro 64 Bit
Has anybody got a solution for this problem?
Regards,
Solved!
Go to Solution.

Hi russellwth,
Welcome To Lenovo Forums.
This issue has been solved with the latest BIOS for the W510.
Please check our Knowledge Base Article regarding this issue.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

IMac taking ten minutes to start up and sits at a blue screen for the most of the time. Also, when it goes into sleep mode I am unable to wake it up from it.

For the past few days now whenever I go to turn on my iMac it takes roughly ten or more minutes to boot up. For the portion of this time it sits on a blank blue screen. At first it comes up to a plain white screen which after about 30 seconds has the apple logo on it and the spinning circle for about a minute then to the blue screen, every time. Then, to top it off right when this started happening another problem began occurring. The computer is set to go into sleep mode after 15 minutes of no use. But, if it is in sleep mode for too long I am unable to get it out and I have to restart the entire computer, but if it is just for a few seconds into sleep or a minute I am able to get the screen to come back. I can still here the fan running and such so I don't know what is going on. I have searched through discussion after discussion. I have tried: repairing disks, repairing permissions, starting up in safe mode, and such. There has been no luck so far. I was wondering if anyone could offer insight into fixing at least one of these problems since my schooling relies on the computer.
By the way I this is an iMac 10.6.4 refurbished which we just bought about two weeks ago.
Thanks for any suggestions!

My iMac i7 quad was having the same symptoms with the blue screen and long startup times a couple of months ago. Apple Care told me to bring it in to the local Apple Store, and after some diagnostics, the hard drive required replacing. It took one day to replace the hard drive and my iMac is running great. I only had the iMac for about 12 months when the drive needed to be replaced. Not sure if that is your Mac's problem, but it was for mine.

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

This is usually a sign that your iPod's headphones are not plugged in all the way. Make sure that you cannot see any of the silver still showing from the headphone's plug. You should hear a sort of popping/clicking noise when inserting the headphones letting you know that they have been fully seated.
B-rock

How can I select shutdown & close the display w/o going into sleep mode?

I have learned to wait untill the MBP full shuts down before closing the display. In the past I have pressed shutdown closed the display only to find out later the MBP goes into sleep mode before fully shuting down. When I reopen the display the computer finishes the shutdown process or worse the battery is dead.
I would like to select shut down, close the display and walk away while the computer completes the shutdown process.
Is there any setup options or apps. that will allow this?
Thanks, Joe
(new to the mac)
MBP Mac OS X (10.4.6)

Well hello there, and welcome to Macintosh.
Unfortunately you can't change anything to stop this from happening. The shutdwn process goes about its business killing processes and applications that have been running. The sleep process interrupts ALL business going on in the OS, and puts the machine into low power mode, as it is not aware of the nature of the running processes (in this case, the shutdown process), knowing only that they must be slept and the machine dropped into sleep mode. You gotta wait it out before you close the lid.
I would suggest sending a message in OS X feedback requesting this as a feature!
If you find this response helpful or if it solves your issue, please click the appropriate icon in the header of this reply.

Monitor goes into sleep mode and will not wake up

My monitor goes to sleep and will not wake up. I try powering off and that will not respond. I have to unplug the workstation and start back up. I have turn off sleep to never sleep and now it just goes to sleep when Im working.

Hello @rosendahl14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Unexpectedly goes into Sleep Mode... All the time!

I've had this Powerbook for about 2 years now, and I've got some problems. About every 5 or 10 minutes, it goes into sleep mode! It acts as if I close the screen, so I wake it up by pressing the spacebar. But sometimes... pressing the space bar doesn't wake it up, not even holding the power button turns it off! I have to remove the battery to restart it! Can someone help please?
By the way, I checked "Power Save" settings in System Prefs and everything seems to be correct.

If you have issues with a Mac or display that goes to sleep at inappropriate times, you may have a problem with Energy Saver. Delete the following .plist files and restart:
-/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
-/Users/username/Library/Preferences/com.apple.systemuiserver.plist--
(username is your name or System Administrators name)
-/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
A restart is very important after deleting these plists. After a reboot your Mac will then generate new ones.
Some, in these forums, have had luck fixing sleep issues downloading the Combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
Yours would be the 10.4.7 Combo update. Others reading, download the combo update that applies to you!
Cheers!
DALE

When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in

When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in
and will then boot up again without any errors.
I Have replace RAMS, Motherboard and Power Supply. I have check the Bio's and Power setting on the unit. there is no place to cause this issue.
Please help
PC Power Tech

Syamak,
You didn’t specify where the beeping noise is coming from.
If it’s coming through your speakers, you could try to update your audio drivers since it’s possible they’re incorrectly sending a signal to the speakers as the audio chipset enters standby.
If the noise is coming from the motherboard, you’ll need to take a closer look at your system’s configuration or contact the manufacturer.
I hope this helps.
Mike
Windows Outreach Team – IT Pro

My iMac goes into sleep mode, won't come out until I unplug and replug the computer then hit the power button. Just hitting the power button alone won't restart the iMac.

My Imac goes into sleep mode but won't come out. The keyboard/mouse won't rouse it and the power button won't do it either. I have to unplug the computer, re-plug it in and then hit the power button. Help?

I looked around the internet and found an old post that seems to have solved the problem. I had a relatively new USB port (powered) that I unplugged and, ta da, the problem disappeared. I'm not sure why this happens (I'm not a tech person) but it seems like this should have been worked out in testing somewhere.

Macbook pro goes into sleep mode after few minutes and won't wake up

Since yesterday my MB pro suddenly goes in sleep mode while working and won't wake up. After reset the MB Pro goes into Sleepmode befor I get the log in screen. After resettin SMC and PRAM I can log in but after a few minutes, againg deep sleep. I'ts not a software isue I think because when I use my MB Pro's harddrive by firewire as the startup disk on an other macbook it works fine. anyone knows about this problem?

It sounds obvious but are you sure your power adapter is ok and the battery is charged. The behaviour sounds a lot like low battery sleep.
Press the check button on your battery pack - do you get plenty of lights?

My macbook goes into 'sleep' mode when my mobile runs over the bottom left corner, next to the trackpad, does anyone else have this problem?

Not sure if anyone else has this problem. I only noticed it a few weeks ago when I left my mobile on the keyboard, towards the left of the trackpad. When I started typing I accidentally nudged my phone off the board and then everything went black. I hit any button and everything turned back on again. I'll assume that it went into 'sleep' mode. Is this normal or should I be worried about the health of my mac?

I am facing pretty much the same problem ... although sometimes the click does work on other parts of the trackpad, but largely I have to stay focused on the left bottom corner. It's getting slightly frustrating esp. because I like the click better than the "tap" and my MAC is only a month old!!
Is this a software issue or a h/w problem?
~ saumil

I don't think my computer is completely shutting down. I think it is only going into sleep mode. When I hit the power button, it turns off immediately instead of shutting down.

I don't think my Mac Pro is completely shutting down. When I hit the power button, it just turns off immediately instead of going through the normal shut down procedures. I heard that I should try resetting the SMC, which involves removing the power cord. However, when I remove and replace the power cord, it turns on automatically, so I can't even properly reset that to see if it is the issue. Is this probably a power supply issue?
Actually, in case this information helps... The computer went into sleep mode the other day, and would not come back. This is a work computer that I use for our photography business, and at this point I am just trying to run it as a drive to get the photos onto our new computer, but this issue is keeping us from doing so. Any help would be greatly appreciated!

Try a SMC reset.
DALE

The plugin container crashes if the computer goes into sleep mode or screensaver mode

it seems everytime I put my computer into sleep mode or if it goes into screensaver mode the plugin container crashes

Update it appears that if I leave like a video or game open while I leave or turn it into safe mode it crashes it

How can I close the lid on my Mac Book Pro (late 09, 10.6.8) without it going into sleep mode?

I recently moved my room around and such, and now it's become more useful (I also purchased an HDMI adaptor which helps) to use my TV as a display, especially when I'm recording music, watching movies online, etc. Problem is, the HDMI cord I'm using is only 1.8 ft. so my computer has to sit in the middle of my desk, thus taking up the bottom portion of my TV screen when open.
I know there's an app out there that keeps the computer from going to sleep, but I don't like it because I forget it's on and Ill toss my computer in my backpack to go to the library, I get there and it's a million degrees....
If it matters for anything the setup is as follows:
13 inch MBP, 8 gb ram, 2.26ghz intel core 2 duo, Os X Version 10.6.8. Late 09 I believe.
I'm using the mini display port to HDMI adaptor (made by apple, not a knockoff if it matters).
When using my Tv I'm using a wireless mighty mouse (bluetooth) and the apple on screen keyboard.
Also, it's not at the top of my priorities, but eventually I'll probably have the computer set up next to the Tv, I've got the displays set up so that the Tv is on top of the computer display (I understand how to move them) but is there a way to make it so that when the lid is open, it acts as two, non-mirrored, displays, and when I close the lid it switches to one display (the Tv), and obviously, when no display is connected, it uses the internal display as it's sole display?
And lastly, is there a way to transmit sound through my Mini Display port to my TV? It's not the end of the world if not in 10.6, I saw something about how to do it in lion, but that's not enough of a reason for me to upgrade. I use a sound system so like I said, not the end of the world, just would be really nice, and I feel like after the money I've dumped into apple for this computer, it should do about anything I ask it to short of making me waffles in the morning (however, apple, if you release some sort of add on to do this, I'll be at the midnight release wearing a shirt that says"waffle enthusiast".)

You can't but you can wake it up immediately after.
http://docs.info.apple.com/article.html?artnum=86286
http://docs.info.apple.com/article.html?artnum=300562

How do I wake up the tablet on a HP Photosmart eStn C510 printer when it goes into sleep mode.

Similar Messages

Maybe you are looking for