How do I watch multicam with audio?

Made a nested sequence, turned it into multicam, but when I watch all angles simultaneously in the source monitor, there's no audio. How do I enable the audio tracks? I've tried turning them "on" on the timeline, selecting them, grouping them, nesting them, playing with audio track levels, what do I do?

The multi-cam display only shows up in the Source monitor. I just want to watch all cameras with audio and be able to switch between them. Is there a way to do that?

Similar Messages

How does logic x deal with audio anchor points?

In logic 9 you access the audio file anchor points via the sample editor. I cannot find the sample editor in logic x. How then do we deal with anchor points?

These two links will give answers to your questions:
http://help.apple.com/logicpro/mac/10/#lgcpcac7b11e
http://help.apple.com/logicpro/mac/10/#lgcpc78843f6
Have a nice day!

How to make a dvd with audio track after exporting using media encoder? I have 2 seperate files??

Hello,
I need to just burn a video I finished. It's a m2v file and so I have a AC3 audio tack and a video track. I thought I was good to go, but I cannot figure out how to burn the audio and the video to the same disk! This is very annoying as the settings I have to use for export to keep video quality will give me 2 seperate files.
So, what programs do you use or recommend that allow me to add an audio track? I don't want people to have the option of switching between tracks I just want a normal track like you have when watching a movie, I mean it just plays by default.
Thanks in adv.
Mark

The caveats that I would issue to others are:
1.) muxed Assets often work fine, but can cause problems. Properly spec'ed. elemental streams seem to never cause problems.
2.) Encore will allow one to populate a Timeline with multiple Assets. However, it can get very confused in some cases. One is where an Audio Clip is just an Audio Unit, or two, too long, and one has a tiny gap, between their Videos. Using one Timeline per Sequence will always work, so long as the Assets are properly spec'ed.
I'm not saying that either of these WILL cause problems. Many do similar with zero issues. However, there is the potential for problems. Just use with care.
Good luck,
Hunt

How to create a slideshow with audio?

Hi,
I'm using iMovie 7.1.4.
I want to create a slideshow from 6 pictures, with an accompanying audio. The pictures should show one after the other according to audio, meaning the intervals are not equal, and I need to determine each interval while listening to the audio.
How do I do it?
Thanks,
Gil.

excellent advice on Aaron's site:
http://unlockingimovie.blogspot.de/2009/02/how-to-edit-to-beat.html

How can i fix problem with audio in my iPhone 4 ?

please I can`t hear any audio only through speaks in my iphone 4.
WHY? PLEASE HELP ME

go to settings > general > usage > music app under the storage section > slide across the bar that says 'photo library' and a red delete button will appear
you can also plug the device into your computer with itunes, go to the photos tab at the top center and uncheck where it says 'sync photos.' then press 'apply' in the bottom right corner. this will erase the photos that were synced to your phone from the computer

How to pause stage/swf with audio when a new tab is opened/ out of focus in browser

I have created a container in Flash Professional CS5 for my project’s CBT. I’ve been able to script many of the features we require using AS3, but there are a couple of things I’m still trying to work out.
I would like the swf presently playing in one tab to pause and go silent when another swf is opened in a new tab (the sound is inside this externally loaded swf which is loaded inside a movie clip from buttons nested a movie clip down). I’ve tried :
var originalFrameRate:uint = stage.frameRate;
var standbyFrameRate:uint = 0;
addEventListener(Event.ACTIVATE, onActivate);
addEventListener(Event.DEACTIVATE, onDeactivate);
function onActivate(e:Event):void
       stage.frameRate = originalFrameRate;
       trace("in focus");
function onDeactivate(e:Event):void
       stage.frameRate = standbyFrameRate;
       SoundMixer.stopAll();
       trace("out of focus");
And
      I’ve looked into the HTML tag “has Priority”
and coded buttons to:
function fl_ClickToGoToWebPage(event:MouseEvent):void
       navigateToURL(new URLRequest("http://www.ansaldo-sts.com/AnsaldoSTS/EN/index.sdo"), "_blank");
       MovieClip(this.stage).stop();
With variations of:
MovieClip(this.parent.parent)stop();
MovieClip(this.parent.parent.parent.parent)stop(); because the button is 3 movie clips deep.
MovieClip(this.root)stop();      MovieClip(root)stop();MovieClip(this.currentTarget.root)stop();
Could someone please provide me with the code?
This function is present when I publish the CBT with Captivate, so obviously there must be code available. You can set the Captivate button to open url in new window and pause movie.
Is there something I can add to the html file that is similar to the “has Priority” for mobile devices or is there javascript that can be added to the flash itself?

You would send a command to Flash from JavaScript when window.onblur event occurs.

How to convert PDF slideshow with audio to a format playable on devices of today?

I have several old slideshows (10-15 years old) that I created with Photoshop Album and are PDF files and can only be played with Acrobat Reader 5. I kept Acrobat Reader 5 on my computer and never updated so that I can play these slideshow files. The slideshows are very special to me and I would like to keep them and pass on to younger generations. However, I cannot share my slideshows with others since they cannot be played with the PDF format. Is there a software for converting these PDF files to .wmv or other format to make the slideshows playable on devices today?
I have been searching for an answer to this question for several years. Any leads would be greatly appreciated.

I have several old slideshows (10-15 years old) that I created with Photoshop Album and are PDF files and can only be played with Acrobat Reader 5. I kept Acrobat Reader 5 on my computer and never updated so that I can play these slideshow files. The slideshows are very special to me and I would like to keep them and pass on to younger generations. However, I cannot share my slideshows with others since they cannot be played with the PDF format. Is there a software for converting these PDF files to .wmv or other format to make the slideshows playable on devices today?
I have been searching for an answer to this question for several years. Any leads would be greatly appreciated.

How can I playback comp from the playhead position with audio?

If I hit Spacebar comp will play without audio. If I hit Cmd+"Keypad-0" I get playback wth audio but playback begins from start of work area. How can I get playback with audio without having to reposition the work area in/out markers?
AE CS 6.1.x OS X 8MB RAM

Thanks for the links Szalam. Yes, 'spacebar is not an option, people'.
Could have used those links 2 weeks ago! Gave myself a crash course in AE consulting Dr Google and Ms YouTube on the things I was looking to do and did some patient reading of the manual (old school player).
I have 4 years working in Quartz Composer (Noise Industries make all their AE and NLE plugins using Apple's Quartz Composer framework) and a lifetime in AI, PS, ID etc all the way back to MacPaint and MacDraw but it was still hard to get the hang of AE's quirks for quite some time. Will check out your respources when my deadline passes.

Banner rotating with audio

Hello,
Could any one tell me how can I rotate banners with audio for every 10 seconds. Source code will be helpful.
Thanks

<div id="whiskey" style="position:absolute; width:475px;
height:60px;
z-index:3; left: 351px; top: 486px; visibility: hidden;">
<div align="center"><img
src="images/sponsors/whiskey.gif" width="475"
height="60"></div>
</div></td>
<td width="73%"
This layer "whiskey" is in a table cell (see the closing
</td> tag
immediately after the closing </div> tag for the
layer). That's a nono.
Please read this about how to work with layers -
http://www.thepattysite.com/layer_laws.cfm
Anyhow, the simplest fix for you would be the following.
Change this -
<div id="whiskey"
to this -
<div style="position:relative"><div id="whiskey"
and this -
</div></td>
<td width="73%"
to this -
</div></div></td>
<td width="73%"
and see what happens.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"sneedell" <[email protected]> wrote in
message
news:e3fvbj$1gh$[email protected]..
>I just created a rotating banner with layers and like the
guy earlier that
>was
> having problems when you resize the window i am having
the same problem.
> Wondering if i could ask nicely for some help?
> Here is a link to my homepage where the banner will
reside so you can look
> at
> the code
>
http://www.wchacutting.com
> any help would be greatly appreciated!
>

Watching dvds with vlc-no right-click 'open with vlc' option as on the pc?

i searched discussions for this question but wasn't sucessful ... so here's my question:
i use a toshiba pc laptop and an iMac G5 ... in order to watch dvds (with different region codes) on my PC, I use VLC with great success ... I wanted to do the same on my iMac, but came across the following problem:
when I want to watch a DVD on the laptop, i simply right-click the title and go for 'open with VLC' (which gives me the menu and so on) ... when I try to do this on the iMac, however, there is no
'open with VLC' option when I right-click the DVD ... I can open single chapters of the DVD by opening the single .vob files, but I'm not happy with doing that ...
any ideas how to make watching DVDs with VLC on my iMac as easy as it is on my laptop?
thanx for your help!
2.1 GHz iMac G5 1.5 GB DDR2 SDRAM Mac OS X (10.4.6)

If you want all video DVDs to open in VLC, go to System Preferences>CDs & DVDs>When you insert a video DVD:>Open other application> and now select VLC.
This will open VLC, but the DVD will not automatically play, you have to go to File>Open Disc once in VLC.
One question though, why not use Apple's DVD player Application?
Daniel Gilmour
eMac 1.25 Ghz, iBook 14'' 1.42 Ghz Mac OS X (10.4.5) 512mb ram, Superdrive; 5G 30gb iPod, 4GB White iPod nano

Capturing screen with audio

Hi Everybody,
How to capture the screen with audio?(WIthout camera or webcam).
Is it possible?...
Can anyone know?

Welcome to the Sun forums.
>
How to capture the screen with audio?(WIthout camera or webcam).>There are two parts to the 'capture' this problem, and they are probably each best done in its own separate thread.
1) Gain screenshots at a regular rate (FPS), and store them as images (JPEG would be easiest). For getting the screenshots, use [Robot.createScreenCapture(Rectangle)|http://java.sun.com/javase/6/docs/api/java/awt/Robot.html#createScreenCapture(java.awt.Rectangle)]. For saving the images, look to the [ImageIO.write()|http://java.sun.com/javase/6/docs/api/javax/imageio/ImageIO.html#write(java.awt.image.RenderedImage,%20java.lang.String,%20java.io.File)] variants. After you get the idea of just how unworkable a 'screen size' animation is, you might also look to scale the images before saving them. ;-)
2) Access (and store) the sound passing through the system.
Ironically, the second is much more tricky than the first. It is not the 'storing' that is a problem, so much as even detecting sound using JavaSound.
Once you have achieved all that, it is a matter of turning the JPEGs into a MOV, then adding the soundtrack.
Note that this is a relatively advanced project. From the little I know of you, I strongly recommend putting it aside for six months to a year, as you become more familiar with the language and APIs.

Multicam-Strange Audio file trunctation when changing cameras

I have a sequence nested as a multicam with audio from one of the cameras in the multicam included in another audio track in the same sequence. When I change angles to the angle with the camera with the audio on it, the audio is deleted from that point in the sequence until the next camera change or cut.
None of the other tracks are affected. I can lock the audio track but then this impairs my efficiency at doing a razor cut to edit the multicam sequence and audio track at the same time.
I suppose I could (and I will) create a separate audio file and put it into the same timeline, but I feel I should not have to do this.
This video and audio happens to be XDCAM EX format.
Thanks for any advice.

Yeah, sorry it's confusing, let me explain:
I usually edit multicam this way:
I nest the sequence that has multiple cameras/tracks (sourceSequence) into a new sequence, let's call that sequence MCSequence
I also put one or more tracks sourceSequence into MCSequence below the nested soureSequence track. This was I have a reference for all the clips and blank spaces between clips in sourceSequence.
I also use one of the audio tracks of these reference clips as the master audio for MCSequence.
In MCSequence, if I make a camera change, inexplicably the left audio track of the 'reference' cuts that point and is deleted up until the next cut point in MCSequence. This happens to be the exact audio track I need to use which happens to be the XDCAM EX track. The right channel isn't affected, just the left.
Since I'm using that track as my master audio, it's a pain. I want to be able to have a fully edited MCSequence but also have this master audio track as well available so I can perform volume corrections and other stuff, L edits on the audio etc. It's a pain to have to deal with what I think is a strange bug.
Anyway I hope this is clear but I fear it's just a glitch I'll have to deal with.
Thanks for any advice.

My question is how do I watch and play music videos in my car with mybipad2? I have a new cd player, andbit takes the USB cord supplied by apple. When hooked up all I get Is sound, no video. Just says "assoriy connected" any tips

My question is how do I watch music videos while my iPad is connected to the cd player in my car? I haveva new cd player. I get sound but screen just says accessory connected and I canted anything to the touch screen. Any tips?

1 a cd player only plays audio, no video
2 iPad does not tether to players other than to SEND data to an HDMI or VGA with the proper adapters.
The camera adapter will allow you to import camera data (pictures)

How can i watch a movie with subtitles

how can i watch a movie with subtitles

Yes. Go to settings on your apple tv. Audio video. Subtitles and closed captioning are in there.

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

How do I watch multicam with audio?

Similar Messages

Maybe you are looking for