How do i "when the ACPI mode is enabled (by default) under Windows 2000. To fix the problem, replace the gpibpci.sys file on your machine" Where do i go to do this?

I keep getting an error message on the blue screen of death. Beginning dump of physical memory. To fix it a messgae board said "when the ACPI mode is enabled (by default) under Windows 2000. To fix the problem, replace the gpibpci.sys file on your machine with the one that is attached below and then reboot the machine." Where do i go to add this file?

I will get this error randomly, once when I was opening a file on another computer on my network, once when I was logging onto to my bank website on the internet, and another when I was searching through my d drive. Nothing to difficult, I do not even have other programs running when it happens sometimes. Thanks for any help!

Similar Messages

Hi Since upgrading to Firefox 4.0 I am unable to clear history and get the message "quick time failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas?

Hi I Run Windows 7. Since upgrading to Firefox 4.0 I am unable to "clear history" and get the message "QuickTime failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas or suggestions?

i have that quicktime problem too

I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."

Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.

Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium

HT1414 I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my OC runs under Windows 8.1. IOS 7.1. Someone can help me, please?

I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my PC runs under Windows 8.1. and Iphone runs under IOS 7.1. Someone can help me, please?

It seems I have solved my own problem . . . well hopefully !! ;-)
I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
Hopefully this may help others . . . ?
Cheers,
Grant.

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link.

MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How do I get the fn key on the aluminum keyboard to work like Insert under Windows?

How do I get the fn key on the aluminum keyboard to work like Insert under Windows without having to press fn + Enter?
This article explains the problem but has no real solution:
Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support

I'm not sure if you even read the first couple of posts at all. On the old Apple Pro Keyboard (white keys and translucent body), pressing the Help key resulted in exactly the same key code as the Insert key on any standard (IBM) PC keyboard. This meant that regarding this key, that Mac keyboard will work just like a PC keyboard. (I don't care much about the other keys.)
The problem is that on the current Apple Keyboard with Numeric Keypad (white low-profile chicklet keys, ultra-slim aluminum body), the Help key is now called fn and produces a different key code than the old Help key, so that you have to press fn + Enter (on the numerical keypad) to get Insert.
This page explains the problem:
Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support
Do you understand what I mean? It's not a software thing, it's a hardware issue in the Apple Keyboard with Numeric Keypad, because fn is a hard-coded, not software-controlled modifier key. I have no idea if there is even a way to get around that, and that is what I am trying to find out.

HT201272 why is it when i try to download a purchased song i get a error saying a problem downloading the artwork then it will not download why.

why is it when i try to download a purchased song i get a error saying a problem with the artwork then will not download.

Hello okley
If you are having an issue with your purchased music, check out the following article to report the issue.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have installed photoshop elements 12. when I try use the editing features it said that i must login to Adobe to register the product. but each time i try to it said there is a problem. help the problem stated that the internet is not connected, but that

i have installed photoshop elements 12.
when I try use the editing features it said that i must login to Adobe to register the product.
but each time i try to it said there is a problem.
help
the problem stated that the internet is not connected, but that is not the case.

I had the same issue and I'm running Windows 7. Tried working with technical support for several hours but they were no help. They just had me doing the same things over and over, offering no real answers. I finally got fed up and have decided to return my product for a full refund.

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
David

You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

RDC for MAC cannot connect to TS server with error message "You were disconnected from the Windows-based computer because of problems during the licensing protocol".

the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/dan

Hey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work.

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Backup Error - 0x810000E4 Windows Backup has encountered a problem with the backup catalog

Dear all,
I'm trying to backup my files onto a 2TB big external USB disk. My computer is Dell Latitude E4300.
When I run the backup, it runs normally but ends with this error:
0x810000E4 Windows Backup has encountered a problem with the backup catalog
When checking the zip files on the USB drive, it seems that only some of the files have been backed up. The same confirms the restore option when I browse the files in the backup.
When I start the backup again, it continues - i.e. acknowledges the files already there and backs up a additional files but again fails after some time.
Any ideas please.
Thank you,
Tomas

Hello Tomas,
This is not expected.
Could you please collect the backup failure traces from %windir%\Logs\WindowsBackup and send them to my mail-id -
[email protected] (pl. remove -nospam phrase from the id to get the correct one).
Thanks,
Sriram [MSFT]
Sriram [MSFT]

I have a window asking: do you want to replace the existing Normal.dotm? what should i do? I'm on OSX 10.7.5 with Office 365 14.3.2 for mac 2011.

I have a window asking: do you want to replace the existing Normal.dotm? what should i do? I'm on OSX 10.7.5 with Office 365 14.3.2 for mac 2011.

That is not what I said.
Normal.dotm is a template, not a .doc file. It is the template that every new document is based upon, IF you changed any of the template settings (font size or other attributes) then you will be prompted to save the changes.
Did you? (or is this an old Windows Template)

Adobe reader: Edit - Preferences, Categories: Documents, Open Settings - Restore last view settings when reopening documents :: should be enabled by default

Adobe reader: Edit -> Preferences, Categories: Documents, Open Settings -> Restore last view settings when reopening documents :: should be enabled by default as most users are not aware of this feature and have to write down their page number some where in text file or sticky notes

Bug Reports or Feature Requests should be filed at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How do i "when the ACPI mode is enabled (by default) under Windows 2000. To fix the problem, replace the gpibpci.sy​s file on your machine" Where do i go to do this?

Similar Messages

Maybe you are looking for

How do i "when the ACPI mode is enabled (by default) under Windows 2000. To fix the problem, replace the gpibpci.sys file on your machine" Where do i go to do this?