How do i wipe sim card clean to give phone away

How do i erase sim card s that I can give phone away.

You can't erase the info on the SIM, and you'll need your SIM for your next phone, I guess.
To delete all the info on the phone, set it up as new device, without using any backup to restore from, explained in this article:
How to back up your data and set up as a new device

Similar Messages

  • How do I wipe a 4S clean...phone is locked up

    IPhone 4S is locked up and I want to wipe it clean....I turn on phone and all I see is the ITunes logo with an arrow pointing to the charger

    That logo means you need to restore it using iTunes...have you attempted to do so? If so, what happened when you tried?
    ~Lyssa

  • HT5554 how do i remove sim card from i phone 4

    how do I remove sim card from i phone 4

    The CDMA iPhone 4 does not have a sim slot.

  • How to access my Sim Card Applications ( nokia N90...

    hello guys
    was wondering how to access my Sim card applications
    i used to go to settings then to sim card and bingo
    but with nokia n900 its a diff story , plz help

    Do you mean that your iPhone is locked to a carrier and you wish to unlock it to use with another carrier? Or do you mean that your SIM has a PIN or PUK code that you have forgotten or don't know?

  • HOW CAN I CHANGE SIM CARD TO NANO CARD?

    HOW CAN I CHANGE SIM CARD TO NANO CARD?

    Just contact your network provider & they will issue you with a nano sim card & transfer your phone number over to it.
    I did this with Vodafone (UK) on my current sim only plan and the new nano sim card was live with my original number within 20 minutes of leaving the shop.

  • When copying raw files from Extreme IV card to hardrive, finder copies a few files then exits task and wipes the card clean of all images.

    When copying raw files from Extreme IV card to hardrive, finder copies a few files then exits task and wipes the card clean of all images.  Have tried new card and card-reader to no avail.  Have done this many times on other macs with no problems.
    Can edit files off the card, in CameraRaw, prior to 'copying' them, ie can 'save as' to the hard drive, so files seem okay on card, before I try to copy them using copy and paste.
    Running OS 10.8.3 on a new macbook pro.

    Rita,
    The process for determining what is causing the files to be corrupt can be a tedious one depending on the following:
    1. Can you review the images on your camera's LCD screen without problems? If not then the problem is most probably either a corrupted/faulty memory card or a faulty camera. If this is the case then your best bet at recovery (of sorts) is to use a program such as BrezzeBrowser from BreezeSys to extract the embedded jpeg versions of the corrupted RAW files from within each RAW file. Chances are, you won't manage to actually repair the corrupted RAW file but the jpegs are better than nothing.
    2. If the images review ok on your camera but are corrupted when viewing on your computer and there seems to be no other problem with other files on your computer then it may be either a faulty card reader or usb/firewire cable between the card reader and the computer that is the culprit. Try the card reader with a different cable and also try a different card reader to determine the cause of the corruption.
    3. If your symptoms are that you get different files corrupting over time when viewing them on your computer then the problem may be any one of either failing RAM memory, hard disk, hard disk controller or IDE/SATA hard disk cables. This is where the troubleshooting can be pretty tedious testing then eliminating each item from the list of suspicious pieces of hardware. Try the card and card reader on an altogether different computer to see if the files transfer correctly to that computer. If so then the problem lies with your computer hardware. If you haven't already done so at this stage, backup all your important data immediately (hopefully you keep backs anyway).
    Hope this helps.

  • I think i have a virus on my Macbook Pro, OS X Yosemite, how do i wipe my computer clean without erasing photos and music etc?

    i think i have a virus on my Macbook Pro, OS X Yosemite, how do i wipe my computer clean without erasing photos and music etc?

    The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
    You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
    If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they may be the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked.
    Back up all data.
    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
              8.8.8.8
              8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. If the fake update alerts stop, see below. Otherwise, ask for instructions.
    The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
    After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
    Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
    1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
    2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
    3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
    During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
    Check the router manufacturer's website for a firmware update.
    If you downloaded and installed what you thought was a software update, ask for instructions.

  • How to insert nano sim card in i phone 5?

    how to inser nano sim card in i phone 5 for the first user?

    Read here what wjosten posted.
    https://discussions.apple.com/thread/4681627?tstart=0

  • How do I insert the SIM card in the I phone 6 I have managed to open it but can not get it back in

    How do I insert SIM card in i phone 6 I have used the key and taken draw out but can not get sim back in

    Probably doesn't have anything you haven't already tried (i.e., push) Remove the SIM card from your iPhone or iPad - Apple Support

  • HT5569 where is the information on how to insert a SIM-card?

    Where is the information on how to insert a SIM-card in an iPad Mini?

    http://support.apple.com/kb/ht5163
    http://support.verizonwireless.com/support/devices/knowledge_base.html/54813
     Cheers, Tom

  • Remote wipe - sim card not supported

    After remote wiping my iphone, when I connect it to itunes it keeps saying the sim card inserted to this iphone does not appear to be supported. What should I do now?

    How was the phone unlocked?  Was it unlocked by your previous carrier?  The only way to unlock your phone is to have your previous carrier unlock it for you.
    If you phone was unlocked in any other way, this constitutes hacking or jailbreaking and your phone will not work with another sim card.
    Get the phone unlocked properly by your carrier and there is no reason why it should not work.

  • How to fix no sim card installed in iphone 5

    how to fix no sim card installed in iphone 5

    By inserting a sim card into the phone!!
    If there is a sim card in the phone, then take it out and re-insert it.

  • How can i put SIM card?

    Hello!! How can i put sim card?

    If you have a cellular iPad with a sim-card slot then you should have a sim removal tool with the iPad (or you might be able to use a been paperclip) and be able to extract the sim card slot on the left-hand side of the iPad
    Sim card removal / adding : http://support.apple.com/kb/HT5163

  • How do I change Sim Cards

    Where do I go to change Sim cards on My Verizon

    If the SIM cards are the same size for both phones, then just move the SIM card to the new phone.
    To change via My Verizon, click on Activate or Switch Devices.

  • I updated my iphone 3g to ios4.2.1 ... the update was succesful but nw itunes says that sim card inserted in this phone is not acceptable and also states that on;y compatible sim from supported carrier is acceptable !!! kindly suggest ...

    i updated my iphone 3g to ios4.2.1 ... the update was succesful but nw itunes says that sim card inserted in this phone is not acceptable and also states that on;y compatible sim from supported carrier is acceptable !!! kindly suggest ...

    horsie10 wrote:
    i bought my iphone in USA and im using it in india .... kindly hellp me how can i resolve this problem !!!
    It has NEVER been possible to purchase an unlocked iPhone 3G in the US. Your phone was hacked. Updating it has re-locked it to AT&T. AT&T will NOT unlock iPhones for any reason.
    The phone is now useless to you. There is no legitimate way to fix this. Buy a new phone. Preferably in India.

Maybe you are looking for

  • Installation from Hard Disk (HD) Partition

    hi has anyone successfully installed this distro from a hard drive partition, or is there a relevent wiki? i am trying to install on a machine with no working USB or CD/DVD.  machine has windows 7 (need to keep), 1 HD, several partitions and grub4dos

  • Planned orders are not converted into process orders in ECC.

    Dear All, The issue is that Planned orders with conversion tick are not publishing in ECC as manufacturing orders. We did check the relevant master data consistency between APO and ECC and it seems fine. We have tried to send the conversion from APO

  • My $20 to someone for writing this script...

    Here is what I need to automate. I don't care if it's a Smart Folder, or an Apple Script, or an Automator work flow - whatever - just so it will work with my present setup. Once I test it and it works, I'll send $20 to the first person who can help m

  • I Got My Shuffle to Work with Windows XP

    OK, I'm no windows expert, but, after much trouble trying to get my Shuffle to work with Windows (Like many folks in this forum), I figured it out. I thought I'd share my solution with the group. No guarantee it will work for everyone, but it might h

  • Connecting EP7.0

    Hello, I'm trying to connect two EP 7.0 to my Solution Manager. The automatic data transfer does not recognize them and when i define them in smsy, the data like software components are not transferred. If i put the dispatchers, servers manually and