How do i wire a sensor to my daq having pulse output

Hi all
I am using NI 6229 BNC DAQ and i have a flowmeter which is giving me pulse as output.
In attachment i am sending the datasheet of sensor.
How can i wire it to my daq
Please help?
Attachments:
flowmeter.pdf ‏288 KB

Duplicate - http://forums.ni.com/t5/LabVIEW/how-to-convert-square-waves-to-a-physical-data/m-p/3149985
There are more than enough threads you have started on the same subject.

Similar Messages

1-wire temp.-sensor

Hi,
I'm using LabVIEW 7.0 and would like to read data from a DS18B20 1-wire temperature sensor. I use an adapter to connect the 1-wire BUS to the USB interface on my PC. Is there a possibility to use this sensor without buy an additional Labview library? And if it only works with this library, where can I buy it and how much is it?
If you have some experience with 1-wire and LabVIEW (maybe there are existing VI's), feel free to contact me.
Thanks,
Dennis
You're also welcome to answer in German...! ;-)

Don't know that any of these are specifically what you are looking for but they
might be good leads. I haven't used any of the DS USB adapters yet but I don't
expect it would be too difficult to put together a basic driver in LV.
Matt
NI:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=D3436B0F136A19B3E034080020E74861
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=C44EF95239243BF9E034080020E74861
non-NI:
http://embeddeddatasystems.com/page/EDS/PROD/SOFTWARE/SW-ONESIX

How I can wire an extern WebService to BPEL?

I have started to work with BPEL PM (2.0.10) bbpelz 0.0.95. Now I would
understand how I can wire an extern WebService (like a PLSQL WebService
created in JDeveloper from a package) to BPEL.
Therefore I look for Examples from BPEL - AmazonFlow or GoogleFlow. Then I set the ProxySettings in the orabpel\bin\obsetenv.bat. I've got the error:
BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error]: CompilationError
[bpelc] [Description]: in line 0 of "bpel.xml", Failed to read wsdl.
[bpelc] Error happened when reading wsdl at "C:\Programme\oracle_sw\orabpel\samples\demos\GoogleFlow\GoogleSearchRef.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error reading file: No route to host: connect".
[bpelc] Make sure wsdl exists at that URL and is valid.
[bpelc] .
[bpelc] [Potential fix]: .
[bpelc] .
BUILD FAILED: C:\Programme\oracle_sw\orabpel\samples\demos\GoogleFlow\build.xml:29: Validation error
On my Laptop - there is'nt a Proxy, and the versions are: bpel pm 2.1.1
bpelz 0.9.10
I've got the error, when built the AmazonFlow:
[bpelc] [Error] AmazonWebServices.wsdl:9:45: src-resolve.4.2: Error resolvin
g component 'soapenc:Array'. It was detected that 'soapenc:Array' is in namespac
e 'http://schemas.xmlsoap.org/soap/encoding/', but components from this namespac
e are not referenceable from schema document 'http://soap.amazon.com/schemas3/Am
azonWebServices.wsdl'. If this is the incorrect namespace, perhaps the prefix of
'soapenc:Array' needs to be changed. If this is the correct namespace, then an
appropriate 'import' tag should be added to 'http://soap.amazon.com/schemas3/Ama
zonWebServices.wsdl'.
Who can help me, make run the samples AmazonFlow and GoogleFlow?
Where can I find more informtions about the Problem, how I can wire a WebService created in JDeveloper to BPEL? I can deploy the WebService from JDeveloper on the BPEL-OC4J-Server- but what have I to do or to integrate in order to see my WS in BPEL console and have access to it in bpel designer?
Regards Sabine

Hi,
I followed your suggestion and linked my BPEL service to a WebService through the WSDL that is remotely accessible as in "{color:#0000ff}http://localhost:8988/scratch/kibailey/view_storage/kibailey_SOA/.jdev_user_home/mywork/OptyEventsService/Model/classes/EventsAMService?wsdl{color}" instead of directly accessing the WSDL file. This Webservice is of course deployed at the above mentioned server and location and the server is up.
But when I run my BPEL process, I still get this message "{color:#ff0000}Reference EventsAMService does not exist as wire target{color}". I have cross checked other WSDL dependencies and they are fine.
I am currently using JDev 11g drop 6 through ADE (linux). I have exposed a BC4J component (Application Module) as a WebService.
Please let me know of any resolution.
With regards,
Kishan

How would BT wire a new line to my property for £1...

Hi guys, it's question time for me this week .
Anyway, does anyone have a clue on earth how BT would wire a second line to my property for £124.99? My primary line is a pavement one and there are no telegraph poles near my property. The good ol' street cabinet is around 100 meters up the street.
Thanks for your help answering my curious questions hehe
Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

Thought so... I couldn't imagine them digging up an entire pavement and laying the new material over it once the cable has been placed
Thanks for your quick response
Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

How to verify which temp sensor is reading which component

I am currently using speedfan with my K8N Neo Platinum and I cannot tell which temp reading goes with which sensor. How can I determine which sensor is reading which so I can label each of them?

my temp readings with speedfan 4.21 and bios 1.5. all temps are full load.
temp1 33c
temp2 44c
temp3 54c
temp1 for me is the nb for sure. temp2 is the cpu and temp3 is i have no clue. it varies between 53 and 54c not dependent on load. nb temp is confirmed with a case temp sensor at the base of the zalman passive heatsink and verified by touching teh heatsink. temp2 is for sure cpu cause it goes down to 31c at idle. as for temp3 i've felt around my mobo for hotspots and i can't really find anything hot cept for the little regulator below the 20 pin connector. thouhg it's certainly not at 54c it very well could be 45 based on finger touching. oddly enough with bios at 1.5 the 54c was much lower as i don't remember the flames. i flashed to a couple of different beta bioses only to find them unstable so i went back to 1.5 and the flames remained from the beta bioses. but as i said they weren't there before i tried the betas.
oh and harddrive is reading 38c not that it's relevant.

When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

Remove all apps from multitasking bar. Double click Home button then tap and hold an icon and tap on little x on every app. Then reset. Hold down Home and Power button until Apple logo appears.

I just got the mid 2011 macbook air and it does not have ilife or iPhoto on it...isnt it supposed to come with it? and if it does then how do i get it on the mac without having to pay for it in the app store?

I just got a macbook air and i thought that it was supposed to come with ilife already installed? But there is not ilife apps...how do i get it on the laptop without having to buy them all from the app store if it was supposed to come with it?

From the iPhoto Licence:
3. Transfer.
A. Apple Software obtained from the Mac App Store is not transferable. If you sell your Apple-branded hardware to a third party, you must remove the Apple Software from the Apple-branded hardware before doing so.
B. For any preinstalled Apple Software, you may make a one-time permanent transfer of all of your license rights to the Apple Software (in its original form as provided by Apple) to another party, provided that: the Apple Software is transferred together with your Apple-branded hardware; (ii) the transfer must include all of the Apple Software, including all its component parts, printed materials and this License; (iii) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; (iv) you have not associated the Apple Software with your Mac App Store account as set forth in Section 2B; and (v) the party receiving the Apple Software reads and agrees to accept the terms and conditions of this License.
If the previous owner accepted the preinstalled software (iPhoto, etc) to the AppleID, it cannot be passed on to a new owner. Even if the previous owed would use her or his Applied to install it for you, you would never be able to reinstall it or to update it.
In that case buy your own copies of the software.

I lost my iphone, or someone stole it... when i go to find my iphone on my tablet it says that my phone is offline. How do i ge my phone online without actually having it wth me? and is there anyway i can back up my photos without having it?

i lost my iphone, or someone stole it... when i go to find my iphone on my tablet it says that my phone is offline. How do i ge my phone online without actually having it wth me? and is there anyway i can back up my photos without having it?

What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

How do you highlight multiple documents rapidly, rather than having to click on the document and on "command" one at a time?

How do you highlight multiple documents rapidly, rather than having to click on the document and on "command" one at a time? Right now, when I'm trying to highlight documents to export, I have to click on each document individually. Is there a way to highlight one document while scrolling down the list until all desired documents are highlighted? I would like to rapidly be able to do this to save time when I am exporting or saving multiple files from my documents to an external drive, CD-Rom or cloud storage.

Click on the first item
Hold the Shift key
Click on the Last Item.
All the items in between will be selected.

How do i delete a song from iCloud without having to subscribe to it?

How do I delete a song from icloud without having to subscribe to it? I've deleted the song from my iphone and my computer, but it is still in icloud, but I can not delete it. It keeps on wanting me to subscribe to icloud. Which it is not fair or right for me to have to pay to delete something. Would anyone please help me? I am using windows 7 home premium 64bit Operating system. The song is stil showing on my iphone, but i need to delete it from icloud for it to not show on my iphone.

Hi,
If the song has been purchased from itunes store, you cannot delete the song from the cloud but you can hide it. - http://support.apple.com/kb/HT4919.
You do not need to subscribe itunes match which is a different product from itunes in the Cloud.
Jim

How to open cd/dvd drives mac pro without having a apple pro keyboard

how to open cd/dvd drives mac pro without having a apple pro keyboard

Go to System/Library/CoreServices/Menu Extras and double click the Eject.menu item to add an eject icon to your menu bar.

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

My link preview has disappeared from the bottom left of the page (it no longer pops up when I hover over a link.) Thoughts on how to get it back? I really LIKE having it!

My link preview has disappeared from the bottom left of the page (it no longer pops up when I hover over a link.) Thoughts on how to get it back? I really LIKE having it!

It is possible that the screen is too high and that the scroll bar and the find bar and add-on bar fall off at the bottom.
If that works then close Firefox (File > Exit/Quit) to save that setting.
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
If the above didn't help then see:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

How to find out the BI Publisher Version from the Excel output file

Hi,
Can any one tell me How to find out the BI Publisher Version from the Excel output file generated using BI publisher.

Take a look at it in notepad or a text viewer... it's just a MIME/HTML file...
Example:
From: "Created by Oracle BI Publisher 10.1.3.4.0" <>
Subject: Created by Oracle BI Publisher 10.1.3.4.

How to find out the BI Publisher Version from the Excel output generated.

Hi
Can any one tell me How to find out the BI Publisher Version from the Excel output file generated using BI publisher.
Edited by: 781689 on Aug 1, 2010 10:22 PM

Hello,
This forum is the "Oracle Reports" OTN Forum.
The "BI Publisher" OTN Forum is here :
BI Publisher
Regards

How do i wire a sensor to my daq having pulse output

Similar Messages

Maybe you are looking for