How do i work around 2 different frame rates in same sequence??

hello,
a client of mine just shot a video using two frame speeds...24PA and regular 24p.
how can i get around this? so far i captured the 24PA footage using the pulldown in the FCP, and the 24P in a regular 48k capture...
i am currently editing in a 23.98 timeline, but the 24p footage looks slower...HELP!
thanks,
steve

hi kyle,
sorry, but just to elaborate on your response a little while ago here:
- i captured the 24PA footage using the advanced pulldown
- i captured the 24P footage using no pulldown
- i am editing in a 29.97 timeline now, as most of my footage was shot with 24P
please let me know your thoughts on how i should go about working with this footage!
thanks!
steven

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

When I try to open a file I created in Pages, I get this: "The required index.xml file is missing." This has happened many times and I have forgotten how I've worked around it.

When I try to open a file I created in Pages, I get this: "The required index.xml file is missing."
This has happened many times and I have forgotten how I've worked around it.

That is wrong advice and you appear to have repeated it all over the forum.
All Pages files no matter what version have the same file extension, .pages, despite being radically different formats and that is the problem. The System does not distinguish between them when you double click on the file, it opens the first version of Pages it encounters.
You need to right click on the file and choose the correct App version for the file. Unfortunately there are no clues to tell you which is which.
If you are unhappy with this and the removal of over 100 features plus the problems with transmitting files across devices, servers and different versions of OS X, rate/review Pages 5.5.2 in the App Store.
Peter

Re-connecting media to different frame rate clip

Hi guys,
Wondering whether anyone can help me out to solve an error I've made...
So, I've basically completed an edit (some episodes on Final Cut Pro X, some on Final Cut 7) only to find out that I'd transcoded the media at the incorrect frame rate, 23.98 instead of 25fps. Yup, pretty big error. And now I need to redeliver the projects in the 25fps format.
I've transcoded a clip to the correct 25fps rate and tried to reconnect that clip to the 23.98fps one in the timeline, but I'm unable to reconnect as the clips are of differing frame rates.
Has anyone got any ideas how I can reconnect the clips or any suggestions that will make this situation easier to rectify rather than copying out the entire edit which will cause me to spend a week crying into my keyboard.
Thanks in advance for any suggestions.
Olly

Hmmm...
Tried this but it brings in the media that is 23.98 and there's no way I can tell to link to the new 25fps clips. Unless there's anything else I can do? Any other way to match the clips? (the 25fps clips are that little bit longer in duration) I also have some edits in fcp7. By using cinema tools in that would I be able to change the frame rates and link up to the new 25fps?
Cheers for the advice though Russ, this way does give me the template of the 23.98 edit so that I can match the new 25fps shots to, but it's gonna be a long process.

Relink project clips with different frame rate

Somehow the clips in my project sequence ended up with a different frame rate (25) than the original media files (23.95), and they are no longer linked -- maybe this happened during import from iMovie. When I try to relink project files to source media, I get an error message saying they cannot be relinked because they have a different frame rate. I changed the sequence framerate to 23.95 (by creating a new project with 23.95 as the frame rate, then copying and pasting the other timeline into it), but all the clips remain at 25, so the problem remains.
How can I change the clip properties to frame rate 23.95 so I can link to the original media?
Thanks.

The media got unlinked importing the project and events from iMovie to Final Cut.
I've attached screen shots with all the specs.

HT1751 On an old Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean? And how do I work around it?

On an older Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean? And how do I work around it?

I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

Two timecode stripes at different frame rates? (and other BITC stuff)

I'm not an FCP user, but I'm working with an editor who's not that up on the finer points of FCP operation. Would like to know if certain things are possible...
1a. Is it possible for FCP to simultaneously output a QT file with two different BITC stripes running at different frame rates (say, 29.97 fps and 23.976fps)? Or...
1b. For an already BITC'd work print (striped with 23.976 timecode) is it possible to add a second stripe at 29.97 fps, synchronized from the 1-hour mark (first frame of picture)?
2. Are there any parameters available in FCP to adjust the size of the numbers and the position of a timecode stripe?
3. BONUS QUESTION: what does the "R" in "TCR" mean? (just curious -- I've seen this for years but never knew what the "R" stood for).
Message was edited by: iSchwartz

iSchwarz!
Welcome to the visual side of things. Never thought I'd see you venture out of Soundtrack Pro and Logic land, glad to see you here.
3. R stand for Reader. TimeCodeReader. G will stand for Generator. TimeCodeGenerator
2. You mean adjust the TCR window? If you drop the filter on a clip, load that clip into the viewer, you can adjust the filter parameters there.
1b. BITC? There are 2 type of timecode that I'm aware of: VTC (or ViTC)(Vertical Interval Timecode) and LTC (Longitudinal Timecode). I seriously doubt this as then FCP would have to use to different timebases within the same sequence.
1a. Again, I seriously doubt this do to the different timebases.
You could print to tape this 23.976 fps sequence which FCP would add the pulldown resulting in 29.97 fps timecode and then import that. Or, maybe Compressor can add the pulldown and export a file wtih 29.97 fps timecode. Don't know, never needed to try that.
Good luck, report back with your findings.
Zeb

Help with sequence settings in final cut for project with 2 different frame rates.

I really need help with this one! I finished editing a wedding video and realized after exporting that it was filmed in two different frame rates. This has happened before but I converted the footage to match and fixed the problem. In this case, the footage is part 30fps and part 60fps. The majority of it was filmed in 30fps. I cannot convert the 60 to 30 without the slow motion effect which I do not need so I have to find a way to burn this to a DVD without it looking messed up! The video was shot with two Canon 7ds if that helps anything. The first sequence I set at 29.97 and exported as a quicktime movie and all the footage filmed in 60 looked perfect and the footage in 30 looked jittery. Then I tried the sequence at 59.97 and it switched. The footage filmed at 30 looked good and the 60 was cropped in. I am so confused! Any advice or suggestions would be greatly appreciated!!

Thanks for your help Michael! The frame rates are 29.97 1920 x 1080 and 59.94 1280 x 720. I did a control click on the clips in final cut and viewed the item properties/format to find this info. The Canon 7d is a DSLR but we use it for video. As for my workflow, the first thing I do is import the footage onto my computer and then drag the clips into mpeg streamclip. I choose apple prores 422 and uncheck the interlaced box. Once this is done I import the .mov files into final cut. The sequence automatically sets itself to whatever clip I drag in first so it originally set as 29.97. When I finished editing wedding video, I export it to a quicktime movie and choose whatever settings match the sequence, in this case apple prores 422 1920 x 1080 30p. Once that is done I use iDVD to burn the discs.
I knew something was wrong when I watched the quicktime movie and all the 30fps footage was jittery and most of the cross dissolves looked strange. That's when I figured out the footage was at two different frame rates. What I don't understand is why whatever the sequence is set at in final cut, the clips of the opposite frame rate look right but the clips set at the matching frame rate don't???

Different frame rate in movie mode? iPhone 4

I noticed that my iPhone shoots video clips with different frame rate from time to time. I suppose it slows frame rate on dark shots. For now all of my daylight shots are 30 fps, while night or dark ones are 25 and 24. This makes it hard to edit clips in iMovie for example, because difference in frame rate causes strobe motion effect on output.
!http://pics.livejournal.com/brain_away/pic/000040rc!
!http://pics.livejournal.com/brain_away/pic/00003s3c!
Anybody have the same?
For reliable results I would suggest to shoot two clips: one in sunny daylight conditions, another with ordinary room lightning, maybe a little darker than normal.
Please let me know of the results. Thanks

Doesn't seem to be just a Quicktime bug:
!http://pics.livejournal.com/brain_away/pic/00005gw1!
+Created on: 12.09.2010 22:42:50 Московское летнее время
Report for file: IMG_0206.MOV
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AAC LC-PS
File Format.......................................MPEG-4
Play Time.........................................10s 193ms
Total File Size...................................12.9 MiB
Total Stream BitRate..............................10.6 Mbps
Encoded with......................................4.1
Encoding Library..................................Apple QuickTime
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................1 280 pixels
Frame Height......................................720 pixels
Frame Rate........................................24.697 fps
Total Frames......................................251
Display Aspect Ratio..............................16:9
Scan Type.........................................Progressive
Color Space.......................................YUV
Codec Settings (Summary)..........................1 Ref Frames
QF (like Gordian Knot)............................0.465
Codec Settings (CABAC)............................No
Codec Settings (Reference Frames).................1
Video Stream Length...............................10s 163ms
Video Stream BitRate..............................10.6 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................12.8 MiB (99%)
Video Stream Title................................Core Media Video
Date of Original Encoding.........................UTC 2010-09-12 04:13:59
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio Stream #1
Codec.............................................AAC
Codec (FourCC)....................................40
Audio Stream Length...............................10s 193ms
Audio Stream BitRate..............................64.0 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................2
Audio Channel's Positions.........................Front: L R
Sampling Rate.....................................44.1 KHz
Audio Stream Size.................................79.4 KiB (1%)
Audio Stream Title................................Core Media Audio
Date of Original Encoding.........................UTC 2010-09-12 04:13:59+
+Created on: 12.09.2010 22:43:06 Московское летнее время
Report for file: IMG_0194.MOV
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AAC LC-PS
File Format.......................................MPEG-4
Play Time.........................................16s 579ms
Total File Size...................................21.0 MiB
Total Stream BitRate..............................10.6 Mbps
Encoded with......................................4.1
Encoding Library..................................Apple QuickTime
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................1 280 pixels
Frame Height......................................720 pixels
Frame Rate........................................29.970 fps
Total Frames......................................496
Display Aspect Ratio..............................16:9
Scan Type.........................................Progressive
Color Space.......................................YUV
Codec Settings (Summary)..........................1 Ref Frames
QF (like Gordian Knot)............................0.383
Codec Settings (CABAC)............................No
Codec Settings (Reference Frames).................1
Video Stream Length...............................16s 550ms
Video Stream BitRate..............................10.6 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................20.9 MiB (99%)
Video Stream Title................................Core Media Video
Date of Original Encoding.........................UTC 2010-09-12 02:45:06
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio Stream #1
Codec.............................................AAC
Codec (FourCC)....................................40
Audio Stream Length...............................16s 579ms
Audio Stream BitRate..............................64.0 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................2
Audio Channel's Positions.........................Front: L R
Sampling Rate.....................................44.1 KHz
Audio Stream Size.................................129 KiB (1%)
Audio Stream Title................................Core Media Audio
Date of Original Encoding.........................UTC 2010-09-12 02:45:06+

How can I interact between two different frames in the same indesign template as well as from one template to another.

I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.

There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP

Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers !

Home Sharing turns off as soon as my computer enters sleep mode. How can I work around this issue?

Home Sharing turns off as soon as my computer enters sleep mode. How can I work around this issue?

please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.
for some background on that issue you can also refer to [https://bugzilla.mozilla.org/show_bug.cgi?id=812683 bug #812683]

HT202919 I need to update my ARD admin from 3.6 to 3.7 but client is at 3.8 and it errors out. How do I work around this?

I need to update my ARD admin from 3.6 to 3.7 but client is at 3.8 and it errors out. How do I work around this?

This is a concern amoung many corporate users. It's going to take somekind of policy change with apple.
Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number

My school uses ms12 i just purchased ms13 how do i work around

my school uses ms12 i just purchased ms13 how do i work around

it is multisim. i need to convert my homework that i did in ms13 the newest vesion to multisim 12., i understand the software is not backward compatible.
larry

Working with multiple frame rates

Hi- I unfortunately am dealing with a project where I'm dealing with potentially 3 different frame rates. I have some shot at 29.97ndf, some HDV captured using 1080i60 and some P2s converted for FCP and are at 23.98.
I understand that FCP 6 can handle different frame rates in the same timeline, so... are all these different rates something I need to be concerned with? I'll need to cut these together into a single montage and my end product will be a DVD.
Thanks for your help.
Robert

Thank you guys. Any specific ProRes? (there are so many of them). So... does this mean when I render it at 29.97 for NTSC all the 23.98 footage is going to get speed up like chipmunks?
Thanks again.
Robert

How do i work around 2 different frame rates in same sequence??

Similar Messages

Maybe you are looking for