How do I work on my raw files and not the jpeg files that currently dispaly

When I launch Aperture my pictures display in jpeg format, I do however take all my pictures in both raw and jpeg. How do I convert and work on the raw files? Is my interpretation that I am working on my Jpeg files correct?
My thanks for any help provided.

The preference to import both and use RAW vs. JPEG as master can be set on import and you can convert on a project-by-project basis.
You can tell what Aperture is using a few different ways. If you select the meta-data tab then show the "File Info" (the pull-down menu) it'll show you exactly which file it's using as the master.
Also if you right-click over the mouse you'll see one of the pop-up menu options to "Set JPEG as Master" or "Set RAW as Master" (it'll show whichever one you aren't using -- so if it offers to "Set RAW..." then that means it's currently using JPEG.
To convert a whole project, it's as gocuk says in the reply above.... select the "Library" tab at left, make sure you highlight the Project you want to convert, then in the menubar pick "Photos" -> "Switch Project to use RAW as Masters" (which will only be bold and selectable if it's currently set to use JPEG).

Similar Messages

  • How do I extract email from a form and send the PDF to that user?

    How do I extract email from a form and send the PDF to that user?

    here you can add email to send to, CC, Subject, and body message
    var oDoc = event.target;
                        oDoc.mailDoc({
                                                                bUI: false,
                                                                cTo: "Agency Contact Email",
                                                                cCC: "",
                                                                cSubject: "Write your title here,
                                                                cMsg: "Dear" + AgencyContact + "(" + AgencyContactEmail + ")\nThe student, " + FirstName + " " + LastName + " has applied to work at your agency. Please confirm they can work here blah blah blah.......\n\nThanks.\n\nrespectuflly,\n\nme"

  • What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

    What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

    What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

  • How do I rotate one clip in timeline and not the rest

    When I rotate one clip in the timeline 90 degrees it rotates all the clips 90 degrees.

    Bear5067
    If all the clips have the same color title bar, you are selecting all the clips at one time or none of the clips is selected. You need to select only the one that you want to rotate otherwise you will get what you are getting, that is, all the clips rotated instead of just the one. Is your mouse working so that clicking on a clip with it selects the clip?
    Based on how I interpreted what you wrote, we need to zero in on the clip selection. Please try again, and, if you have not already, expand the Timeline so that you can see its contents and clip distinctions. For expanding the Timeline content view, please refer to the -+ slider above the Timeline as shown in the right sector of the following screenshot
    The -+ slider has an icon on either side of it, one is named Zoom Out (- ) and the other on the right Zoom In (+ ).
    In the screenshot here, the two clips have the darker blue color indicating neither is selected at this point.
    Please review, and then we can decide what is going on with the clip selection process in your workflow.
    Thanks for the follow ups.
    ATR

  • How do I select a section of stills and NOT the transitions?

    Okay - I'm switching from iMovie6 to 11 and I'm struggling doing the things that were 2nd nature to me! I'm trying to adjust the duration and when I select a section, I can't change it as it also include the transitions. Is there way to do select just the stills?
    Thanks!

    Haha, as an update, I found out that it does play from the beginning now, however it still doesn't seem to loop. When it reaches the end it loops back to the very start and plays from the beginning, ignoring the front of that section that comes up when I press the loop button. I'm wanting that one section to loop, not the whole thing. Anyway, I found some hlpful tutorials, but I am still seeking a bit of help with that loop button. How do I make multiples instances with it? That is, after I figure out how to make that section loop in the first place.

  • How do I download Firefox to a disk and not the hard drive?

    My computer had virus/worm etc. Internet explorer was damaged and can't access the internet. Need to download from another computer. Want to download Firefox to a disk. How do I do this?
    Thank You!

    Not sure what the issue is,however latest releases are here:
    [http://www.mozilla.com/en-US/firefox/all.html]
    from there you can save the installer on any removable drive using another computer ("save as",then choose the drive),then try to install it on your pc.

  • HT4915 How do you delete music from your phone and not the cloud?

    How do you delete musci from your phone (not the cloud or your computer)

    Swipe to delete is one way... or in your setings you can delete ALL your music.

  • How do you see individual tv show episodes and not the cover for the tv show in cover flow?

    I used iFlicks to import some of my TV series to iTunes. I then selected the cover flow view because its easier to see when sitting on the coach. The only problem i've got is that iTunes shows covers for each TV series but I can't seem to find a way to see how many episodes are in a series and how to select that episode. This is specifically for cover flow view. I took screenshot that shows Season 1 of Alphas that consists of 5 episodes:
    [IMG]http://i1219.photobucket.com/albums/dd432/vmoodleyzaf/ScreenShot2011-12-21at1933 27.png[/IMG]
    As you can see in the screenshot, there's no indication of the episodes contained within the series. If anyone has any ideas about this, i'd really appreciate it.

    If you are in Cover Flow view, fullscreen, selecting the cover only plays the first episode of the series. I even tried downloading an entire season from iTunes and it does the same thing. Obviously, iTunes names the episodes and season numbers correctly. If I press the skip button on the remote while watching an episode, it jumps to the next episodes without showing any info about the new episode. Please note that this is in fullscreen mode. If I exit fullscreen mode, then a list of episodes is shown below the cover of the tv show. However, that list is not viewable from a distance.

  • How do I open nikon D3300 raw files?

    How do I open Nikon D3300 raw files?

    I have elements 12. Downloaded 8.4 dng converter
    Hope that works.
    Sent from my iPhone

  • How can I view my 6D raw files before I open them in post processing?

    How can I view my 6D raw files after I load them on my computer & before I open them on a post processing Program?
    I have no problem doing that with my 1DX,1DIV or 5Dmk III. This problem exist with any sdhc card I use on the 6D, but not on any other camera with the same cards.
    Solved!
    Go to Solution.

    Your computer doesn't have camera RAW support installed for a 6D.  RAW isn't really a standard-format... it's more of a concept.  Every individual camera has it's own unique RAW format (even though they all have the same .CR2 extension).
    Each time a new camera comes out, companies that make RAW processing software will make an update available that adds that camera.  You'll need to get that update and install it.
    Tim Campbell
    5D II, 5D III, 60Da

  • In camera raw how large should I open my raw file before converting it to a TIF file?

    in camera raw how large should I open my raw file before converting it to a TIF file---2736 x 3648 (10.0 MP), 3072x4096 (12.7 MP) or 3840x5120? (19.7 MP).  I want a sharp TIF file.   I'm shooting with an Olympus E-510, 10.0 MP camera?
    thanks - Ken
    [email protected]

    rasworth wrote:
    There is no advantage to saving or opening other than at the native resolution.
    Actually, not entirely true. In the case of Fuji DSLR's you would do better to double the rez in Camera Raw as that matches the interpolation that the Fuji software does in their higher quoted "effective resolutions"(it ain't real resolution mind you but it can benefit certain image types).
    If you know for an absolute fact you need more resolution than the native file has, you really might want to test upsampling in Camera Raw as it has a newly tuned upsample (put in in ACR 5.2) that is an adaptive Bicubic algorithm that is either the normal Bicubic or Bicubic Smoother depending on the size–and that's something even Photoshop can't do.
    But in general unless you know for a fact you need the image bigger (or have a Fuji camera) processing at the file's native size is the most efficient.

  • How to convert RAW files that saved in UCCX server to wav file?

    Hi all,
    How we can covert the RAW files that are saved in UCCX server to wav file by using command prompt in UCCX servers. Or is there some other way? So that we should be able to hear the sound of these files.
    C:\Program Files\Cisco\Desktop_Audio
    Regards
    Ali Raza

    Hi,
    I use Switch File Audio Convertor from NCH Software to do this.
    It is a commercial product but there is a time limited evaluation and if you decide to keep it it is only $30.
    http://www.nch.com.au/switch/index.html
    It is great for converting audio files to the correct format for music on hold as well.

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

    How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

    Jeannot7 wrote:
    I'm interested in seeing who gets the D7100 support first? Apple or Adobe!! I will go with the one that gets it out first.
    FWIW,
    Adobe keeps a quarterly release schedule for RAW updates. The current Lightroom 4.4 RC expires on 5/31/2013 which typically is an indication that the official release will be close to that date. According to the current list of new supported cameras, the Nikon D7100 is not slated to be supported (but that could change on release).
    http://labs.adobe.com/technologies/lightroom4-4/?tabID=details#tabTop
    The most likely time frame for Adobe support of the D7100 will be sometime in August or September 2013 (although there will probably be a Lightroom 4.5 RC available prior to that for testing purposes).

  • How can i open Nikon D610 RAW files in Element 12 ?

    How can i open Nikon D610 RAW files in Element 12 ?

    You need the ACR 8.3 plug-in to open D610 NEF files.
    Check what Help / About Plug-ins / Camera Raw reports for the version number. 
    If it is something less than 8.3, update to the ACR 8.3 plug-in using Help / Updates from the Editor.  If that says there are no updates, then uninstall and re-install and try again.
    If it is already ACR 8.3 then the files are likely corrupted by using an obsolete version of Nikon Transfer or ViewNX with them.
    You can fix that corruption using a utility from the following webpage, where 14-bits is likely what you’d want to specify, and only use Nikon utilities that are as new as your camera:
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

Maybe you are looking for