How do i write the sign " inside a String?

i need to use the sign " as a delimiter in StringTokenizer.

try using backslash for escape character: \"

Similar Messages

  • How do I write the contents of a string array to file?  Is there a package

    freely avaliable to do this? I am writing a console program that will save the selections made to file. I have convenience packages that came with my book, it allows int and double arrays to be written to file, but not string arrays. Any help would be greatly appreciated.
    Thanks,
    Joe Lavender

    One easy way to do this is to populate a Properties object with the index as the key and the element as the value.
    The properties has built in methods for writing it to file and reading it in.

  • How can i write the below code using "For all entries"

    Hi
    How can we write the below code using "for all entries" and need to avoid joins...
    Please help
    SELECT aaufnr aobjnr aauart atxjcd a~pspel
    agstrp awerks carbpl cwerks
    INTO TABLE t_caufv
    FROM caufv AS a
    INNER JOIN afih AS b
    ON aaufnr = baufnr
    INNER JOIN crhd AS c
    ON bgewrk = cobjid
    AND c~objty = 'D'
    WHERE ( a~pspel = space
    OR a~txjcd = space
    OR NOT a~objnr IN
    ( select OBJNR from COBRB AS e
    WHERE objnr = a~objnr ) )
    AND a~werks IN s_plant
    AND a~auart IN s_wtype
    AND NOT a~objnr IN
    ( select OBJNR from JEST AS d
    WHERE objnr = a~objnr
    AND ( dstat = 'A0081'OR dstat = 'A0018' )
    AND d~inact 'X' ).
    Reward points for all helpfull answers
    Thanks
    Ammi.

    Hi,
    SELECT objnr objid aufnr
            from afih
            into table t_afih.
    SELECT objnr
            from JEST
            into table t_JEST
            where stat = 'A0045'
               OR stat = 'A0046'
               AND inact 'X'.
    SELECT objnr
            from COBRB
            into table t_cobrb.
    SELECT arbpl werks objid objty
          from crhd
          INTO table it_crhd
          FOR ALL ENTRIES IN it_afih
          WHERE objty eq 'D'
          AND gewrk = it_afih-objid.
    SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
            FROM caufv
            INTO table t_caufv
            FOR ALL ENTRIES IN it_afih
            WHERE aufnr = it_afih-aufnr
              And pspel = ' '
              AND txjcd = ' '
             ANd objnr ne it_crhd-objnr
              AND auart in s_wtype
              AND werks in s_plant.
             AND objnr ne it_jest-objnr.
    dont use NE in the select statements, it may effect performance also. Instead use if statements inside
    loops.
    loop at t_caufv.
    read table it_chrd............
      if t_caufv-objnr ne it_chrd-objnr.
      read table it_jest..........
       if   if t_caufv-objnr ne it_jest-objnr.
        (proceed further).
       endif.
      endif.
    endloop.
    hope this helps.
    Reward if useful.
    Regards,
    Anu

  • How can I write the analogous code to the logic:iterate tag functionality

    Hai This is Rayalu .And I am very new to the Java World. I have a doubt?.How can I write the analogous code to the<logic:iterate> tag functionality using the JSP Tag Libraries . Pleae Send me some examples .

    Hi,
    SELECT objnr objid aufnr
            from afih
            into table t_afih.
    SELECT objnr
            from JEST
            into table t_JEST
            where stat = 'A0045'
               OR stat = 'A0046'
               AND inact 'X'.
    SELECT objnr
            from COBRB
            into table t_cobrb.
    SELECT arbpl werks objid objty
          from crhd
          INTO table it_crhd
          FOR ALL ENTRIES IN it_afih
          WHERE objty eq 'D'
          AND gewrk = it_afih-objid.
    SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
            FROM caufv
            INTO table t_caufv
            FOR ALL ENTRIES IN it_afih
            WHERE aufnr = it_afih-aufnr
              And pspel = ' '
              AND txjcd = ' '
             ANd objnr ne it_crhd-objnr
              AND auart in s_wtype
              AND werks in s_plant.
             AND objnr ne it_jest-objnr.
    dont use NE in the select statements, it may effect performance also. Instead use if statements inside
    loops.
    loop at t_caufv.
    read table it_chrd............
      if t_caufv-objnr ne it_chrd-objnr.
      read table it_jest..........
       if   if t_caufv-objnr ne it_jest-objnr.
        (proceed further).
       endif.
      endif.
    endloop.
    hope this helps.
    Reward if useful.
    Regards,
    Anu

  • I changed my password to use migration to transfer files from a G4 to a new macbook pro but now I have to sign in every time. How do I avoid the sign in?

    I changed my password to use migration to transfer files from a G4 to a new macbook pro but now I have to sign in every time. How do I avoid the sign in?

    I clicked on keychain access but getting a warning that it quit unexpectedly and it won't reopen.

  • How do I remove the (-signed) which Adobe adds to the end of the document name after having signed it?

    Hi there,
    How do I remove the (-signed) which Adobe adds to the end of the document name after having signed it?
    It is not convenient to remove it every time I sign a document. So, is there a way to turn this off?
    Thank you

    I think you cannot, because for many people it is so important to keep the unsigned document, and most do not realise this until it is too late.

  • How can we write the code for opening the command prompt and closing the

    how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

    rakeshsikha wrote:
    how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

  • How do we write the syntax to show the default values in other languages

    Hi, we have siebel ondemand in 3 different languages-Mandarin, English, and Korean.
    We need to sett he default value of SR Status= Open (for English user), Open in Mandarin 进行中(for Mandarin user) and Open in Korean 진행중(for Korean user).
    how do we write the syntax?
    (if we simply put "Open", the there is an error message when Korean user open the service request )
    Thanks, Sab

    Use LookupValue function. It is documented in help file.

  • How can i write the floats value in Unitronics vision230 plc using modbus Ethernet

           How can i write the Float value in unitronics Vision230 PLC usinsg modbus ethernet (MB Ethernet Master Query.vi) I  read and write  the 32 bit register,  for e.g i want to write the 23.45 value on 2nd add. of MF. And MF register is 32 bit register. I  read and write  the 32 bit register.
    Narendra.
    Solved!
    Go to Solution.

     Thanks Amit for your solution but i can not use the string to write the value because  MB Ethernet master Query.vi only accepet the integer value its not take string values or any other i.e floats values etc.....otherwise i have  no problem to write or read the 32 bit register values , only problem is that the MB Ethernet master Query.vi only accept the integer value there4 how can write the float value.
    Narendra
    Message Edited by Artemistech on 01-30-2009 11:06 PM

  • How can i write the trigger for Global Temporary Table

    Hi Grus,
    How can i write the trigger for Global Temporary Table.
    I was created the GTT with trigger using the below script .
    CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
    EMP_C_NAME VARCHAR2(20 BYTE)
    ON COMMIT PRESERVE ROWS;
    CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
    BEFORE DELETE OR UPDATE OR INSERT
    ON GLOBAL_TEMP
    REFERENCING NEW AS NEW OLD AS OLD
    FOR EACH ROW
    BEGIN
    INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
    END;
    trigger was create successfully, but the wouldn't insert into to EMPNAME Table..
    Please guide whether am correct or not? if not kindly give a correct syntax with example
    Thanks in Advance,
    Arun M M

    BEGIN
    INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
    END;
    you are referencing old value in insert stmt.
    BEGIN
    INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
    END;then run ur application it works fine...
    CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
    EMP_C_NAME VARCHAR2(20 BYTE)
    ON COMMIT PRESERVE ROWS;
    CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
    BEFORE DELETE OR UPDATE OR INSERT
    ON GLOBAL_TEMP
    REFERENCING NEW AS NEW OLD AS OLD
    FOR EACH ROW
    BEGIN
    dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo');
    INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
    dbms_output.put_line(:OLD.EMP_C_NAME);
    END;
    create table EMPNAME as select * from GLOBAL_TEMP where 1=2
    insert into GLOBAL_TEMP values('fgfdgd');
    commit;
    select * from GLOBAL_TEMP;
    select * from EMPNAME;
    output:
    1 rows inserted
    commit succeeded.
    EMP_C_NAME          
    fgfdgd              
    1 rows selected
    EMP_C_NAME          
    fgfdgd              
    1 rows selectedgot it Arun
    Edited by: OraclePLSQL on Dec 28, 2010 6:07 PM

  • How do we write the sub routines in smart forms?

    1) How do we write the sub routines in smart forms?
    2) What is the’ form interface’ in smart forms?
    3) Write down the path for writing for select queries in smart forms?
    4) How do we put dynamic page break in smart forms?
    5) in which system field contain the total page number of all forms in the currently processed print request in smart forms?
    6) What is the name of function module used to calling smart forms?
    1)     What is the functionality of function module ‘controal_form’?
    2)     How do we print the system date in this format ’15th Jan 2008’ on scripts?
    3)     What r the various print modes available in scripts?
    4)     What is the tcode for text element?
    5)     How do we draw horizontal line in scripts?
    6)     How can we suppress the leading zeros for a field in scripts?
    7)     In which system field is used to print current no page in scripts?
    Which f.m is used to reads text in sap scripts

    1) How do we write the sub routines in smart forms?
    after opening form see global definitions
    click on that there one tab called form routines inthat you can write subroutines logic.
    You can call in program lines .
    2) What is the’ form interface’ in smart forms?
    It is an interface between program and form .
    like function module we provide import,export,tables,exceptions
    Based on import and export parameters form will display for us.
    3) Write down the path for writing for select queries in smart forms?
    On window give right click in that command->programlines
    you can write all select  statements.
    4) How do we put dynamic page break in smart forms?
    you can define break point using break-point<>. syntax.
    5) in which system field contain the total page number of all forms in the currently processed print request in smart forms?
    SFSY-PAGE
    SFSY-JOBPAGES
    6) What is the name of function module used to calling smart forms?
    SSF_FUNCTION_MODULE_NAME
    =================
    1) What is the functionality of function module ‘control_form’?
    This function module is used to insert SAPScript control commands like NEW-PAGE etc from whithin the ABAP program.
    CALL FUNCTION 'CONTROL_FORM'
    EXPORTING
      COMMAND    =
    EXCEPTIONS
      UNOPENED   = 1
      OTHERS        = 3
    IF SY-SUBRC NE 0.
    MESSAGE ...
    ENDIF.
    2) How do we print the system date in this format ’15th Jan 2008’ on scripts?
    Use SET DATE MASK to change format of date display.
    3) What r the various print modes available in scripts?
    4) What is the tcode for text element?
    se91
    5) How do we draw horizontal line in scripts?
    &ULINE&
    6) How can we suppress the leading zeros for a field in scripts?
    &it_vbak-vbeln(Z)&
    7) In which system field is used to print current no page in scripts?
    &SYST-PAGE& of &SYST-FORMPAGES&
    Which f.m is used to reads text in sap scripts
    READ_TEXT functiomodule.
    Reward points

  • How can i write the data to PIC16F819 using labview?

    how can i write the data to PIC16F819 using labview?
    Need help!
    im using labview in gathering the datas that i need to right to the PIC, then after getting all the datas i am using another program which is ICD2 in order to write it to the PIC. Is it possible to do this task through LV? coz we are spending a lot of time transferring the data from LV to ICD2 manually and its prone to mistake as well.
    any suggestion?
    thanks,
    Pedz

    LabVIEW does not currently have a built-in method to communicate with
    i2c, but there are other vendors that sell devices to communicate in
    this manner with LabVIEW development kits.  One that I know of is
    from MCC... here is a link:  http://www.mcc-us.com
    They sell a device called iPort, and then you can buy LabVIEW VIs to go with it.  I hope this is helpful to you!
    john m

  • How can I write the chinese characters in a web with my magic mouse?

    How can I write the chinese characters in the search box with my magic mouse?

    You can do it with a trackpad but I am not sure about the mouse.  Take a look at his link, http://support.apple.com/kb/HT4288

  • How can i write the image in gif or jpeg format??

    how can i write the image in gif or jpeg format??

    thx someone else help me in another topic

  • How to copy out the song inside ipod nano

    how to copy out the song inside ipod nano

    Hi!, Go to the summary of your ipod and click to the square "Manually manage music and videos"

Maybe you are looking for