How do i zoom into a part of the screen during playback in QT 7.6.6?

I'm analyzing my racing vid from this past weekend and would like to zoom into a part of the screen and cant seem to figure this out.
Any help is appreciated.
Thanks, Joe
QT 7.6.6 Pro
Windows xp pro
crappy HP laptop but I can go to my desktop Mac Pro

There is no feature in QuickTime Player to zoom into a part of the screen. You can change the size of the full frame (using the options under the View menu or by just dragging the QT Player window larger), but that's the only "zoom" type capability that exists.
Regards.

Similar Messages

  • Pan & zoom in small part of the screen

    I would like to create an effect wear it looks like you are "dropping" pictures onto the screen (similar to the iMac screen saver). I can get the pictures to drop onto the screen no problem. Once it has dropped in place, I would like each of the pictures to pan and zoom in the place where they "dropped" without getting any larger. I want it to look like you have a bunch of pictures locked into place panning inside their frame. Thanks for the help!

    You might try using the free filter Quarter PIP.
    For your purpose you should set Position to <manual> so you can position the PIP by keyframing the +Horiz Manual+ and +Vert Manual+ controls; this will drop the picture into the screen. In addition set +Full Size+ to 1 or some other value between 0 and 1: this will allow you to pan the picture within the PIP using the +Slip Horizontal+ and +Slip Vertical+ controls. Full Size allows to zoom into the picture up to 200% the original size.
    Piero

  • Hi my iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?thanks

    hi my
    iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?
    also recovery mode shows up as a red icon instead of a blue one, not jail broken or had any third party alterations
    thanks

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

    how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

    Two ways to print a portion of a page: zooming or using the Snapshot Tool.
    ZOOMING:
    Zoom into the area you want to print.
    Click the Print icon.
    Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
    If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
    SNAPSHOT
    Choose Edit > Take A Snapshot.
    Drag a rectangle around the area you want to print. 
    Click the Print icon.
    Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
    To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
    Hope this helps!

  • This is about iPhoto:  I need to print the FULL IMAGE as shown on the screen:  the image is SQUARE (equal on four sides).  iPhoto keeps cropping it into a rectangle - THIS IS NOT ACCEPTABLE!  How do I get what I see on the screen in print form???

    I need to print the FULL image as shown on the screen - the image is SQUARE (equal on all four sides).  iPhoto keeps cropping it into a rectangle - this is not acceptable!  How do I get what I see on the screen into print form?

    Like Terence explained:
    OT

  • My ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

    my ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch.

    I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch, it Should be having so much problems. Thanks for your help.
    iPad, iOS 7.0.4

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • How do i zoom in a video on the iphone 5

    How do i zoom when taking video on the iPhone 5?

    I'm having the same issue. It had the feature before and worked beautifully, and now when I try I do the same pinching/stretching method and nothing happens. I don't have an option to zoom anywhere in photo or video.

  • In inches, how high is the part of the screen actually usable?

    In inches, how high is the part of the screen actually usable for text or images?... on the new iMac Apple computer models.
    In inches, how wide is the part of the screen actually usable for text or images?...
    Message was edited by: dsaklad@ zurich.csail.mit.edu

    You use [Pythagorean theorem|http://en.wikipedia.org/wiki/Pythagorean_theorem]
    !http://upload.wikimedia.org/math/1/4/5/1455314a78f39a594485adbaf74d63f9.png!
    to calculate how many pixels would go along the diagonal, C in the equation. You know A and B from the resolution numbers.
    Divide that pixel number (C from above) by the diagonal measurement in inches to get the +pixels per inch+ number (PPI).
    Divide the horizontal and vertical resolution numbers by the PPI number, to get the measurements in inches.

  • How can I quit my iPhoto screen that as crashed and locked on. The locked screen has no iPhoto file list on the left and the part of the screen that should have uploaded photos is blank except for the rotating download icon in the centre of screen. Help?I

    My SD card reader has caused my iPhoto screen to be locked with no list of files on the lefthand side and a blank main photo area apart from the rotating download icon operating in the centre of the photo part of the screen.
    I have tried to quit iphoto but when I restart it the same locked screen appears.
    I believe I caused this problem when I removed my SD device without first ejecting it when the blank screen appeared without downloading my new photos.
    Can anyone help a 66 year old computer illiterate fool ?.
    Regards

    Use Force Quit (under the Apple menu at the top) to close iPhoto.  Then try opening it again.  If it locks up again force quit and try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists.
    If the problem does not persist try the following: make a temporary, backup copy (select the library and type Command+D) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If the problem persists in the test library do the following:  make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • Vertical lines on the lower part of the screen

    Hello Ma’am/Sir!
    Lines have appeared in the lower part of the screen and I do not know how to fix this. This is the third time it happened. The first and second time it happened, the lines were suddenly gone several weeks after. I want to know what is the main cause of this problem and how would it be fixed. Thanks!

    I took my laptop to Staples and I bought a new one. The Tech plugged my old computer into an external monitor and the problem was not there. Wow. I bought the new computer and when I got home and rebooted the old computer, the problem was gone...........I'm not saying that plugging in the external monitor was the solution but something changed. Anyway, I would try plugging it into another monitor, or the tv or something just to eliminate that issue. Who knows. I'm keeping the new computer because it was a really good deal (wanted windows  7 pro), plus you say that the problem will show up again. Crazy.

  • I dropped my ipod in water and it got in the crack that isnt on the touch part of the screen  but more towards the top, now the screen won't work

    I recently dropped my ipod and the part above the touch part of the screen shattered to were you could see one of the screws in the top left corner. i dropped the top part in water and caught it before it could go more than half way in but the water got into that part. the screen will turn on and change but the touch part wont work. all the buttons are working though. Please helppp!!!!!!!!!!!!!!!!!!

    Dry it is rice as described here:
    How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
    Just let the battery die if you can't turn it off.

  • Is it possible to use a part of the screen area

    Maby a silly question, but has anyone an idea how to play a game for example on a partial area of the hugh 27inch screen? Is there a utility that places full screen applications like games within a window (games that don't have a window mode on its own)?
    It seems to me it would be practical (especially) for children to use just about 20inch on the lower part of the screen when playing games with quick moving objects.
    tnx

    The variable "name" is a lot less important than you think. In fact, when your code is compiled, the computer doesn't care one jot about the name of the variable.
    You should not worry about trying to do this, but rather should tell us the reason why you would even want this. If we knew that, we could show you a better way, guaranteed.

  • Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

    Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

    I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

  • Screen recording - recording part of the screen or low resolution

    I want to record part of the screen in quick time x, has anybody found a way to do this?
    As a work-around, I tried reducing the screen resolution to 640x480 or 800x600 but the recorder doesn't seem to pick anything up at this resolution. After recording nothing happens then when i switch back to full resolution i get the message:
    *Recording failed because no data was received.*
    Make sure that the media input source is turned on and playing.
    Message was edited by: nz_strabo

    I am just trying to figure out how to record a screen shot, i dont care if its full or part screen, any advice for me?
    Not sure if there is any difference between OS 10.6.1 and 10.6.2, but all I did was select the "New Screen Recording" File menu option and press the record button (circle with red dot in center) to make a test recording which was automatically saved in the Movies folder when the "stop recoding" key shortcut sequence was pressed. As to SnapzProX, it is a commercial program which you can purchase. It allows fullscreen/partial screen recordings and can be set up to record a fixed area of the screen or a fixed size portion of the screen area which follows the cursor around the screen.

Maybe you are looking for

  • Data not go to table?How to Resolve it?

    Hi All, I created one form based upon a table.In that form i want one field value as automatic value from another table. I write the sql query to a particular field.the value comes to that form automatically.But the problem is when i submit that part

  • Help in calling stored procedure with parameter in JSP

    I need to know how to call this stored procedure in JSP here is my Stored procedure in oracle 9i: CREATE OR REPLACE procedure broker_activity (p_broker_id IN number,p_TotalValue out number,p_CrossValue out number, p_blockValue out number, p_MktWeight

  • How to use quotes in the forum

    Whenever I use the quote functionality in these forums the actual quotes are preceded by code.  I don't see this happening to most others. What am I doing wrong?

  • Mapping the C&Fs sales data

    The client needs to map the the sale(Sales frm C&F to dealer) of C&F in his sap system.The C&f will provide data in excel sheet every month and for analysis purpose it should be captured in sap of the client. How should it be done?? 1.Can i take the

  • How to use a vector to navigate my database? please help me.. ty

    how to use a vector to navigate my database? please help me.. ty