How do install EPC header on the ASR router? or is it now part of the IOS?

There was a discussion of using the router to look at the trace capture from the router, I downloaded the EPC header, but don't know to install. Is there any documentation on how to install the script file onto the ASR router? Thank you
Osh

Which script is this exactly?

Similar Messages

How to Install .CAP file in the Java Card?

Hi Friends..
How to install *.CAP* file in the Java Card?..
I've GPShell script as follows :
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
install_for_load -pkgAID a00000006203010c01 -nvCodeLimit 500 -sdAID A000000003000000
load -file HelloWorld.cap
card_disconnect
release_contextwith that script i can load HelloWorld.cap file successfully..
Now, how to install the HelloWorld.cap file?..
if i add script : load -file HelloWorld.cap i got this error :
install -file HelloWorld.cap
file name HelloWorld.cap
Command --> 80E602001B09A00000006203010C0107A00000015100000006EF04C60201A80000
Wrapped command --> 84E602002309A00000006203010C0107A00000015100000006EF04C60201
A80030C859793049B85300
Response <-- 6985
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of
use not satisfied.)i ask this question because when i tried to select the applet through its AID, by this script :
establish_context
card_connect -readerNumber 2
select -AID a00000006203010c0101i got this message error : select_application() returns 0x80216A82 (6A82: The application to be selected could not be found.)
but there's exactly any that AID in my Java Card..
here's is the list of AID from My Java Card :
C:\GPShell-1.4.2>GPShell listgp211.txt
mode_211
enable_trace
establish_context
card_connect -readerNumber 3
* reader name OMNIKEY CardMan 5x21-CL 0
select -AID a000000003000000
Command --> 00A4040008A000000003000000
Wrapped command --> 00A4040008A000000003000000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
A026E01029000
Command --> 8050000008AAF7A87C6013BC0300
Wrapped command --> 8050000008AAF7A87C6013BC0300
Response <-- 0000715457173C2A8FC1FF0200937A55C288805D8F2A04CCD43FA7E69000
Command --> 848201001023CA18742D36165ED992CFF2146C3D51
Wrapped command --> 848201001023CA18742D36165ED992CFF2146C3D51
Response <-- 9000
get_status -element 10
Command --> 80F21000024F0000
Wrapped command --> 84F210000A4F004FF8BE1492F7275400
Response <-- 0CF0544C00004D4F44554C415201000009A00000006203010C010100010AA000000
06203010C01019000
GP211_get_status() returned 2 items
List of Ex. Load File (AID state Ex. Module AIDs)
f0544c00004d4f44554c4152        1
a00000006203010c01      1
        a00000006203010c0101
card_disconnect
release_contextPlease help me..
And please correct me if i'm wrong,,
Thanks in advance..

Any suggestions for my question?..
Please help me..
Thanks in advance..

How to Install Windows 7 Without the Disc

1a) Here is very useful article from PCWorld.com. The article is entitled "How to Install Windows 7 Without the Disc" and means just what it says. The article also has links to Magical Jelly Bean Keyfinder and legitimate Windows 7 ISOs from Digital River, a licensed distributor of Microsoft software. The article lists "Step 1" as;
"Find your Windows 7 product key: Typically this 25-character alphanumeric string is printed on a sticker affixed to your PC or on documentation included with your PC. Alternatively, you can use a keyfinder program such as Magical Jelly Bean Keyfinder to pull your product key from the Registry. You need your product key to reinstall Windows."
1b) Using a key finder, however, is only useful if the Windows 7 product key was printed on a sticker (Microsoft Certificate of Authenticity) affixed to your PC, on documentation included with your PC, or sent via email by Microsoft. Assuming your computer came from one of the big brand computer manufacturers... HP, Sony, Dell, Gateway, etc... as most do, it uses a generic "mass activation" OEM SLP key. Trying to use this key by itself isn't going to work. This OEM SLP key needs to be mated with an OEM SLP certificate and an appropriate OEM BIOS with a proper SLIC table.
1c) Here is where ABR Beta With Windows 7 Support comes to the rescue. Follow the "How to use it" section of ABR for Windows Vista for information and instructions on how to use ABR. The steps listed for Vista apply to Windows 7 as well. Perform the "activation backup" to "backup" and save the OEM SLP key and OEM SLP certificate. Save the entire ABR folder to an external location for later use. This will allow you to pre-activate your "clean" Windows 7 install on the computer you pulled the key and certificate from.
1d) Now install Windows 7 from your new "Windows 7" disc or USB stick, following all prompts as needed. Don't enter a Windows 7 product key if request. Also, don't allow Windows to try to auto-activate. Once Windows is fully installed, run ABR "activation restore" to "restore" the previously backed up product key and certificate to the new Windows 7 install. Verify that Windows is activated, repeat "activation restore" if needed.
2) Here is another useful article, this time from SevenForums.com. This arcticle is entitled "Clean Reinstall - Factory OEM Windows 7" and provides detailed steps required to backup your computer, audit current hardware and software, locate software and drivers, install and activate Windows 7, and create a Windows 7 Backup Image of your fresh install.
Good luck.
Links to additional Windows 7 SP1 "Editions" and "Languages" can be found HERE and HERE.
Link to "ei.cfg Removal Utility". The "ei.cfg Removal Utility" is a simple tool that will remove the ei.cfg from any Windows ISO disc image, thereby converting the image into a "universal disc" that will prompt the user to select an edition during setup instead of being forced to use different discs for different versions of Windows 7.
Direct link to Windows 7 USB/DVD Download tool.
<Cross posted to Notebook Operating Systems and Software for Notebook, Laptop, and Netbook users>
EDITED by Frank on 8/28/2013
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

ervis,
Before formatting the hard drive you should have been able to use the HP Recovery Manager to create your recovery discs or perform a system recovery. This is provided the recovery partition wasn't already corrupt or damaged. If the "D:" HP Recovery partition is missing or damaged and you don't have a set of HP Recovery Discs, you will need to use the information in my previous post to get your computer up and running again.
The information in the document referred you to applies to several different "types" of installations;
Using ABRbeta is only needed if you have an active OEM factory SLP (system locked preactivated) installation of Windows. You use ABR to pull the factory key and certificate off the computer, to reuse it on the same computer with a clean Windows install.
If you are just installing Windows and are going to use the Windows 7 product key on the COA on the side of your computer, all you need to do is download the same version of Windows that your key is for and burn the ISO. Now install Windows answering or following all prompts as needed (except do not enter the Windows product at this time... it will be entered later). Once Windows has completely installed, enter the key and activate it. Your Windows 7 OA key should work on a SP1 install without issue.
The only thing I see that could mess things up, is the language of the install. If you are still having trouble activating Windows, please reference the ISO you download and a post a photo of your Windows COA
with the key erased or Xed out.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to install archlinux2008.6 from the hard drive?

How to install archlinux2008_6 by archlinux2008_6_i686.iso in hard drive?
i get the booting files(archlive.img,vmlinuz26) in the archlinux2008_6_i686.iso and put them in c:\
in the grub command mode the use of these code:
root (hd0,0)
kernel (hd0,0)/vmlinuz26
initrd (hd0,0)/archlive.img
boot
i get those from : http://blog.chinaunix.net/u/31909/showart_1121360.html
but it stopped , some code printing on the screen...................it can not continue..
from the google i find :"this method must use the "vmlinz "and the "initrd.img",this files is from archlinux2008.03.iso
i don't understand .......
i must download the archlinux2008.03.iso?...........it's too much trouble.
How to install archlinux2008.6 from the hard drive? or who could give me the two files (the "vmlinz "and the "initrd.img") from archlinux2008.03.iso?
e mail: [email protected]
THS.
--------this is my topic for the first time in english, I hope that you can know what i said ~~~
Last edited by 自学linux (2008-08-29 03:14:54)

自学linux wrote:
http://blog.chinaunix.net/u/31909/showart_1121360.html
A waste of CD-ROM...........,in china, many people install linux just by iso,don't burn the iso,
could you give me the two files (the "vmlinz "and the "initrd.img") in archlinux2008.03.iso, those can't find in archlinux2008.06.iso
my email :[email protected]
Do you have a USB stick you could copy the image to? Where I live, a CD costs $0.50 at most. To put that into perspective. A coffee costs a $1.00. Either a CD costs a lot more than a coffee where you live or are you telling me you'd rather get a lot of grey hair than buy half a coffee?
Sorry I can't be of much help. I don't know how to do this method of installation. If you're desperate, you could try making an extra partition, and trying something with that. Take a look at these:
http://wiki.archlinux.org/index.php/Fas … nux_System
http://wiki.archlinux.org/index.php/Ins … her_distro
Last edited by solarwind (2008-08-27 04:37:59)

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

How to install .exe applications and the java on m...

hi ! sorry if this has already been discussed but i wanted to know ~~~ how to install .exe applications and the java on my n9 ~~~ ... because i wanted to use plenty of other apps which are not supported but these 2 would help fix the issue

Is it stil not possible to install java applications on N9?
Files containing JAD and JAR-ending in the file name.
I am not familiar with Nokia N9 so I ask even if I suppose that JAR and JAD files are not able to install on a Nokia N9.
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

How to install forms 6i on the same machine oracle8i installed

I have oracle8.1.6 release 2 installed on microsocft windows 98. How do I installed forms 6i on the same machine. when I installed forms6i, it has overwritten the resgistry settings and I cannot run database any more. Please give me some ideas how to install all these on the same machine on windows 98 , operating system DOS.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Simon Jennings ([email protected]):
You need to use seperate Oracle homes.<HR></BLOCKQUOTE>
You have to install Forms6i on a different Oracle_Home not Default_Home, which I believe is where you installed Oracle8i.

How to install flash player for the gaming app "raptr"?

how to install flash player for the gaming app "raptr"?

Hi,
If you wants to install flash for any browser just visit http://get.adobe.com/flashplayer/ from that browser and click on "Install Now" button to install flash player for that browser.
But since i have found that raptr is a standalone game so raptr support team would be the right contact who can guide you well that which Flash player plugin they are using in their game. And this is what i have found on there support page Raptr wants me to download "Flash for Other Browsers". Where do I get that? : Raptr Support
You can follow the steps on that link, I hope it will solve your problem.
-Varun

How to install several instances of the same application on a computer?

Hej,
I have an application in LV 2009, where I have created an installer. The installer installs to a directory called \Receiver relative to the Program Files directory. If I install this once to a computer, everything is OK.
However, I want to install the same application twice on the same computer. There should be no conflicts between the two applications, since I can configure them to work on different directories and ports. But if I call the installer again, and selects another directory, nothing is installed and I get the message "Installation Summary - No software will be installed or removed". It seems like the installer ignores that I have selected another directory, and just uses the default directory, relative to the Program Files directory.
Anyone knows the trick, how to install several instances on the same computer ?
BR, Jan
Jan Nielsen
Freelance system analyst and LabVIEW programmer

Hi Jan,
This is so because each installer has a GUID that is used to check whether the application needs to be upgraded or not. (It's a Microsoft function).
What you can do is create a new installer with a different GUID (copy the installer in the projects), and check witha text editor whether this GUID has changed.
But any specific reason you need two seperate installs? You can run the application twice with a specific INI token:
allowmultipleinstances=True
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Need help ...just bought a mac mini, how to install adobe lightroom4 without the cd-rom?

need help ...just bought a mac mini, how to install adobe lightroom4 without the cd-rom?

You could download it as a trial version, and enter your serial number when prompted to buy.
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom

How to install front row on the dock ?

how to install front row on the dock ?

Find it in your applications directory and drag it to the dock. Anywhere left of the divider is OK.
Regards,
Captfred

How Do I Wrap Text Like the iOS Camera App?

Hello. I am in yearbook, and I have been challenged with designing the cover of the yearbook, and I have been having a few problems along the way. One of these problems is to wrap text. Specifically, I'm stuck on how I would wrap text like the iOS camera app on the bottom of the screen. The words seem like they are wrap around a 3D object to give it that effect, but I can't really tell. If anyone can help me, it would be greatly appreciated.

JJMack wrote:
There is a big difference between being a casual user than real work or development. I own a iPod its a great MP3 player and a device I can display my pictures on out of my pocket. I'll even Facetime my kids at time to see my grand kids or help fix something. My wife has a mini iPad for quick internet access and quire music and uses her iPod to entertain our two year old grandson with games. She uses a Canon 1D mark 4 and I a Cannon 1D mark II. The only use the iPad and iPod cameras get is Facetime. No iOS apps are use to work on images they have no value when you have Photoshop. The iPod is better for displaying image then the iPad mini it has a 3:2 aspect ratio display and travels better the the mini iPad which has a 4:3 aspect ratio display. I also crop image for display on wall mounted HDTV. The iPad is better for casual internet access then the iPod. All our kids have iPhones and they all use computers either Mac or PC for work and internet access. When you have a Unix or Windows why would you want to touch an iOS device for work or serious internet access. Apple mobile devices are convenient for casual use and grand kids don't get that dirty finger painting on them as they do using real paint. Nothing of real value is maintained on an iOS device.
Well...there's Photoshop Touch and Photoshop Mix as well as Lightroom Mobile. It could be argued that they're don't exactly mirror their desktop cousins, yes, but they weren't meant to be. They were meant as extensions to the desktop experience. (e.g., Lightroom Mobile lets one work with the RAW images they have in their Lightroom desktop collections.)
The more powerful Windows tablets can run Photoshop desktop (like Photoshop CC) too.
@bluebocat: Are you looking for text with a perspective? Like it has a vanishing point? As if it was turned in a certain direction in 3D space?

How long should it take for the iOS 5 iPhone software to update?

How long should it take for the iOS 5 iPhone software to update? Mine is taking a ridiculous amount of time, to the point where I need to stop it as i need to go out and need my phone !

Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

How to install Yosemite after deleting the entire partition?

I am trying to install a clean version of Yosemite via Mac OSX utilities. I erased my entire operating system and now want to do a clean install. I have entered the internet recovery mode by pressing command R once the operating system was deleted and restarting the machine.
I currently have four options which are restore from Time Machine backup, reinstall Mac OS X, get help online, Disk Utility.
as of now the option reinstall Mac OS X is telling me that it will set up and install a new copy of Lion. How do I have it install the Yosemite?
when I first purchased in 2012 it did come with the Lion operating system but I have downloaded and installed Yosemite from the App Store.

Oh, but it is since you have already erase the volume. What more do you wish to do? If you want to do an online Internet Recovery and your computer is able to do so, then do this:
Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

How to install OpenGL header and library files

I install gtkglext from its source code and get an error after the 'configure' command.
bash-3.00$ ./configure
checking GL/glx.h usability... no
checking GL/glx.h presence... no
checking for GL/glx.h... no
configure: error: Cannot find GLX header
I guess the OpenGL files are not installed during Solaris 10 installation. Could someone tell me where can I get opengl files? Are they in the Solaris 10 installation disks? How to install opengl files?

It's hard to believe that no one here (official Sun
developer network) can answer my question. Maybe few
people develop under Solaris.That must be it.

How do install EPC header on the ASR router? or is it now part of the IOS?

Similar Messages

Maybe you are looking for